PFD Help

[737NUT]

I am trying to run the 767 style Efis and gaige set-up and am having this issue.

It keeps reverting back to 737NG stly PFD only after it's on for about 1-3mins. I set the type in the PFD.ini to 767 and force efis=on re-set everything and it works fine for 1-3mins then changes all on it's own for no reason.

How do i get it to stay on the 767 style display???

Thanks

[npbosch]

Do you have an 767 selected in the cdu?
Does the mcp has the 767 selected?

[737NUT]

Do you have an 767 selected in the cdu?
Does the mcp has the 767 selected?


Yes it is selected,

MCP is not running. PFD and CDU only

[Trevor Hale]

If you have the CDU Set to 767 and in the GC.INI you should have aircrafttype=CDU

then your net directory must not be working correctly.

Check to see you have proper access to the cdu Net directory.

[737NUT]

If you have the CDU Set to 767 and in the GC.INI you should have aircrafttype=CDU

then your net directory must not be working correctly.

Check to see you have proper access to the cdu Net directory.


They are on the same computer. :)
I can control the PFD/ND with the CDU no problem.


Tried setting it to CDU as well in the pfd.ini. Same problem

[Thomas Richter]

Did you check in GC Menu (ESC) "Force 767EFIS" or "Force 767EADI"?
See attached pic.

[737NUT]

weird thing, that option isn't available on my menu, it is a blank spot! Latest version as well.

[Thomas Richter]

Special this line is ever there because it is needed to switch between the differend systems, 737 old/NG mode, 767 EFIS/EADI mode ...
There must be something wrong on your system.
Did you try just clicking on that "empty" line ?