View Full Version : Annunciator backing
marius
04-08-2008, 08:25 AM
Does anyone know of an easy way to make annunciator backings for lighting a 737 overhead? I don't particularly want to mould 101 backings myself and wouldn't even think of paying the high prices from some of our better known cockpit suppliers.
Is there maybe a rectangle pipe that is the same size? I could cut it and glue on the back plates and then drill holes for LEDs.
Jackpilot
04-08-2008, 12:09 PM
Do exactly that a hundred and one times plus engrave 101 legend front plates , connect 200+leds figure out material + your time and you will start to realize that the high price is not that high!!
My 2 cents of course..
Michael Carter
04-08-2008, 12:19 PM
You can make them yourself.
Determine the size they are and find a supplier that handles square PVC or aluminum stock.
McMaster-Carr in the U.S. carries it, but shipping to Down Under might be costly. Try and find a local distributor.
Nothing is impossible to make or build.;)
magicaldr
04-08-2008, 02:37 PM
Dig around the net, I am sure as well as good instructions on Mikes site (http://www.mikesflightdeck.com/annunciator_lights_1.htm) I have also seen some made out of a lego brick.
QF6228
04-08-2008, 03:46 PM
AH HA!!!! Lego Brick!! Marius I think this maybe the solution ;).
Joe Cygan
04-08-2008, 04:03 PM
Dig around the net, I am sure as well as good instructions on Mikes site (http://www.mikesflightdeck.com/annunciator_lights_1.htm) I have also seen some made out of a lego brick.
This is great! It is amazing what one can find to make things work.
Tomlin
04-08-2008, 04:27 PM
This is great! It is amazing what one can find to make things work.
My thoughts exactly!
marius
04-08-2008, 06:08 PM
Jackpilot,
I am talking about backings only mate. No globes. No engraving. Just the little rectangle plastic covers to stop light from escaping.
I actually thought of Legos myself and then quickly dismissed the idea thinking there is no way lego bricks are the same size. I see that the standard 2x8 block is 16mm x 32mm x 9.6mm.
QF6228
04-08-2008, 06:11 PM
I'm still going to give it a go ;)
HansJansen
04-11-2008, 12:53 PM
Hi,
a few pointers to provide food for thought...
http://home.hccnet.nl/jwopdenakker/building%20tip.html
http://wiki.varxec.net/eaton_type
... but "some" work will be necessary, as stated before!
Hans