ian@737ng.co.uk
04-21-2008, 10:28 PM
Good Day Gentlemen......
i discovered a while ago that the PMDG 737 Idle Cutoff Levers respond to the Fuel Valve command in FS9 and not the mixture commands as do most add ons.
FSUIPC only gives us the 'Toggle' Option in it's menu, which means that synchronisation is never going to be 100% (how many times have you forgot to set a switch before starting up?)
ah! , but i've discovered that you can manipulate the offset in FSUIPC to give an accurate on/off state on the levers.
in the FSUIPC Buttons and Switches Menu, in the FSCONTROL dropdown Menu is an item Offset Byte Set. this is where it's at. the parameter for Eng 1 Fuel valve is 3590 and for the Eng 2 Fuel Valve is 3594 (don't know if this works with the 747, but Eng 3 is 3598 and Eng 4 is 359C). setting the parameter (based on your switch) will give you an accurate on/off state of the levers. parameter 1 for valve open and 0 for valve closed.
this only works with continuosly on switches (toggle or microswitch) and not with pushbuttons i'm afraid.
simply select your button or switch and let FSUIPC identify it. select the Offset Byte Set item, change the offset to x3590 for eng1 (or the offset for the engine valve you want to control) and put a zero in the parameter box if you want the valve closed when the switch is closed (or vice versa). then go down to the 'when button released' section and reverse the parameter.
now i've got to get FSInterrogate out and see what else we can find.
have a great day everybody..... ian
i discovered a while ago that the PMDG 737 Idle Cutoff Levers respond to the Fuel Valve command in FS9 and not the mixture commands as do most add ons.
FSUIPC only gives us the 'Toggle' Option in it's menu, which means that synchronisation is never going to be 100% (how many times have you forgot to set a switch before starting up?)
ah! , but i've discovered that you can manipulate the offset in FSUIPC to give an accurate on/off state on the levers.
in the FSUIPC Buttons and Switches Menu, in the FSCONTROL dropdown Menu is an item Offset Byte Set. this is where it's at. the parameter for Eng 1 Fuel valve is 3590 and for the Eng 2 Fuel Valve is 3594 (don't know if this works with the 747, but Eng 3 is 3598 and Eng 4 is 359C). setting the parameter (based on your switch) will give you an accurate on/off state of the levers. parameter 1 for valve open and 0 for valve closed.
this only works with continuosly on switches (toggle or microswitch) and not with pushbuttons i'm afraid.
simply select your button or switch and let FSUIPC identify it. select the Offset Byte Set item, change the offset to x3590 for eng1 (or the offset for the engine valve you want to control) and put a zero in the parameter box if you want the valve closed when the switch is closed (or vice versa). then go down to the 'when button released' section and reverse the parameter.
now i've got to get FSInterrogate out and see what else we can find.
have a great day everybody..... ian