Airbus radio stack.

[brianwilliamson]

Have successfully used IOCards to do the complete Airbus radios.
If anyone requires the script for this, please let me know. All you will need to do is fill in the numbers of your switches/leds/rotaries and you should be running in minutes.
One problem I had originally that it would not function 100 percent on the networked computer, so I then loaded it to the FSX computer and away it went properly.
http://www.mycockpit.org/photopost/data/528/RADIO-STACK.jpg

Cheers.........................Brian W.

[Buddym]

Hi Brian,

That is great news, I will be using the same setup I hope. I saw your forum post on the OC site, wondered where you left off with the problem... Are you still using the IOcards software or have you moved to SIOC? I ahve been playing with the IOcards software, but have not ventured into SIOC at all. Also, what is your scheme for the whole number/decimal number rotary setup? Are you using dual concentic rotary encoders or a single and then a pushbutton to toggle the single rotary function?


Buddy

[brianwilliamson]

Still using IOCards software, and using dual concentric encoders. It is a fairly simple system, and I have not as yet ventured into SIOC !!
It will do the job adequately for the radios so I would stick with this way of doing it. Will try the Transponder shortly and get it running as well off the same system.
Brian W.

[skalarki]

Great job Brian,

Shortly I will be dooing my radios and expander panels as well. So your experience will be really helpfull and when I am ready will ask you for script.

Thanks

[Matt Olieman]

NICE JOB Brian..... as always :) :) :) Extremely impressive.

Matt Olieman

[djcevera20]

brian looks great i would be interested in looking at the script to get some ideas as im new to this and will not be using the sioc language as well

[brianwilliamson]

IOCARDS CONFIGURATION...........A320 RADIO-------------BRIAN W
_____________________

VARIABLES
=========
Name Address Length Function Initial Value
____ _______ ______ ________ _____________
LIBRE $3210 1 1
DIS_COM_SB $311A 2 COM 1800
DIS_NAV1_SB $311E 2 NAV 800
DIS_COM2_SB $311C 2 COM 1800
LIBRE2 $3211 1 0
LIBRE6 $3215 1 0
R_COM_SB $311A 2 COM 1800
R_NAV1_SB $311E 2 NAV 800
R_COM2_SB $311C 2 COM 1800
SWAP $3123 1
COM1_AC $034E 2 COM
NAV1_AC $0350 2 NAV
COM2_AC $3118 2 COM
LIBRE4 $3213 1 0
LIBRE5 $3214 1 0
DIS_ADF $034C 2 ADF1
R_ADF $034C 2 ADF1 356
DIS_TXP $0354 2 SQW
R_TXP $0354 2 SQW 1200
DIS_NAV2_SB $3120 2 NAV 900
LIBRE3 $3212 1 0
R_NAV2_SB $3120 2 NAV 900
NAV2_AC $0352 2 NAV
FS_COM1_SND $3122 1
FS_COM2_SND $3122 1
FS_BOTH_SND $3122 1
FS_NAV1_SND $3122 1
FS_NAV2_SND $3122 1
FS_MKR_SND $3122 1
FS_DME_SND $3122 1
FS_ADF_SND $3122 1

SW-NORMAL
=========
Name N.Input Variable Value_ON/Key Value_OFF/Key Type
____ _______ ________ ____________ _____________ ____
COM1A 5 LIBRE 1 P
COM1B 5 LIBRE2 0 P
COM1C 5 LIBRE6 0 P
NAV1A 0 LIBRE 0 P
NAV1B 0 LIBRE2 1 P
NAV1C 0 LIBRE6 0 P
COM2A 2 LIBRE 0 P
COM2B 2 LIBRE2 0 P
COM2C 2 LIBRE6 1 P
S_COM1 4 SWAP 8 0
S_NAV1 4 SWAP 2 0
S_COM2 4 SWAP 4 0
S_NAV2 4 SWAP 1 0
COM1D 5 LIBRE4 0 P
COM1E 5 LIBRE5 0 P
NAV1D 0 LIBRE4 0 P
NAV1E 0 LIBRE5 0 P
COM2D 2 LIBRE4 0 P
COM2E 2 LIBRE5 0 P
ADFA 3 LIBRE 0 P
ADFB 3 LIBRE2 0 P
ADFC 3 LIBRE6 0 P
ADFD 3 LIBRE4 1 P
ADFE 3 LIBRE5 0 P
TXPA 40 LIBRE 0 P
TXPB 40 LIBRE2 0 P
TXPC 40 LIBRE6 0 P
TXPD 40 LIBRE4 0 P
TXPE 40 LIBRE5 1 P
NAV2A 1 LIBRE 0 P
NAV2B 1 LIBRE2 0 P
NAV2C 1 LIBRE3 1 P
NAV2D 1 LIBRE4 0 P
NAV2E 1 LIBRE5 0 P
NAV2F 1 LIBRE6 0 P
COM1F 5 LIBRE3 0 P
NAV1F 0 LIBRE3 0 P
COM2F 2 LIBRE3 0 P
ADFF 3 LIBRE3 0 P
TXPF 40 LIBRE3 0 P
COM1_SOUND 34 FS_COM1_SND B+7 B-7 P
COM2_SOUND 32 FS_COM2_SND B+6 B-6 P
NAV1_SOUND 28 FS_NAV1_SND B+4 B-4 P
NAV2_SOUND 27 FS_NAV2_SND B+3 B-3 P
MKR_SOUND 35 FS_MKR_SND B+2 B-2 P
DME_SOUND 33 FS_DME_SND B+1 B-1 P
ADF_SOUND 31 FS_ADF_SND B+0 B-0 P

SWR / ENCODERS
==============
Name Initial Input Variable Aceleration/-K Cte. Inc./+K Type
____ _____________ ________ ______________ ____________ ____
R_COM1_H 16 R_COM_SB 4 5 2
R_COM1_L 13 R_COM_SB 1 100 2
R_NAV1_H 16 R_NAV1_SB 4 5 2
R_NAV1_L 13 R_NAV1_SB 1 100 2
R_COM2_H 16 R_COM2_SB 4 5 2
R_COM2_L 13 R_COM2_SB 1 100 2
ROT_ADF 16 R_ADF 5 1 2
ROT_TXP_H 16 R_TXP 1 1 2
ROT_TXP_L 13 R_TXP 1 64 2
R_NAV2_H 16 R_NAV2_SB 4 5 2
R_NAV2_L 13 R_NAV2_SB 1 100 2
R_COM1_H 25 R_COM_SB 1 5 0

DISPLAYS 7-S
============
Name Initial Digit Variable Numbers Options
____ _____________ ________ _______ _______
COM1_SB 4 DIS_COM_SB 4 N
NAV1_SB 4 DIS_NAV1_SB 4 N
COM2_SB 4 DIS_COM2_SB 4 N
COM1_AC 0 COM1_AC 4 N
NAV1_AC 0 NAV1_AC 4 N
COM2_AC 0 COM2_AC 4 N
ADF 0 DIS_ADF 4 N
TXP 16 DIS_TXP 4 N
NAV2_AC 0 NAV2_AC 4 N
NAV2_SB 4 DIS_NAV2_SB 4 N

OUTS & CONFIG
=============
Name N.Output Variable Value ON Value OFF
____ ________ ________ ________ _________
IFNAV1 *NAV1_SB LIBRE2 0
IFCOM2 *COM2_SB LIBRE6 0
IFCOM1 *COM1_SB LIBRE 0
LEDCOM1 15 LIBRE 1
LEDNAV1 14 LIBRE2 1
LEDCOM2 12 LIBRE6 1
IFRCOM1 #R_COM1_H LIBRE 0
IFRCOM11 #R_COM1_L LIBRE 0
IFRNAV1 #R_NAV1_H LIBRE2 0
IFRNAV11 #R_NAV1_L LIBRE2 0
IFRCOM2 #R_COM2_H LIBRE6 0
IFRCOM22 #R_COM2_L LIBRE6 0
IFSCOM1 %S_COM1 LIBRE 0
IFSNAV1 %S_NAV1 LIBRE2 0
IFSCOM2 %S_COM2 LIBRE6 0
IFCOM1AC *COM1_AC LIBRE 0
IFNAV1AC *NAV1_AC LIBRE2 0
IFCOM2AC *COM2_AC LIBRE6 0
IFADF *ADF LIBRE4 0
IFTXP *TXP LIBRE5 0
IFRADF #ROT_ADF LIBRE4 0
IFTXPH #ROT_TXP_H LIBRE5 0
IFTXPL #ROT_TXP_L LIBRE5 0
LEDADF 11 LIBRE4 1
LEDTXP 40 LIBRE5 1
ACTCOM1 >R_COM_SB SWAP 0
ACTNAV1 >R_NAV1_SB SWAP 0
ACTCOM2 >R_COM2_SB SWAP 0
IFNAV2 *NAV2_SB LIBRE3 0
LEDNAV2 13 LIBRE3 1
IFRNAV2 #R_NAV2_H LIBRE3 0
IFRNAV22 #R_NAV2_L LIBRE3 0
IFSNAV2 %S_NAV2 LIBRE3 0
IFNAV2AC *NAV2_AC LIBRE3 0
ACTNAV2 >R_NAV2_SB SWAP 0
LED_COM1 17 FS_COM1_SND B7
LED_COM2 19 FS_COM2_SND B6
LED_NAV1 23 FS_NAV1_SND B4
LED_NAV2 24 FS_NAV2_SND B3
LED_MKR 16 FS_MKR_SND B2
LED_DME 18 FS_DME_SND B1
LED_ADF 21 FS_ADF_SND B0

DEF.FUNCTIONS
=============
Name If Value > Then Valor = If Value < Then Value = Value=Value x Value=Value +
____ ___________ ____________ __________ ____________ _____________ _____________


SERVO-E.
========
Name Initial Output Variable Left Pos. Center Pos. Right Pos.
____ ______________ ________ _________ ___________ __________


STEEP-E.
========
Name Initial Output Variable Aceleration Type
____ ______________ ________ ___________ ____


ANALOGIC INPUT
==============
Name Initial Input Variable Left Pos. Center Pos. Right Pos.
____ _____________ ________ _________ ___________ __________


LCD DISPLAY
===========
Name Initial Output Variable Initial Digit Numbers Options
____ ______________ ________ _____________ _______ _______


________END_OF_REPORT_______ (IOCards by Manolo Vélez)
This is not quite complete, but fully workable. Use the manual and you will get the hang of it.
Regards..............Brian W.

[totalflyer]

Great job Brian... Your work is truly beautiful... :)

[PittsburghLever]

Hi Brian,

Beautiful setup. Out of curiosity: What panels are those? I am thinking both the RMP and the audio panel?

[Matt Olieman]

Hi Brian,

Beautiful setup. Out of curiosity: What panels are those? I am thinking both the RMP and the audio panel?

Brian is just AMAZING, he makes his own panels. Brian is our first Builder Of The Month (BOM), check out his interview in the BOM area. Very impressive builder.

Matt Olieman

[djcevera20]

brian thank you for posting your script.that is going to help me big time

sorry brian to bother you but i had a quick question...could you just explain the offset $3210 and its funtion i looked in my list of offsets that i printed off and the 3210 offset says. "size =224 use= 56 DWORDS containing zero (when free for use) or a hot key specification as detailed earlier in theis document. See also 32fe below" sorry if this makes no sense maybe my list is old?
Also under the options field in the 7-segment displays you put an N why is that?

[Michael Carter]

Nice work Brian. They look great.

[NigelD]

Hi Brian,
Compliments from me too on your excellent work there! Looks fabulous!

Naturally, I also have a question! Were you able to get the VHF1 and VHF2 selectors to work as it does in the real thing? So you can switch between COMM1 and COMM2 in the display there?

Nigel.

EDIT: and the navigation radio freqs? Less important in a Bus, but I'm curious!

[brianwilliamson]

Yes they now all work and they are usable from either radio. The only difference is that both radios must read the same.
Cheers...............Brian W

[oav163]

Dear all,

First of all brian congratsulations for your great job. I may look a bit idiot but where have you put this script. I use thenIOC modules only and I'm wondering whether I should you some other programs also or I should add your script inside the ini file (iocmodules.ini)

Any help is welcome to a newbie like me.
Spyros

[mmakela]

Hi, You must go to OC website and download iocard.exe program.
Then download and study the corresponding manual of this software.
It is powerful and easy to use but has its limitations.

[oav163]

mmakela thank you

Does this means that I do not need the IOCModules software? I downloaded the iocards but I cannot find the manual and when I run the program it seems that can not find the airbus radio module.

Also the Airbus radio is USB modules is it ok or should I run something else?

Thank you again
Spyros

[mmakela]

Do You have opencockpits plug&play radio module?
If Yes, You should use their beta iocp module software.
You shoud find this iocard.exe program manual in opencockpits
homepage. Keep searching. I help then if no success.
It can be possible to program this radiomodule via iocard program.
then You must find all inputs and outputs of this module with controllador
program.