PDA

View Full Version : Aerosoft MCP



phil744
07-10-2009, 07:25 AM
Hello :)

Ok I am working on an upgrade for the original Aerosoft MCP fo a friend, basically its a 3.4mm thick back illuminated lightplate that's self adhesive and you just stick it on the front of the original MCP fascia connect it to 5V and off you go.

The pics below are of the first prototype, im just working on its PCB then i can light it up for the first time:cool:

Its a shame to only build one of these so if there is any one else who has the same MCP and might be interested let me know.

Will update pics when i get her working

http://i17.photobucket.com/albums/b52/madmini1/DSCF3414.jpg

http://i17.photobucket.com/albums/b52/madmini1/DSCF3415.jpg

http://i17.photobucket.com/albums/b52/madmini1/DSCF3417.jpg

http://i17.photobucket.com/albums/b52/madmini1/DSCF3418.jpg

Jackpilot
07-10-2009, 09:16 AM
Good idea.
Many years ago FDS made for me a thin grey layover for the 737, but it was not backlighted.

http://i24.photobucket.com/albums/c29/jackpilot/MCPBlue.jpg

http://i24.photobucket.com/albums/c29/jackpilot/mcp.jpg


I think it is a great piece of hardware, worked like a charm. Still have it.
Great for a generic sim or a 747/57/67 of course. Can avoid zillion hours building your own.

Maybe if you do it in grey too, it might revive the interest for that great MCP.

phil744
07-10-2009, 09:42 AM
Yeah thats the idea, but mine will be backlighted :) i can do them in any colour.

Jackpilot
07-10-2009, 09:46 AM
Your's look like a million!
the one I had was a simple very thin engraved sheet, nothing to compare with.

I love your idea, should help getting all these good MCP's out of the dust and back to service. Andrew sold quite a few!!
Jack

Geremy Britton
07-10-2009, 11:02 AM
Looks great Phil, You won't do one for the goflight MCP pro will you!?
Will look great once lit up, shame i don't have the Aerosoft MCP hehe.

I know you've been persueing an idea similar to that for a while and looks great now you've got the prototype. :) :) Thanks for the pics too, you have a great camera mayte, or your photography skills are far better than mine LOL Lovelly pics.

Ray Proudfoot
07-10-2009, 12:42 PM
Hi Phil,

I've had my MCP since November 2002 and was disappointed when Andrew called it a day.

I'll wait until you post some shots of it backlit but provisionally, I'm interested. I'm impressed with the quality of the facsia.

Jackpilot
07-10-2009, 03:22 PM
Hi Ray
Andrew still stands behind his product, I had a little glitch 2 years ago and he sent me software and advice to solve it!!
As for Phils panels you can go for it. He made a few for me. Top notch.
Jack

dodiano
07-10-2009, 03:25 PM
Does the Aerosoft MCP works with VISTA?

Regards,

Roberto

Jackpilot
07-10-2009, 03:38 PM
I do not see why it would not.
It worked with 95 98 2000 XP !

Ray Proudfoot
07-10-2009, 04:37 PM
Hi Ray
Andrew still stands behind his product, I had a little glitch 2 years ago and he sent me software and advice to solve it!!
As for Phils panels you can go for it. He made a few for me. Top notch.
Jack

Thanks Jack. It's reassuring to hear that Andrew is still available should a problem occur. Do you have a contact address for him please? Just for reference should it be required.

I'm sure Phil's panels will be fine. An indication of the price would be handy though. ;)

Jackpilot
07-10-2009, 07:00 PM
Do you have a contact address for him please? Just for reference should it be required.


Have to dig, will report.
JP

phil744
07-10-2009, 07:54 PM
Okay,

I still need to figure out the price, im trying to gauge how many i would need to build to get a good idea of that, it works out cheaper and better to pool all the requests and make a small run of several pieces rather than doing one at once, this is a very difficult piece to make and a real challenge, but i love a challenge

Okay, so i have had a go at the back light, not perfect yet but close, its difficult infact impossable to get even light spread when the panel is only 2mm thick and that includes PCB, but Im going to try again using 3mm, should even the light spread better and jiggle the led positions a bit, but not bad for a first attempt :)

Next job is to make the adhesive layer, in the pics below the panel itself is just resting on there, but once it has its adhesive layer installed it will overcome most of the light bleed through around the edges

http://i17.photobucket.com/albums/b52/madmini1/DSCF3422.jpg
http://i17.photobucket.com/albums/b52/madmini1/DSCF3425.jpg
http://i17.photobucket.com/albums/b52/madmini1/DSCF3428.jpg
http://i17.photobucket.com/albums/b52/madmini1/DSCF3430.jpg
http://i17.photobucket.com/albums/b52/madmini1/DSCF3433.jpg

Ray Proudfoot
07-11-2009, 04:42 AM
Hi Phil,

For a first attempt that looks pretty good. Fully understand the cost issue. Hopefully more people will be attracted to it with a finished product.

Have you posted anywhere else? AvSim, SimFlight and FlightSim are three obvious places with plenty of enthusiasts.

phil744
07-11-2009, 08:34 AM
Cheers ray, no I havnt posted this else where but its a good idea might do that.

Ive just noticed where you are, im 1 mile of junction 31a M6 pop down for a brew and a look around if you like;)

Ray Proudfoot
07-11-2009, 08:52 AM
Hi Phil,

I see you're NE of Preston. Not too far. I'm tied up for the next two weekends (visiting Pete Dowson next weekend and family commitment 25/26 July) but should be free 1-2 August. Working full-time restricts me to weekends. Prefer Saturday if that's OK with you.

PM me with details when you're able.

phil744
07-11-2009, 09:06 AM
you have PM;)

dodiano
07-11-2009, 05:46 PM
Damn you Phil... Now I want an Aerosoft MCP...LOL!! Good job Buddy!

Farny
07-12-2009, 08:03 AM
Hi Phil,

Are you planning to develop EFIS and EICAS too?
Count me in....
Regards,

Farny
EBBR

phil744
07-12-2009, 08:34 AM
If I can get my hands on a set then yeah;)

rhysb
07-14-2009, 02:46 PM
That MCP Looks great wish I had one :-)

warvet
07-15-2009, 02:29 AM
Phil your stuff is always amazing as usual, i know if you made its the best!Any chance of getting you to make a whole unit?

Your Mate Tim

ran56
07-15-2009, 03:07 AM
Very well done job Phil, looks amazing.


Fideling myself with backlighting of the old FDS MCP panel.
I used 5mm and 3mm leds. I see that the smt leds doing much better job.

See if you can add another smt led where the light not spreading evenly.
I thing this should do the work for you.

Thanks for sharing,
Ran.

Jake 747 400
08-08-2009, 08:02 PM
Looks fantastic phil, great work.
I know they stopped making the mcp's but is there anywhere you can still get one, maybe second hand.
Thanks, Jake.