pmFBW16 is out! [Archive]

mmakela

02-21-2010, 03:06 AM

Hello, pmFBW16 ready in updates section.
---
My project airbus A320 is working quite ok
now but some minor things needs to be corrected.

mguerreiro

03-02-2010, 07:01 PM

Hi All,

I have been testing this software since it do not need an any license.

I found it perfect, but I have a strange bug.

Pitch goes perfect, but when I command a right roll the plane turns to the left, the left turn works perfect!

This happend with Project Airbus 320 plane on FSX.

Regards,
Manuel

mmakela

03-06-2010, 04:09 PM

Hello Manuel,
there are new updates for FBW, ABGC, FCU and MCDU.
Have You tried those yet. I will tomorrow.
This same problem happened sometimes with manual landing.
I had to quit FBW to land properly. The flyability is overall much
better than before. I use Project AB 320.

mguerreiro

03-10-2010, 07:30 AM

Thank you mmakela,

Yes the problem is with build 16.

Regards,
Manuel

mmakela

03-10-2010, 09:56 AM

Hello Manuel,
please check intermediate update page.
There is a grea. Progress going on with AB systems.
Latest updates are from yesterday 9.3.
Last flight was much better than before.
There are some corrections with ecam messages and
irs alignment issues. Also there is new offset for sliding
doors.

mguerreiro

03-15-2010, 05:33 AM

I try with version 20 and improves a lot.

Also I found the error, was in FSUIPC calibration. Aileron goes from -18360 to 18360, but the real values was between -18364 and 18364, this smail difference gives wrong values to the inputs...

Thank you for your help.

Regards,
Manuel

a340-th

03-15-2010, 11:01 AM

Hi,

Anybody have any idea if this is supposed to run on the FS machine or on one of the WideFs Machines - like the one running FCU or MCDU ? Does not say anything in the (non-existing) documentation....

Appreciate your comments...

mmakela

03-16-2010, 08:15 AM

Hello, I have PmFBW in FCU folder.
Should work. New update is 21 and
FCU 310b 15.3.2010
Yours
Markus

a340-th

03-17-2010, 11:14 AM

Hello, I have PmFBW in FCU folder.
Should work. New update is 21 and
FCU 310b 15.3.2010
Yours
Markus

Hi Markus,

thanks for the information. I will try again to run the PmFBW via the network. My first results were not so good and had moved it to the FsServer.

mmakela

03-18-2010, 11:43 AM

Hi, make sure You have newest FCU update.
17.3.2010

luisgordo

11-20-2010, 11:52 PM

What are your findings with the newest build of the FBW module?