Strange behavior with 4 I/O Cards on one USB-Card

[hercules]

Hi all,

i have 4 mastercards connected to one USB-expansion card. All inputs/ outputs works well. But the mastercard number 4 does not detect the last 20 inputs from mastercard 4 correct.

Its hard to describe, but i will try it.

In the testsoftware (contolladeur) i can see the switches and its changes without problems. But within SIOC i cant get these 20 Inputs working. No matter what funktion and what offset i link to these inputs, they doesn't work. The ipconsole shows no reaction as well.

The programing should not be the problem, because i take a working offset (thats work well on another input) and just link it to one of the 20 Inputs. From now it doesn't work.

I already changed the mastercard, expansioncard without any succsess.

I use SIOC 3.4.

Any ideas where i can search? is there a known bug within sioc?

Regards

Thomas

[hercules]

has nobody an idea?

Regards

Thomas

[fordgt40]

Thomas

I assume that Controlador is showing the correct input switch numbers for mastercard no 4 ie in the range 216 - 287? If so, have you tried using SIOC 3.7 to see if it makes any difference? Sorry, but that is all I can think of

David

[verticallimit]

Rember in the "C:\Programmer\IOCards" to change the file called iocard :

[ Numero de tarjetas Master inter-conectadas ]
[ Number of connected master cards ]
NCards=1

Try to change it to 4