CTS288 encoders on OC IOCards?

[HondaCop]

Hello guys,

I am building my EFIS set and I have everything already programmed via SIOC and working, EXCEPT the encoders for the MINS and BARO settings.

I have an Opencockpit USB expansion card with 2 mastercards connected to it. One of the mastercards has an input connector with the encoder card attached to it.

I just have no idea on how do I wire the encoders to the inputs on the mastercard. On the Opencockpits site it says that if you have CTS288 encoders, you don't even need to use an encoder card and can simply connect the encoders directly to the inputs on the mastercard (it will use 2 inputs per encoder). I am going this route because one less thing to worry about (encoder card), but I have no idea how I would program the encoder via SIOC.

Can anyone help me out a bit? I'm a quick learner. ;-)

BTW, I didn't even bother to ask on the OC site because I will have to wait weeks for the first reply.

[Perik]

Hello HondaCop

Concerning OC & SIOC always remember Niko Kaan:

http://www.lekseecon.nl/iocards.html#encoder

As well as this one:
http://personales.ya.com/micabina737/iocards/hard/elementosi.htm#cts

[ran56]

Hi,
The encoder has 3 pins.
2 goes to inputs in the MC and the gnd to the common gnd
of the same group where you connected the 2 inputs from the encoder.
The inputs should be consecutive
The MC can handel encoders, I have 2 MC and bunch of CTS288 and all work well.
Nico site is very informative as well :)

Good luck,

[frazer]

Sorry for "stealing" the thread here, but is there any encoder available that works with the master card that doesn't have a button included? It's for use in an MCP.

[ran56]

Don't remember the part no. but the CTS has one with push and one without push
Like this one
http://www.flightdecksolutions.com/prod_info.php?id=71

[frazer]

It seems like CTS encoders are very hard to get hold of in Sweden, no reseller in sight. Will an encoder from another manufacturer, with the same specifications, work you think?