737 homemade MIP

[super2277]

hi i am 14 years old and plan Wed building home-made cockpit and I simply thoughtfully 737ng I got hold of the drawing But it's one thing I did not under stand Completely! see link here
http://users.skynet.be/jcordon/cockpit/plans.htm
the MIP panel where you will sharpen the screen and stuff, when to use
POST Riza did not get it scala completely in the right size!, There is talk about a few mm but I wonder if I can get some help and the scala?
The makeover of MIP particleboard

alså i dont get in in aksakelig sizzer

use translate google end i sey it on norwegian

hei jeg har planer om en 737ng hjemmecockpit men problemet er at jeg får ikke scalat den i riktig størrelse

[oal331]

For ANY measurements you want, check here http://www.markuspilot.com/page42.html

Good luck !!

Eddie

[super2277]

tanks but i dont understand what he mean, i have scala with POSTERIZA size is width 8 peges
and height 3 pages
is dhatn work?

[autocadplease]

Download my 1:1 pdf file http://www.mycockpit.org/forums/downloads.php?do=file&id=188
Select the area you want using the "snapshot" tool. Right click and select print. Make sure you select "none" in the page scaling. This will print out at scale then.

[Westozy]

Anyone have any 1:1 scale cocpkpit measurements drawings of the Avro RJ family? would relly need something like that:p

Hi Timmi, I suggest you put this post in your own thread with a title of "Avro RJ sizes" and you will have a lot more people see it!

Cheers Gwyn

[super2277]

Download my 1:1 pdf file http://www.mycockpit.org/forums/downloads.php?do=file&id=188
Select the area you want using the "snapshot" tool. Right click and select print. Make sure you select "none" in the page scaling. This will print out at scale then.

you mean scala to 110%?

[autocadplease]

No. Scale should be 100%.
110% would make it 10% larger than the original.

[super2277]

No. Scale should be 100%.
110% would make it 10% larger than the original.

scala 100% ?

[super2277]

but scala it 100% in print settings but thats is on pieas
one A4

[super2277]

No. Scale should be 100%.
110% would make it 10% larger than the original.
i using

Autodesk design

[autocadplease]

If you have Autodesk design, then download the dwg file http://www.mycockpit.org/forums/downloads.php?do=file&id=187
The drawing is to scale so then you should be able to do whatever you want.

[autocadplease]

but scala it 100% in print settings but thats is on pieas
one A4

If you try to print the entire MIP on A4 paper then you will have a lot of pages to print out - no way around that. If you have access to a large format printer that is the way to go.

[super2277]

But i dont have autocad

[autocadplease]

You said you have Autodesk Design. You can open / import DWG files with it http://usa.autodesk.com/adsk/servlet/pc/index?siteID=123112&id=8411823

Maybe explain again what you are trying to accomplish. Maybe I have lost something in your translations.

I am happy to help, even if I need to convert things for you.

[autocadplease]

Super2277,

I created some pdf files for you. What I did was tiled the MIP, MCP, Overhead and the Pedestal into separate files using A4 size paper. All you will have to do is print them off at 100% scale on A4 paper and paste/tape them together. The pages have a .25 inch overlap and have marks to help line them up. Then after you do that, cut the outline out and trace it onto your wood for cutting. Hope this is what you are after.
Either PM or post me you email address.

Note to anyone else: If these are of interest to anyone else I can upload them. Just reply or PM me.

[super2277]

Download my 1:1 pdf file http://www.mycockpit.org/forums/downloads.php?do=file&id=188
Select the area you want using the "snapshot" tool. Right click and select print. Make sure you select "none" in the page scaling. This will print out at scale then.

Is this 155 cm or 150cm?

[super2277]

I forgot to say i have get aces to a big printer for printing drawnings

[autocadplease]

Just print it out at 100% scale (no scaling) and it will print to the exact scale.
If you want to know the exact size (length x width) of the file, just look in the properties. I forget the exact measurements.

[super2277]

Just print it out at 100% scale (no scaling) and it will print to the exact scale.
If you want to know the exact size (length x width) of the file, just look in the properties. I forget the exact measurements.

in the PDF i have download? how versjon i use pdf 2011?

[autocadplease]

In Adobe Acrobat or Adobe Reader, under the "File" menu select "Properties" to see the file's attributes/size.
The page size of the file I uploaded in 92" x 120". Not many wide media printers can print a page that large, so you will need to use the snapshot tool. If you don't have it already, download Adobe Acrobat Reader (free download at http://get.adobe.com/reader/).

[super2277]

In Adobe Acrobat or Adobe Reader, under the "File" menu select "Properties" to see the file's attributes/size.
The page size of the file I uploaded in 92" x 120". Not many wide media printers can print a page that large, so you will need to use the snapshot tool. If you don't have it already, download Adobe Acrobat Reader (free download at http://get.adobe.com/reader/).

it is 2 336,8 x 3 048,0 mm

[autocadplease]

it is 2 336,8 x 3 048,0 mm

Yes, it is.

[super2277]

Yes, it is.

Ok i try to print out frist with A4? and see how dimensjon is, i hope its a good working dimensjon tahts i can start building agen

BUT THANKS SO MUCK FOR HELPING HERE :)

[Haildoc82]

Hello @super2277,

nice work!

greats Patrick
www.737ng.info

[super2277]

thx :) its going good but the drawnings of the mip is so badly wrong size :(

[super2277]

Se here i use "none" in sife scaling and get this?

http://i851.photobucket.com/albums/ab79/super2277/dasdsadas.png

[super2277]

Anywone some can help?

[737dragon]

Anywone some can help?

here have all, at 1:1 in pdf

http://www.opencockpits.com/modules.php?name=Downloads&d_op=viewdownload&cid=55

[super2277]

thx i heave try it at it is 3 cm to small :(


sorry i am not good in english

[super2277]

maby i heave to tro printing out with scala 101% i heave 100% scala and 3 cm to small

[Efe Cem Elci]

So you printed it out and it comes out 3 cm too small and you suggest printing it at 101% just to make it to scale?

[drum4no1]

I wouldnt lose any sleep over 3 cm.

[super2277]

So you printed it out and it comes out 3 cm too small and you suggest printing it at 101% just to make it to scale?
Yes make it real as posible

[super2277]

i heave print out but the screen is 18 and 17 and 16cm:( if you can try? to get a 18cm 18cm height and the another thing? (sorry) in the screen, if you see on markuspilot

[super2277]

i heave print out but the screen is 18 and 17 and 16cm:( if you can try? to get a 18cm 18cm height and the another thing? (sorry) in the screen, if you see on markuspilot

i slowed it but what can i do next? i need serius help??? whear can i begin next ting with the MIP panel?
http://i851.photobucket.com/albums/ab79/super2277/DSC00076-1.jpg

http://i851.photobucket.com/albums/ab79/super2277/DSC00078.jpg

http://i851.photobucket.com/albums/ab79/super2277/DSC00085.jpg

http://i851.photobucket.com/albums/ab79/super2277/DSC00084.jpg

[abhay9]

Hi,

That looks good, can you tell which file did you use and how did you get the print of the MIP.

Regards
Abhay

[abhay9]

Super2277,

I created some pdf files for you. What I did was tiled the MIP, MCP, Overhead and the Pedestal into separate files using A4 size paper. All you will have to do is print them off at 100% scale on A4 paper and paste/tape them together. The pages have a .25 inch overlap and have marks to help line them up. Then after you do that, cut the outline out and trace it onto your wood for cutting. Hope this is what you are after.
Either PM or post me you email address.

Note to anyone else: If these are of interest to anyone else I can upload them. Just reply or PM me.




Hi Autocadplease,

I would like to have those files for my build, please check your PM for my mail id.

Thanks a lot for all your help and contribution.

Regards
Abhay

[super2277]

Sorry for the late respons the was a little stop in building but i will begin today :)

[abhay9]

Sorry for the late respons the was a little stop in building but i will begin today :)


Hi Super 2277,

Can you please tell which file did you use and how did you get the print of the MIP.


Regards
Abhay

[super2277]

Hi Super 2277,

Can you please tell which file did you use and how did you get the print of the MIP.


Regards
Abhay

The file is in this thread

[abhay9]

hmmm,

There in one PDF and Autocad of AUTOCADPLEASE, which one did you use, and how did you print them (Scaling).

Regards
Abhay

[super2277]

i printed out in PDF i not remember the size but i think it was 105% scala

[abhay9]

hmm,

sorry to bother when ever possible can you make a elaborate tutorial the way you did all the stuff with file.


Regards
Abhay

[super2277]

Here is update
http://www.diskusjon.no/index.php?showtopic=1271670&st=40&gopid=17632754&#entry17632754

translate it from norwegian to english :P

[walken]

Sorry to be posting on a 4 year old post however I am looking for a pdf file etc. that I can print out a scale size 737 mip that I could glue on to base to work off of. (file could print out standard size 11 by 7 sheets when put together would be scale 737 mip) What my ultimate goal is to build a captains side panel (jetmax style) with my 19 inch monitor for instruments behind mip and 40 inch monitor for visuals adding a real autopilot at some point. Thanks in advance for any help suggestions.

[ramoko]

hello Super2277, I would be very happy to receive the pdf for A4 size paper.
thanks a lot
Kind regards
Ramo Koller