Leo's had to put his price up....

[No Longer Active]

Looks like the original BU0836 non x version has gone up by £3. It used to be £16.99 and is now £19.99.....

It must be that Leo's supplier has put their price up too....

I thought I would just mention this....

Alex

[ian@737ng.co.uk]

hi alex........
well, the BU0836 has been at that price level since i was a boy (and that's a very looooooooong time). so we really can't complain.
leo's a very genuine guy and he would only raise the price if he had to. and for what it does, it's still great value.
where would we be without these cards :o
regards and merry christmas

ian

[No Longer Active]

I agree with you Ian.

I sure do have a few of these cards now, and always needing more...

I am not complaining at all, I just noticed they were £16.99 each the last time I looked.

A few quid to Leo is a few quid well earnt I say....

Happy Christmas to you too Ian....

Alex

[AK Mongo]

OK Alex,

Can you translate some English into American for me? How much is a quid?

Reid

[ian@737ng.co.uk]

Can you translate some English into American for me? How much is a quid?

Reid

a quid = $1.55c :o

have a great christmas Reid

rgds

ian

[Matt Olieman]

a quid = $1.55c :o

have a great christmas Reid

rgds

ian

So is a quid a British pound?

Matt Olieman

[Meridian]

Matt

Yes, that's exactly what it is.

Andrew

[notgotaclue]

So is a quid a British pound?

Matt Olieman

Also a fag is a cigarette.
I learnt the hard way trying to buy 20 fags in New York. ;)

[Geremy Britton]

So is a quid a British pound?

Matt Olieman

similarly the same way a buck = 1 Dollar. :)

[fordgt40]

And at the risk of thread drift

Bonnet = hood
Boot = trunk
Pavement = sidewalk
petrol = gas

ete etc- As Alaister Cook said "two nations separated by a common language"

David

[No Longer Active]

lol, this post could go on and on.......

trash can / garbage can = rubbish bin (uk)
pants = trousers (uk)
jelly = jam (uk)
jello = jelly (uk)
mall = shopping centre (uk)
cookies = biscuits (uk)
principle = headmaster (uk)
movies = films (uk)
elevator = lift (uk)
fries = chips (uk)
potato chips = crisps (uk)
vocation = hoiliday (uk)
fall = autumn (uk)
subway = underground (uk)
store = shop (uk)
diaper = nappy (uk)
soccer = football (uk)
yard = garden (uk)
stroller = pram (uk)
doctors office = surgery (uk)
sneakers = trainers (uk)
cottoncandy = candyfloss (uk)

a squid / a nicker = £1
a monkey = £500
a bull / bullseye = £50
a score = £20

This could go on forever......lol

[notgotaclue]

Dont forget my personal favourite.......
Fanny Pack. :razz:


How did we get from the price of hardware to discussing ladies front bits?

[No Longer Active]

How did we get from the price of hardware to discussing ladies front bits?

Its probably because ive got something to do with it lol....

[Tom_G_2010]

One of my favorites that I learned when my company had some sales reps from the UK join us for a meeting in the US was "Dodgy" translation per their explanation is suspicious or questionable.

Anyway to pull this thread back closer to the starting point, I haven't noticed any significant uptick in Leo's prices.

And now for a slight thread swerve: But, the "Out of Stock" situation on several items is a little frustrating. In some cases the items are common and can be sources elsewhere. Others though, like those 3 pin connectors for his two older boards are hard to find. I've tried two different alternate connectors and neither worked.

I've e-mailed him a couple times to ask for an update on when they'd be back in stock but did not receive a reply to those messages. Also asked if he could provide the spec so I could source them elsewhere while he's out. No reply there either. I really like his boards but like many small or home based businesses they are challenged by communications overload.

Hoping those connectors are back in inventory soon since the alternate connectors I found require quite a bit of modification to fit and I don't trust them enough to mount the board up under the MIP. Really looking to order them from him or find the correct ones elsewhere. By next month I'll be at a point where that is holding up the build.

[No Longer Active]

3 pin connectors for his two older boards are hard to find

They are the EASIEST connectors to find. All they are are servo extensions, ebay is smothered with them. I bought 5 for 99p and that included delivery....

http://www.ebay.co.uk/itm/260873012546?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1497.l2649#ht_2382wt_1059

[Tom_G_2010]

They are the EASIEST connectors to find. All they are are servo extensions, ebay is smothered with them. I bought 5 for 99p and that included delivery....

http://www.ebay.co.uk/itm/260873012546?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1497.l2649#ht_2382wt_1059

Strange. I bought a set of 3 pin RC servo connectors from a local hobby shop and the shell is too deep. The pin/socket size is correct. The pin spacing 0.1" (2.54mm) is correct. But the shell extends forward of the pins just far enough that they don't seat tightly onto the board.

I asked at the hobby shop and was told there was really only one standard connector but maybe that's not true.

I don't have an assembled pic handy but here's the pic from the store where I got them:

5984

They are described as:


EMS Unassembled Radio System Connectors (3-pin Servo Connectors). Compatible with Hitec, Airtronics Z and JR systems

I may try trimming the nose off the plastic shell so the socket sits further down on the board. But, short of that modification they don't work.

[No Longer Active]

But the shell extends forward of the pins just far enough that they don't seat tightly onto the board.

Cant you just cut a fraction of the end off (ie a 1/4) ?

[Tom_G_2010]

Cant you just cut a fraction of the end off (ie a 1/4) ?

That's what I was referring to below. The holidays have limited my build time, but hopefully next week I'll be getting back on track and thats one of the items on my to do list.

[Ghost_rider]

I may be able to help with the 3 pin connectors, I bought 2000 of the plastic part and the matching number of inserts to crimp to your own wires if need be.

[Tom_G_2010]

I may be able to help with the 3 pin connectors, I bought 2000 of the plastic part and the matching number of inserts to crimp to your own wires if need be.

THANKS!

I'll see if I'm successful cutting down the ones I have. IF not, I may take you up on the offer.