Neil Hewitt
02-12-2012, 06:52 PM
I've been replying to a few threads recently giving advice on a good spec for a new FSX box, so I figured I might as well briefly talk about mine :-)
I've had the parts for a while now, but only just got it working. My first attempt failed dismally after the second or third boot and after much searching I discovered a pin in the CPU socket (LGA 1155) had snapped off. LGA sockets are the bane of my existence. So, new motherboard time; and then I got busy at work so no time to build. Until this weekend.
Now, this is going to be the main PC in my cockpit setup and I want to do something slightly unusual with it - I'm going to rack-mount it. More specifically, I'm going to build a rack myself for optimal cooling and cable management. I had already experimented with rack-mounting PC boards in my previous sim build, so I took it from there. Cut a large enough piece of 6mm MDF board to accomodate the motherboard, PSU, cooler duct (I'm using a Corsair H80 hybrid water cooler which that has a separate cooling radiator that has to go somewhere), and SSD. Mark the mounting holes for the motherboard, drill holes out, insert some stand-offs, and you can then mount the board directly. The PSU goes up against a support board and is attached with velcro tape; the Corsair H80 radiator assembly is positioned against the CPU intake fan so you get one single airflow through both, and similarly taped in place. The SSD is just velcro'd to the board in the same fashion. Finally, the graphics card is meaty enough and heavy enough that it just sits in place very stably without the need for any kind of overhead rail to attach it to.
Couple of (bad quality camera phone, sorry) pics:
624362446245
When I got the rig up and running, I was pretty happy. It took an overclock to 4.7GHz with only a 3 MHz FSB increase, and the RAM is performing like a champ. Once I was happy it was stable and the drivers up to date, I fired up FSX and just maxed more or less everything and took it for a quick spin around San Fransisco Bay. This is stock FSX, no add-ons installed at this point, zero tweaking done. Right in the middle of downtown SF I was getting high twenties to late thirties in terms of framerate, very very smooth, even with the graphics card overriding the settings up to insane levels.
I have to say, I'm impressed. If it's this good out of the box, imagine how it'll be after some extensive tweaking :-)
For the record, the specs are:
Asus P8Z68-V/Gen3 - this is a really good board for overclocking. Just don't install the AI Suite, cos it breaks Windows.
Intel Core i7 2600K (3.4GHz stock, clocked to 4.7GHz stable)
Corsair H80 closed-loop hybrid water cooler
Corsair Vengeance DDR3-1600 RAM (4GB x 2)
OCZ Vertex 3 SSD 120GB - this is a proper 6GB/s job, and the motherboard fully supports it. Fast!
Corsair GS800 PSU - slight overkill for this job, but it's a very solid PSU and I trust Corsair kit.
AMD ATI Radeon HD 6970 - it's last-gen now, but really only just. A very quick card indeed. Eyefinity support, of course.
Not the cheapest rig I ever put together - especially considering there's no case, no optical drive etc - as I reckon it must have cost me around £800 (not counting the broken motherboard). But well worth it to finally max out the sliders and not see a single stutter or crawl into land at 5fps.
I've had the parts for a while now, but only just got it working. My first attempt failed dismally after the second or third boot and after much searching I discovered a pin in the CPU socket (LGA 1155) had snapped off. LGA sockets are the bane of my existence. So, new motherboard time; and then I got busy at work so no time to build. Until this weekend.
Now, this is going to be the main PC in my cockpit setup and I want to do something slightly unusual with it - I'm going to rack-mount it. More specifically, I'm going to build a rack myself for optimal cooling and cable management. I had already experimented with rack-mounting PC boards in my previous sim build, so I took it from there. Cut a large enough piece of 6mm MDF board to accomodate the motherboard, PSU, cooler duct (I'm using a Corsair H80 hybrid water cooler which that has a separate cooling radiator that has to go somewhere), and SSD. Mark the mounting holes for the motherboard, drill holes out, insert some stand-offs, and you can then mount the board directly. The PSU goes up against a support board and is attached with velcro tape; the Corsair H80 radiator assembly is positioned against the CPU intake fan so you get one single airflow through both, and similarly taped in place. The SSD is just velcro'd to the board in the same fashion. Finally, the graphics card is meaty enough and heavy enough that it just sits in place very stably without the need for any kind of overhead rail to attach it to.
Couple of (bad quality camera phone, sorry) pics:
624362446245
When I got the rig up and running, I was pretty happy. It took an overclock to 4.7GHz with only a 3 MHz FSB increase, and the RAM is performing like a champ. Once I was happy it was stable and the drivers up to date, I fired up FSX and just maxed more or less everything and took it for a quick spin around San Fransisco Bay. This is stock FSX, no add-ons installed at this point, zero tweaking done. Right in the middle of downtown SF I was getting high twenties to late thirties in terms of framerate, very very smooth, even with the graphics card overriding the settings up to insane levels.
I have to say, I'm impressed. If it's this good out of the box, imagine how it'll be after some extensive tweaking :-)
For the record, the specs are:
Asus P8Z68-V/Gen3 - this is a really good board for overclocking. Just don't install the AI Suite, cos it breaks Windows.
Intel Core i7 2600K (3.4GHz stock, clocked to 4.7GHz stable)
Corsair H80 closed-loop hybrid water cooler
Corsair Vengeance DDR3-1600 RAM (4GB x 2)
OCZ Vertex 3 SSD 120GB - this is a proper 6GB/s job, and the motherboard fully supports it. Fast!
Corsair GS800 PSU - slight overkill for this job, but it's a very solid PSU and I trust Corsair kit.
AMD ATI Radeon HD 6970 - it's last-gen now, but really only just. A very quick card indeed. Eyefinity support, of course.
Not the cheapest rig I ever put together - especially considering there's no case, no optical drive etc - as I reckon it must have cost me around £800 (not counting the broken motherboard). But well worth it to finally max out the sliders and not see a single stutter or crawl into land at 5fps.