serious help needed Opencockpits ATC radio and Project Magenta

[flyguyB737]

Hi all I am new at SIOC after 2 days I just can't get my head around things.

First my XPNDR Fail light wont work I tried to fix it got it working with my fingernail thought must be a dry joint nope not working at all now never mind not that important.

But here's what I need:

I am trying to get the TA/RA switch to work with PM software and activate the Data OFF when in Standby Altitude Data When on XPNDR All Aircraft When on TA Only and Callsigns when in TA/RA.

Now I can activate these from my PM CDU but can't understand why not from radio.

Also My Ident button will not work in Squawkbox.

Ok so here's what I tried thus far.

Downloaded SIOC4.01, IOCModules, Autoconfig1.4 etc.

Now if I run Autoconfig1.4 select PM all it will do is turn the altitude data on but not off. So I need an answer for this or script or major help!!!!

I have tried some other scripts I found one that makes the encoders handle both sets of numbers which i really like but wont help me with PM

Also if I try autoconfig1.4 FSX+FSUIPC there is no response in FSUIPC to the unit when i push a button?

Ok people I need your help as my mind is going nuts thanks

Colin

[flyguyB737]

Never mind I got it working the way I want and in case anyone wants the code here it is

// * FileName : projectm.txt
// * Date : 10/05/2012



Var 0000, Value 0
{
&D_ACTIVE = 1200
&DIG_POS_STATUS = 1
&DIS_ATC = 1
&DIS_1 = 1
&DIS_2 = 0
}

Var 0001, name FS_XPDER_ID, Link FSUIPC_INOUT, Offset $0354, Length 2

Var 0002, name IVAP_SB_MODE, Link FSUIPC_INOUT, Offset $7B91, Length 1

Var 0003, name IVAP_SB_IDENT, Link FSUIPC_INOUT, Offset $7B93, Length 1

Var 0004, name XPDER_FAIL, Link FSUIPC_INOUT, Offset $0B6F, Length 1
{
IF &XPDER_FAIL = 1
{
&D_FAIL = -999997
&LED_FAIL = 1
}
ELSE
{
&D_FAIL = -999999
&LED_FAIL = 0
}
}

Var 0005, name TCAS_MAGENTA, Link FSUIPC_INOUT, Offset $04F4, Length 2

Var 0006, name DIG_POS_STATUS

Var 0007, name DIG_1_SUB, Value 0
{
CALL &DIGITS_SUB
}

Var 0008, name DIG_2_SUB, Value 0
{
CALL &DIGITS_SUB
}

Var 0009, name DIG_3_SUB, Value 2
{
CALL &DIGITS_SUB
}

Var 0010, name DIG_4_SUB, Value 1
{
CALL &DIGITS_SUB
}

Var 0011, name D_ACTIVE, Link IOCARD_DISPLAY, Device 16, Digit 0, Numbers 4

Var 0012, name D_FAIL, Link IOCARD_DISPLAY, Device 16, Digit 4, Numbers 1

Var 0013, name D_BRIGHT, Link IOCARD_DISPLAY, Device 16, Digit 16, Numbers 3

Var 0014, name DIS_ATC, Link IOCARD_OUT, Device 16, Output 20

Var 0015, name DIS_1, Link IOCARD_OUT, Device 16, Output 21

Var 0016, name DIS_2, Link IOCARD_OUT, Device 16, Output 22

Var 0017, name LED_FAIL, Link IOCARD_OUT, Device 16, Output 23

Var 0018, name E_LEFT, Link IOCARD_ENCODER, Device 16, Input 5, Aceleration 1, Type 2
{
L0 = &E_LEFT * 1
&DIG_POS_STATUS = ROTATE 1 ,4 ,L0
}

Var 0019, name E_RIGHT, Link IOCARD_ENCODER, Device 16, Input 10, Aceleration 1, Type 2
{
IF &DIG_POS_STATUS = 1
{
L0 = &E_RIGHT * -1
&DIG_1_SUB = ROTATE 0 ,7 ,L0
}
IF &DIG_POS_STATUS = 2
{
L0 = &E_RIGHT * -1
&DIG_2_SUB = ROTATE 0 ,7 ,L0
}
IF &DIG_POS_STATUS = 3
{
L0 = &E_RIGHT * -1
&DIG_3_SUB = ROTATE 0 ,7 ,L0
}
IF &DIG_POS_STATUS = 4
{
L0 = &E_RIGHT * -1
&DIG_4_SUB = ROTATE 0 ,7 ,L0
}
}

Var 0020, name I_IDENT, Link IOCARD_SW, Device 16, Input 12
{
IF &I_IDENT = 1
{
&IVAP_SB_IDENT = 1
}
}

Var 0021, name I_XPNDR, Link IOCARD_SW, Device 16, Input 7
{
IF &I_XPNDR = 1
{
&DIS_1 = 0
&DIS_2 = 1
}
ELSE
{
&DIS_1 = 1
&DIS_2 = 0
}
}

Var 0022, name STANDBY, Link IOCARD_SW, Device 16, Input 0
{
IF &STANDBY = 1
{
&IVAP_SB_MODE = 1
&TCAS_MAGENTA = 50
}
}

Var 0023, name I_R_ALT, Link IOCARD_SW, Device 16, Input 1

Var 0024, name I_R_XPN, Link IOCARD_SW, Device 16, Input 2
{
IF &I_R_XPN = 1
{
&IVAP_SB_MODE = 0
&TCAS_MAGENTA = 51
}
}

Var 0025, name I_R_TAO, Link IOCARD_SW, Device 16, Input 3
{
IF &I_R_TAO = 1
{
&TCAS_MAGENTA = 53
}
}

Var 0026, name I_R_TAR, Link IOCARD_SW, Device 16, Input 4
{
IF &I_R_TAR = 1
{
&TCAS_MAGENTA = 52
}
}

Var 0027, name DIGITS_SUB, Link SUBRUTINE
{
L0 = &DIG_4_SUB * 1000
L1 = &DIG_3_SUB * 100
L0 = L0 + L1
L1 = &DIG_2_SUB * 10
L0 = L0 + L1
L0 = L0 + &DIG_1_SUB
&D_ACTIVE = L0
&FS_XPDER_ID = TOBCD &D_ACTIVE
}

colin