jagged runway edges (fsx)

[Infinity]

I am projecting jagged runway edges with an xga dlp projector (vga). My HDTV (1080P) was also jagged, but I was able to smooth it out in the resolution adjustments. It looks great now.

What settings do I need to smooth out the runway edges with the projector. Surely you guys aren't flying around with Super Mario Bros graphics.

Anti-Aliasing on or off didn't seem to matter, just the filter turned on.

[Infinity]

Update!

I entered the highest resolution for the projector (acer x1230). It made a slight difference. Also noticed turning AA on also helped very slightly. Runway edges slightly jagged still. Any other ideas? Or is the projector the weakest link?

[nax228]

try changing the display device setting in FSX/settings. In the pic below show "Nvidia GeForce 8800 GTX.0". Try changing to "Nvidia GeForce 8800 GTX.1".
...regardless of witch card you have, you change the value to the other device

http://www.simforums.com/forums/uploads/20080520_111320_FSX_settings_1.jpg

[NedHamilton]

I've wondered what that entry does. I always have two (sometimes 3) devices showing up on that FSX display settings window even with only one video card. When I change the setting in FSX it doesn't make any difference!

[nax228]

It did the trick for me when having similar problem.

[Infinity]

try changing the display device setting in FSX/settings. In the pic below show "Nvidia GeForce 8800 GTX.0". Try changing to "Nvidia GeForce 8800 GTX.1".
...regardless of witch card you have, you change the value to the other device



I appreciate the advise and tried it. Unfortunately for some reason, I don't have another value to change to. When I click on the card, the "different" card in the drop down menu is a direct copy of the original. It still has a "0" value. I'm using a GTX 550ti. Perhaps I'm missing something.