3d models for 737NG knobs

[pshz11]

Is there any available? :cool:

[pshz11]

Finally I've done 3D model of "type 1" (based on OC knobs I have) and can share, if someone needs (consists of 2 parts for 3d printing).
Probably, someone have at least dimensions for other knobs (on radio modules, MCP and EFIS especially)?

7759

[m0ng00se]

hi pshz11 ..

know this thread is old, but care to share the 3d file for this knob ?

thanks in advance

[paulnd]

hi pshz11 ..

know this thread is old, but care to share the 3d file for this knob ?

thanks in advance

yes please

[skino]

Please....

[m0ng00se]

hi pshz11 ..

know this thread is old, but care to share the 3d file for this knob ?

thanks in advance

Hi guys, took me bloody ages with my limited knowledge of AutoCad, but designed my own. Printed very well on my 3D printer. Dimensions could be slightly off, but it's good enough for me. Got a 6.8mm diameter hole at the bottom and 2 holes for M3 grub screws.

9486

Feel free to share,can be downloaded here:

.dxf - https://drive.google.com/file/d/0B4bnuz4z6lbFS3JwSXJCTnphTFk/edit?usp=sharing
.dwg - https://drive.google.com/file/d/0B4bnuz4z6lbFNG5UTzZHcG1DclE/edit?usp=sharing
.stl - https://drive.google.com/file/d/0B4bnuz4z6lbFU1RSc3I4U3pZTXM/edit?usp=sharing

Anyone designed any other knobs, especially EFIS, please let me know.