Looking for High Quality 737 Collins MCP Drawings or Model

[KB1RCC]

Hi All,

I am trying to laser print an Collins MCP for my cockpit. I have been searching the internet for a good model I can base a 3D model off of.

I have started my Overhead and this is what it looks like so far. I will post the sketchup model once it is finished.

9327

Thanks,

Jeff

[Henju]

Hello,
If you are still looking for drawings, I can give you my 737CL SKP files which includes some of the Sperry SP-300 MCP, not sure if it is of the same style but you can decide.

Henri

[KB1RCC]

That would be a great help!

Here is my email scannorfolk@gmail.com

[m0ng00se]

Jeff ..

What I sometimes do is find a photo of the real deal. I know what the dimensions should be, 470mm wide give or take if I am not mistaken. Then I import it into Autocad with the correct scale and trace it. Afterwards you end up with a nice Autocad drawing for an MCP :)

[KB1RCC]

I had actually considered doing this a couple of weeks ago. I actually found some good drawings of everything so I should be all set.

Thanks!

[fanis]

Hi All,

I am trying to laser print an Collins MCP for my cockpit. I have been searching the internet for a good model I can base a 3D model off of.

I have started my Overhead and this is what it looks like so far. I will post the sketchup model once it is finished.

9327

Thanks,

Jeff

Could you shear whith me your drawing?

[Henju]

Could you shear whith me your drawing?
Hi,
I have some updated drawings of the MCP in vector format, but it's only the Sperry 300 model, which was commonly fitted to the Classics, maybe you could modify them to suit?

Anyways, here is my Google Drive link,
https://drive.google.com/open?id=0ByNTmu6mHPl1S0R3YlU5ek5yY3c

Henri

[Henju]

I Also forgot to add I had made a relatively to scale overhead panel as well, let me know if you're interested
http://www.mycockpit.org/forums/attachment.php?attachmentid=11480&stc=1

Henri

[fanis]

I Also forgot to add I had made a relatively to scale overhead panel as well, let me know if you're interested
http://www.mycockpit.org/forums/attachment.php?attachmentid=11480&stc=1

Henri
Yes i am interested....is very good project...thank you very much .

[fanis]

Henri do you have something else like pedestal?

[Henju]

Henri do you have something else like pedestal?
Sorry, unfortunately not, only the classic MIP from the -200's. May I ask which 737 you're building? Most of the info I have sourced and created comes from the Classic, specifically the Non-EFIS version.

Anyhow, here is the link to the Overhead, be cautioned it slows down the PC when viewing it due to all the vector lines.



Henri

[fanis]

i would like to make 737 ng and the classic is not bad...

[jan789]

Hi All,

I am trying to laser print an Collins MCP for my cockpit. I have been searching the internet for a good model I can base a 3D model off of.

I have started my Overhead and this is what it looks like so far. I will post the sketchup model once it is finished.

Thanks,

Jeff

Hello sir, did you find somwhere drawings of Collins MCP? Thank you in advance.

[paulnd]

free drawings in dxf and Corel formats are available here

http://opensourcecockpit.eu/product/737-mcp-panel-collins/

[jan789]

Thank you so much, very useful page :)