A320 FMGS B35

[navigator88]

Thanks Fil for the good news . I will try to update the software later today.
Ben. By the way if you have some skalarki modules, I'd like to ask you a few questions.
bye

[filippoporcari]

navigator i have a dual seat cockpit with ALL and ONLY skalarki modules
cheers
fil

[navigator88]

hi Fil, Can I get in touch with you via PM or skype. I bought from skalarki fcu wings mip and MCDU and I'd like to ask you a few questions about other modules and the sim.
Thanks Ben

[filippoporcari]

u can pm anytime...and since we're from the same country we could perhaps get in touch by phone :)
cheers
fil

[navigator88]

Ok then, how can I send you a PM ? or should I leave my email?
cheers
Ben

[filippoporcari]

just click on my nickname in any post and choose private message from the menu
fil

[SSO]

Took latest update for a flight today. EKCH-EGKK.
Worked very well.
A few disconnects on 8004, but reconnected immediately.
Good responsiveness.

A GREAT flight!!! Now with taxi lights. :-)

[RigoA320]

Hi
Also had the problem with I / O error 32 on client PC after the update.
Tomasz FS cockpit had helped me.
And my display from the MCDU showed in some settings display problem.
so he had installed me a new updat of the module MCDU, who was too old.
and JH had completely re-install no update, only after a new installation Updat was made​​, then it worked.
Have been very many companies know, but the service of FC cockpit eu is unique.
he takes time for his customers. very very good.

regard Rigo

[jeehell]

Hello


For those having hardware Connect crashes with Skalarki or FSCockpit hardware:
It seems there is a port conflict between their DLL interface and WideFMGS on port 8007.
I suggest you all try to change the port5 to 8002 (instead of 8007) on all your computer.
You can do that either during installation, or running the "configure.exe" file found in the FMGS root folder on each of your computer.

Regards,
JL

[stefangr]

Hello
For those having hardware Connect crashes with Skalarki or FSCockpit hardware:
It seems there is a port conflict between their DLL interface and WideFMGS on port 8007.
I suggest you all try to change the port5 to 8002 (instead of 8007) on all your computer.
You can do that either during installation, or running the "configure.exe" file found in the FMGS root folder on each of your computer.
Regards,
JL

Great news, I will try that!

Thanks
Stefan

[filippoporcari]

jl do u suggest to change port 5 anyway?
i'm not experiencing disconnections but have all and only skalarki hardware.
regards
fil

[jeehell]

You can always change it cannot hurt...
It may also be unrelated, I'm not sure how this bug arises exactly yet.

JL

[jess-b]

A couple of observations from a recent flight out of heathrow.
1. The seatbelt sign, set in auto, switches off around 1000ft agl
2. I had a problem with managed climb on the Sid (dep 27R DVR5F) during the initial turn, the aircraft speed exceeded 300kts before the throttle rolled back to idle and the nose began to drop (in an effort to control the speed, my VS hit 5200fpm). Once the auto throttle cut in, it's all returned to normal.

Jess B

[OmniAtlas]

Latest update -- No superimposed terrain data onto the ND when ADIRS is switched off seems to be fixed.
Thank you.

A few minor observations
1. At Flaps full -- flap sound continues to loop
2. T.O memo on ECAM still appears after landing
3. Waypoints -- for 2 points that require the aircraft to 'loop' around, there is not a clear NAV pathway, jumps to the left and right prior to the point. Hard to explain, I will try and take a screenshot next time this shows up.

Any possibility of integrating the CPDLC server module into the Jeehell server.exe?

Thank you for the quick update and fixes JL.

[filippoporcari]

jess were u flying AP on or off?
if ap was on that's weird because never experienced this.
fil

[jess-b]

Autopilot was on and in managed mode. It may just be that particular SID. I'll refly that departure and see if the fault is reproducible.

[filippoporcari]

and...was SRS annunciated on FMA?
yep this is strange
fil

[jess-b]

Just reflown the departure, and no fault. So I'm chalking this one up to user error. :)

however, the seatbelt sign went off at 800agl and the the no smoking sign, which was set to in, not auto. Weird.

[stefangr]

Any possibility of integrating the CPDLC server module into the Jeehell server.exe?

I don't know if that would be a good idea. Many functions of the CPDLC server are independant of the JL software, so they are maintained only by Chris and he can provide updates as it is needed. I also don't see the necessity, I have built the CPDLC server startup into my PC startup sequence, and it's working fine that way.

Stefan

[OmniAtlas]

Not too sure why, but now FMGS fails to completely start up

Here is a video of the issue --


http://youtu.be/p11ZKH6ViTg

This is when I first start FMGS, and try and turn on ext power. Flashing ND/PFD/EICAM also happens with APU turned on.

Warning and alert sounds are ongoing followed by a crash --

Problem signature:
Problem Event Name: BEX
Application Name: EIS.exe
Application Version: 0.35.0.0
Application Timestamp: 54341084
Fault Module Name: NavDB.dll_unloaded
Fault Module Version: 0.0.0.0
Fault Module Timestamp: 5424813b
Exception Offset: 09a1d2c5
Exception Code: c0000005
Exception Data: 00000008
OS Version: 6.1.7601.2.1.0.256.1
Locale ID: 1033

[filippoporcari]

hi jl,
since latest update i don't have any trim wheels motion (skalarki hardware which was working before) i checked on SD f-ctl page and the trim values remained at 0.0 for the entire flight...it was changing values before.
btw the autotrim seemed to work because i hand flew circuits very well there is just no trim value changing.
do u confirm this?

....had my first hardwareconnect crash today...just restarted it...
i cannot change port5 to 8002 because that port is used by widefs and since i'm a nerd in port communication just left it at 8007...any other value we can safely try?

all the best
fil

[filippoporcari]

sorry jl,
forgot to report that also left and right brake pressure readouts on skalarki triple gauge are missing since then...don't have installed soft triple gauge so cannot check if the output is missing everywhere.
the ACCU PRESS is there instead
cheers
fil

[OmniAtlas]

Ah fixed my problem - had installed 35.4 by mistake, latest version is 35.7.

[jeehell]

You have almost every ports between 1 and 65535, that's a lot of ports to try...
You could opt for ports below 8000 or for the 9000 range as well...

The triple brake only work when in ALTN BRK mode (green HYD LO PR). In normal conditions, you only have the ACCU PRESS at the max.


JL

[filippoporcari]

ok for the ports thx...told u i'm a nerd at that!

about brakes: i know its logic jl :-) the point is that with engines not running (green system not pressurized) when u set parking brakes the L and R indicator should indicate max...it was working before...not now.

what about trim indication?

[jeehell]

Hi,

The latest update is available on the auto updater or here:
http://www.jeehell.org/A320FMGS_B35.7.exe


Fil, the trim should be corrected in that version, if Marcin also updated his soft.

Regards,
JL

[filippoporcari]

hi all,
thx jl...after today's update the trim is back! :-) now just marcin needs some work to perfectly sincronize it.

btw i'm actually flying and see for the first time both PFDs lagging a lot...did u change something in that area? or is it a local prob?
thx
fil

[buentead]

If one is using WideClient, e.g. to run TopCat on a separate PC, I suggest not to use port 8002 (instead of 8007) as this is used by WideFS of FSUIPC by default (and it also uses 9002).

I changed the port 8007 to 8107 for the time being. A 1st short flight is looking good. But more testing is required.

Regards
Adrian

[filippoporcari]

ouch!!! i'm using 9002 now! that could be the reason for the lagging?

[buentead]

@fil: Yes, it might well be. When I used port 8002 first and started WideFMGS client, the WideFS server was reporting "connected and then waiting for client" continuously.

@JL: With port set to 8107 (instead of 8007) the HardwareConnect crashed again. Please find attached the event log. I used the latest updates from your server (I assume it's 35.7).

Thanks
Adrian

[Miatanet]

Hi all
changed port to 8002 and still have the hardwareconnect.exe crash every now and then.

best
stefan

[buentead]

Stefan, in case you are using WideFS Server from FSUIPC you may not use 8002 as this is the default port. I used 8107 instead. Nevertheless, my HardwareConnect also crashed.

cu, Adrian

[jeehell]

Hi Adrian,

The windows report log is mostly useless for me, I'm more interested in the HClog.txt in the hardware modules folder.


By the way, to everyone: I'll be away for the week.


Regards,
JL

[asessa]

Great flight yesterday night!
I flown from LOWW to LIRF without any problem!

Perfect job for me , JL!

[RigoA320]

Hello JH

Wanted to know how I can activate the weather radar, now and then a radar display shows only color Weis times. ?

Regards Rigo

[gleichi]

Hello!

first: jeehell, great work!

i have some problems with the connection from PC2 to PC1.

Ports 8003-8007 TCP are open in Router.
Firewall is shutdown on both PCs
IPAdress PC2 from cmd ipconfig 192.168.2.176

When i start the starter on PC2... opens OVHD, EWD, CPT ND and CPT PFD. But on PC1 shout: disconnect (this modules)

The widefmgs on PC2 shout: TsimAPIthread timeout

Any ideas?

kind regards
tom

[gleichi]

by the way:

after install FMGS my fs9 doesn't put out any sound?!

[asessa]

Hello JH

Wanted to know how I can activate the weather radar, now and then a radar display shows only color Weis times. ?

Regards Rigo

The suite hasn't a weather radar.

[RigoA320]

And ground radar? Regards Rigo

[asessa]

And ground radar? Regards Rigo

Do you mean EGPWS radar? If yes it there is...

[RigoA320]

Yes. I see ND in a radar every few minutes, at least I think so, but running ND is only looking color, then again Nodmal ?? Regards Rigo

[RigoA320]

Yes
Regards Rigo

[skalarki]

Hi,

The latest update is available on the auto updater or here:
http://www.jeehell.org/A320FMGS_B35.7.exe


Fil, the trim should be corrected in that version, if Marcin also updated his soft.

Regards,
JL

Hi all

I will do update concerning trim wheels, but it will take some time due to madness before Lelystad event.
BTW. I will be happy to see any of you guys :)

Regards, Marcin

[Miatanet]

Hi all

just did a leg from LFMN to LSZH without any trouble, no more hardwareconnect.exe crashes. Used for port5 8057 on all systems.

@Marcin
see ya in Lelystad :-)

Best
Stefan

[jess-b]

Quick but report from tonight's flight. I flew from eddh to Egll. Two things I noticed.

1. I just don't see traffic displayed despite tcas being on.
2. Approaching heathrow's 27R on lam3a star, I selected 'loc' on the fcu. The aircraft immidately began banking to the right to intercept the localiser, but continued to beyond 90°. I only managed to save the aircraft by taking control. I'll retest tomorrow to confirm the issue.

My my only other gripe is getting to grips with the flight controls. Often on approach the aircraft feels slow to respond in P3D. In fsx if anything it feels like it's twitchy and easy to over correct. I'm guessing it's a personal thing and I need to get use to it. Either way, this is a fantastic piece of software Jean Luc

Jess B

[RigoA320]

JH Hall

Yesterday test flight from EDDP - LSZH without problems very good.
all instruments work good. not a malfunction.

Regards Rigo

[SimStar001]

Hi all, does anybody know if it is possible to save and load CORTE in FMGS? if it is, how to do it?

thanks for help

Best Regards. Marco

[asessa]

It isn't possible.

[RigoA320]

Hello JH Why is my Terr On ND when it is activated, only Color Weis and do not fret? Regards Rigo

[stefangr]

Hello JH Why is my Terr On ND when it is activated, only Color Weis and do not fret? Regards Rigo

Hi Rigo,

have you installed the EGPWS data as described in the advanced user manual?

Stefan

[RigoA320]

Hi Stefan No, I did not know where I get the data?

Regards Rigo

[OmniAtlas]

Hi Stefan No, I did not know where I get the data?

Regards Rigo

Read this -- https://www.dropbox.com/s/ylr5qi509s404i1/AdvancedUsersSetup.pdf

It will step you through it. Regards.

[tcane]

Hi Jh,
Hope You had a nice week of vacation. (I hope it was a vacation :))
Since your last version I can't see the vor, waypoints, airports etc. on the ND when I activated. All other things works very well for me.

king regards
Florian

[filippoporcari]

florian that should be a local issue: on my system i have all the desired infos (vors, ndbs, apts) on NDs...i manually put the NAVRECORD.dat file in navdata folders on the clients as suggested by jl.

JL: making some circuits today at LIRF, takeoff and landing on 34L on the PFD the ils appeared correctly tuned and identified but both glide and loc diamonds did not move just stay there on one side of the scale.
where could this come from? scenery? or data sending? never experienced this in the past...
regards
fil

[tcane]

florian that should be a local issue: on my system i have all the desired infos (vors, ndbs, apts) on NDs...i manually put the NAVRECORD.dat file in navdata folders on the clients as suggested by jl.

fil

Hi Fil,

so this is strange, because i´m not the only one with this small issue. A buddy got the same problem.

You have to put the NAVRECORD.dat file in this folder on a client PC? I thought it comes only to this folder on the Server PC, because this is done on my machine.
If you have to do it now, so it's new for me... but i will try in the next time. The strange thing in this fall is, that it´s works before the update...

King Regards
Florian

[filippoporcari]

the new procedure of putting the .dat file is not mandatory but at discretion as explained in the WHATSNEW txt file after last update.
cheers
fil

[buentead]

I made several flights during the past days - a great software ;). HardwareConnect.exe crashed only twice - not so often as before. Please find below the HClog.txt just after the crash of today flight:
*16:58:57*:HardwareConnect Launched
*16:58:59*:CPFlightmodule.dll loaded
*16:58:59*:FSUIPCmodule.dll loaded
*16:58:59*:SkalarkiIO.dll loaded
*16:58:59* SkalarkiIO.dll:Starting server at (null):25253...
*16:58:59* SkalarkiIO.dll:Waiting for client...
*17:02:36* SkalarkiIO.dll:Client connected: 127.0.0.1:55940
*17:02:36* SkalarkiIO.dll:Waiting for client...
*17:02:42* SkalarkiIO.dll:Client connected: 127.0.0.1:55941
*17:02:42* SkalarkiIO.dll:Waiting for client...
*17:02:42* SkalarkiIO.dll:Client disconnected: 127.0.0.1:55941
*17:02:42* SkalarkiIO.dll:Client connected: 127.0.0.1:55942
*17:02:42* SkalarkiIO.dll:Waiting for client...
*17:03:27* SkalarkiIO.dll:Client disconnected: 127.0.0.1:55942
*17:03:27* SkalarkiIO.dll:Client connected: 127.0.0.1:55943
*17:03:27* SkalarkiIO.dll:Waiting for client...
*17:31:14*:Fast Timer SendCopyDataMsg failed

These are my configured ports of WideFMGS on all PC's
port=8003
port2=8004
port3=8005
port4=8006
port5=8107
port6=8008


Regards
Adrian

[jeehell]

Hi all,

Newer version available see here:
http://www.mycockpit.org/forums/showthread.php?t=28582

Regards,
JL