johankotze
08-06-2014, 05:53 AM
I wired the 5 Rotary encoders for the following, heading,speed, Altitude, Altitude V/S, Nav 1 Radio Frequency.
Nav 1 Radio Frequency = B12 (left turn decrease, FSUIPC4Button 11), B13 (right turn increase, FSUIPC4 Button 12)
Alt V/S = B14 (left turn decrease Alt V/S, FSUIPC4 Button13), B15 (right turn Increase Alt V/S, FSUIPC4 Button 14)
Alt = B16 (left turn, FSUIPC4 Button 15), B17 (right turn,FSUIPC4 Button 16)
Speed = B18 (left turn decrease, FSUIPC4 Button 17), B19(right turn increase, FSUIPC4 Button 18)
Heading = B20 (left turn, FSUIPC4 Button 19), B21 (rightturn, FSUIPC4 Button 20)
I also try to configure the rotary encoders 1:2, 1:2 etc. ……,but when turn the rotary encoder in either direction the values (digits) increaseand it is very jumpy and unstable.
What I really need is someone to help me in laymen’s termshow to configure and set up the rotary encoders to work. The rotary encoders is15 degrees, 24 pulses per revolution.
Nav 1 Radio Frequency = B12 (left turn decrease, FSUIPC4Button 11), B13 (right turn increase, FSUIPC4 Button 12)
Alt V/S = B14 (left turn decrease Alt V/S, FSUIPC4 Button13), B15 (right turn Increase Alt V/S, FSUIPC4 Button 14)
Alt = B16 (left turn, FSUIPC4 Button 15), B17 (right turn,FSUIPC4 Button 16)
Speed = B18 (left turn decrease, FSUIPC4 Button 17), B19(right turn increase, FSUIPC4 Button 18)
Heading = B20 (left turn, FSUIPC4 Button 19), B21 (rightturn, FSUIPC4 Button 20)
I also try to configure the rotary encoders 1:2, 1:2 etc. ……,but when turn the rotary encoder in either direction the values (digits) increaseand it is very jumpy and unstable.
What I really need is someone to help me in laymen’s termshow to configure and set up the rotary encoders to work. The rotary encoders is15 degrees, 24 pulses per revolution.