Leo Bodner

[johnnyg]

what do you need to make the digits or lights change on a radio panel using a Leo Bodner BU0836X controller board and a segmented lighted display board? A wiring diagram and picture would also be helpful.

[tiburon]

You can't. The Bodnar controller is an input card, so it only connects switches and encoders.
You will need an output card.
This might help you along :

http://www.flightsimparts.eu/Simulator_PoKeys_7Segment.html

Similar solutions are to be found at Opencockpits and other manufaturers.

[Westozy]

Agreed, these are what I just fitted to my Landing and Cruise Alt displays in my FWD overhead - they work perfectly with Prosim! For radios I think you are better off buying them PnP!

http://www.flightsimparts.eu/Simulator_PoKeys_7Segment.html


Cheers Gwyn

[johnnyg]

9704Should the LED displays move on the altitude display showing the altitude when you turn the encoder dial. here's how I wired it. It don't move what do I need to change to make the numbers change in the FSX 10 program. See Attached photo.

[johnnyg]

I got them to change thanks.