Revised test version of wideFS (6.414)

[Peter Dowson]

Hi folks,

Here is the latest interim test version of WideFS modules WideClient and
WideServer. They are now at version 6.414. Please replace the previous interim
version of WideClient (6.412) I uploaded here.

These are more finely tuned and so far seems to give excellent service, even
to multiple PM modules running on the same client.

As before, please do retain your main versions for now and let me know how
you get on with these.

Regards,

Pete

[null null]

Hi Peter
Previous test version woks fine and smooth n a 6 PC environment.Will test
new tomorrow

Tom
"Peter Dowson" escribió en el mensaje
news:271822.53969@wb.onvix.com...
> Hi folks,
>
> Here is the latest interim test version of WideFS modules WideClient and
> WideServer. They are now at version 6.414. Please replace the previous
interim
> version of WideClient (6.412) I uploaded here.
>
> These are more finely tuned and so far seems to give excellent service,
even
> to multiple PM modules running on the same client.
>
> As before, please do retain your main versions for now and let me know
how
> you get on with these.
>
> Regards,
>
> Pete



----------------------------------------------------------------------------
----


>

[Martin Gerner]

Seems to work even better than 6.412 in my (mouseclicker only...) setup.
:-)

--
Mit freundlichen Grüßen,
kind regards


Martin Gerner

http://mpgtext.de
http://realsimulation.com


This mail is Norton Anti-Virus certified virus-free.
Diese Mail ist von Norton Anti-Virus als virenfrei zertifiziert.
"Peter Dowson" wrote in message
news:271822.53969@wb.onvix.com...
> Hi folks,
>
> Here is the latest interim test version of WideFS modules WideClient and
> WideServer. They are now at version 6.414. Please replace the previous
> interim
> version of WideClient (6.412) I uploaded here.
>
> These are more finely tuned and so far seems to give excellent service,
> even
> to multiple PM modules running on the same client.
>
> As before, please do retain your main versions for now and let me know
how
> you get on with these.
>
> Regards,
>
> Pete



--------------------------------------------------------------------------------


>

[Simon Kneller]

Pete,

Not sure why but I can't seem to extract WideClient.exe from the zip file. I

can extract WideServer, but I get an "Error copying file" message on
WideClient.

I've tried redownloading, clearing the cache etc but to no avail.

Could you possibly repost the zip file again?

Cheers

Simon.
"Peter Dowson" wrote in message
news:271822.53969@wb.onvix.com...
> Hi folks,
>
> Here is the latest interim test version of WideFS modules WideClient and
> WideServer. They are now at version 6.414. Please replace the previous
> interim
> version of WideClient (6.412) I uploaded here.
>
> These are more finely tuned and so far seems to give excellent service,
> even
> to multiple PM modules running on the same client.
>
> As before, please do retain your main versions for now and let me know
how
> you get on with these.
>
> Regards,
>
> Pete



--------------------------------------------------------------------------------


>

[Thomas Richter]

Hi Simon,
I had the same problem.
Download it from ProjectMagenta.Support-site direct -- NOT with Outlook
Express.
I did the same and then it works.
--
Best Regards
Thomas - EW321

"Simon Kneller" schrieb im Newsbeitrag
news:272216.53969@wb.onvix.com...
> Pete,
>
> Not sure why but I can't seem to extract WideClient.exe from the zip file.

> I
>
> can extract WideServer, but I get an "Error copying file" message on
> WideClient.
>
> I've tried redownloading, clearing the cache etc but to no avail.
>
> Could you possibly repost the zip file again?
>
> Cheers
>
> Simon.
> "Peter Dowson" wrote in message
> news:271822.53969@wb.onvix.com...
>> Hi folks,
>>
>> Here is the latest interim test version of WideFS modules WideClient and
>> WideServer. They are now at version 6.414. Please replace the previous
>> interim
>> version of WideClient (6.412) I uploaded here.
>>
>> These are more finely tuned and so far seems to give excellent service,
>> even
>> to multiple PM modules running on the same client.
>>
>> As before, please do retain your main versions for now and let me know
> how
>> you get on with these.
>>
>> Regards,
>>
>> Pete
>
>
>
>
--------------------------------------------------------------------------------
>
>
>>
>

[Simon Kneller]

Thanks for the advice Thomas, I'm up and running now.

"Thomas Richter" wrote in message
news:272219.53969@wb.onvix.com...
> Hi Simon,
> I had the same problem.
> Download it from ProjectMagenta.Support-site direct -- NOT with Outlook
> Express.
> I did the same and then it works.
> --
> Best Regards
> Thomas - EW321
>
> "Simon Kneller" schrieb im Newsbeitrag
> news:272216.53969@wb.onvix.com...
>> Pete,
>>
>> Not sure why but I can't seem to extract WideClient.exe from the zip
>> file.
>
>> I
>>
>> can extract WideServer, but I get an "Error copying file" message on
>> WideClient.
>>
>> I've tried redownloading, clearing the cache etc but to no avail.
>>
>> Could you possibly repost the zip file again?
>>
>> Cheers
>>
>> Simon.
>> "Peter Dowson" wrote in message
>> news:271822.53969@wb.onvix.com...
>>> Hi folks,
>>>
>>> Here is the latest interim test version of WideFS modules WideClient
and
>>> WideServer. They are now at version 6.414. Please replace the previous
>>> interim
>>> version of WideClient (6.412) I uploaded here.
>>>
>>> These are more finely tuned and so far seems to give excellent service,
>>> even
>>> to multiple PM modules running on the same client.
>>>
>>> As before, please do retain your main versions for now and let me know
>> how
>>> you get on with these.
>>>
>>> Regards,
>>>
>>> Pete
>>
>>
>>
>>
>
--------------------------------------------------------------------------------
>>
>>
>>>
>>
>

[null null]

Peter, you are saying I can run both PFD and EICAS in a single P4 3ghz 1g
ramwith matrox pharelia 512 and 3 tft monitors smoothly enough ?

Tom
"Peter Dowson" escribió en el mensaje
news:271822.53969@wb.onvix.com...
> Hi folks,
>
> Here is the latest interim test version of WideFS modules WideClient and
> WideServer. They are now at version 6.414. Please replace the previous
interim
> version of WideClient (6.412) I uploaded here.
>
> These are more finely tuned and so far seems to give excellent service,
even
> to multiple PM modules running on the same client.
>
> As before, please do retain your main versions for now and let me know
how
> you get on with these.
>
> Regards,
>
> Pete



----------------------------------------------------------------------------
----


>

[Peter Dowson]

On 11/24/2004 4:23:07 PM, TOMAS MOLINA wrote:
>Peter, you are saying I can
>run both PFD and EICAS in a
>single P4 3ghz 1g
>ramwith matrox pharelia 512
>and 3 tft monitors smoothly
>enough ?
Yes, you should be able to, easily. In my case there are three differences:

1. I am running 3 (three) copies of PFD.EXE -- Captain's PFD/ND, EICAS+Stby,
and FO's PFD/ND. Of these the Captain's PFD/ND runs the fastest, the other
two have "UseTimer=On" parameters and run slower -- about 10-12 data rate
normally. without the UseTimer there are occasional jerks as the three PFDs
compete for WideClient.

2. The PC is not a 3GHz but a 2.4GHz.

3. The Parhelia on that PC is a 256, not a 512. The 512 is on my FS PC (the
Server) which is a 3.2GHz.

It is smooth enough, for sure. But I am waiting for the happy day when Enrico
will have made all those displays work in one window with one copy of
PFD.EXE. He started on this, and there is a demo mode for it, but it doesn't
work properly.

If you don't want the F.O. displays you can already do it all in one Window
in any case, so if that's what you want to do that's what I would
recommend.

Regards,

Pete

[null null]

Thanks Peter.Great news.Now I have to see how to proceed

Tom
"Peter Dowson" escribió en el mensaje
news:272242.53969@wb.onvix.com...
> On 11/24/2004 4:23:07 PM, TOMAS MOLINA wrote:
> >Peter, you are saying I can
> >run both PFD and EICAS in a
> >single P4 3ghz 1g
> >ramwith matrox pharelia 512
> >and 3 tft monitors smoothly
> >enough ?
> Yes, you should be able to, easily. In my case there are three
differences:
>
> 1. I am running 3 (three) copies of PFD.EXE -- Captain's PFD/ND,
EICAS+Stby,
> and FO's PFD/ND. Of these the Captain's PFD/ND runs the fastest, the
other
> two have "UseTimer=On" parameters and run slower -- about 10-12 data rate
> normally. without the UseTimer there are occasional jerks as the three
PFDs
> compete for WideClient.
>
> 2. The PC is not a 3GHz but a 2.4GHz.
>
> 3. The Parhelia on that PC is a 256, not a 512. The 512 is on my FS PC
(the
> Server) which is a 3.2GHz.
>
> It is smooth enough, for sure. But I am waiting for the happy day when
Enrico
> will have made all those displays work in one window with one copy of
> PFD.EXE. He started on this, and there is a demo mode for it, but it
doesn't
> work properly.
>
> If you don't want the F.O. displays you can already do it all in one
Window
> in any case, so if that's what you want to do that's what I would
> recommend.
>
> Regards,
>
> Pete
>