Jan Pemoeller
11-27-2004, 01:52 PM
Maybe this helps:
SquawkBox 3 Specific Offsets:
0x7b91 1
Transponder mode
0 = normal
1 = standby
SquawkBox reads this value to determine which transponder mode to send to
the network. Your transponder gauge should set this offset when the user
changes modes with your gauge.
Regards
Jan
"Peter Nielsen" schrieb im Newsbeitrag
news:271720.53947@wb.onvix.com...
> Enricco
> I have the various radio panels from CP Flight which work very well,
> except
> for the ability to Squawck Stand By mode when on line with VATSIM.
>
> Claudio, advises me this needs to be implemented from the software side
of
> PM, is this correct? or does it need to be implemented from the software
> side
> of SB of FSINN?
>
> The actual Xponder codes work perfect but just not the Stand by and
Active
> mode.
>
> Any ideas
> Peter
>
SquawkBox 3 Specific Offsets:
0x7b91 1
Transponder mode
0 = normal
1 = standby
SquawkBox reads this value to determine which transponder mode to send to
the network. Your transponder gauge should set this offset when the user
changes modes with your gauge.
Regards
Jan
"Peter Nielsen" schrieb im Newsbeitrag
news:271720.53947@wb.onvix.com...
> Enricco
> I have the various radio panels from CP Flight which work very well,
> except
> for the ability to Squawck Stand By mode when on line with VATSIM.
>
> Claudio, advises me this needs to be implemented from the software side
of
> PM, is this correct? or does it need to be implemented from the software
> side
> of SB of FSINN?
>
> The actual Xponder codes work perfect but just not the Stand by and
Active
> mode.
>
> Any ideas
> Peter
>