spiliot
11-02-2016, 05:46 PM
Hi everyone.
I've created a virtual RMP panel for use with Jeehell.
http://www.mycockpit.org/forums/attachment.php?attachmentid=11827&stc=1
You can set the two available FS frequencies, VHF1 or VHF2, either by spinning the mouse wheel or by left/right clicking on the outer and inner knobs. Activate the Standby frequency with the TRANSFER (<->) button.
The panel works with SimConnect and doesn't really speak to Jeehell at this time, so only those two buttons work.
The latest release (https://github.com/spiliot/jeehellrmp/releases) is v1.0.0. Download the zip, extract both files in the same folder and run JeehellRMP.exe. More info is available at the readme (https://github.com/spiliot/jeehellrmp/blob/437f9fcd8ea996ad05d49fdd303be87ac842be32/Readme.md).
The project is open source, with a Creative Commons license and available on gitbub (https://github.com/spiliot/jeehellrmp).
I'd appreciate if you use Github issues (https://github.com/spiliot/jeehellrmp/issues) for problems you might encounter.
Assuming that JH simulates all RMP functions, the next version will connect to Jeehell and bring either or both of:
- Using the other RMP functions (like STB NAV)
- Supporting all three RMPs (which should light the SEL lamp if the "wrong" radio is selected for each side)
I've created a virtual RMP panel for use with Jeehell.
http://www.mycockpit.org/forums/attachment.php?attachmentid=11827&stc=1
You can set the two available FS frequencies, VHF1 or VHF2, either by spinning the mouse wheel or by left/right clicking on the outer and inner knobs. Activate the Standby frequency with the TRANSFER (<->) button.
The panel works with SimConnect and doesn't really speak to Jeehell at this time, so only those two buttons work.
The latest release (https://github.com/spiliot/jeehellrmp/releases) is v1.0.0. Download the zip, extract both files in the same folder and run JeehellRMP.exe. More info is available at the readme (https://github.com/spiliot/jeehellrmp/blob/437f9fcd8ea996ad05d49fdd303be87ac842be32/Readme.md).
The project is open source, with a Creative Commons license and available on gitbub (https://github.com/spiliot/jeehellrmp).
I'd appreciate if you use Github issues (https://github.com/spiliot/jeehellrmp/issues) for problems you might encounter.
Assuming that JH simulates all RMP functions, the next version will connect to Jeehell and bring either or both of:
- Using the other RMP functions (like STB NAV)
- Supporting all three RMPs (which should light the SEL lamp if the "wrong" radio is selected for each side)