Nav data

[mike24]

Hi
1 what should be in the fsscenery file in the nav data folder where all the bin files are
should this be in the client pc as well where nd are?

2 is their anybody with a file that changes the landing light pattern on the ground for jeehell a320
3 is it possible to null an area of the throttle its just that I go from idle to 50% within a very small movement
Thankyou
Mike

[jeehell]

The fsscenery is mostly for the server PC.
YOu have to get in here the scenery.cfg location of your FSX/P3D install (it is in various locations depending on your version), the path to the FSX/P3D main folder, and the path to the location where you install your navdata (for auto updating when you download from navigraph/aerosoft).
On clients, you only need to input the IP to your server PC.

JL

[mike24]

Thanks for the info jeehell
Q my scenery cfg has a lot of scenery in it so I only activate some when needed does that make a difference when your software reads the scenery cfg

It's just that no matter what I do e.g. when landing at some airports im not lined up with the runway when I'm landing in ILS
I've read most of the posts on this including magnetic change I use p3dv3 navigrapth
And still can't solve this problem
Maybe I should try aerosft version of nav
Thanks

[jeehell]

For the database building, the scenery addons MUST be active. If your issues are on RWY of addon sceneries, this is very likely your issue.
I personally do not have issues (or at least not on the ILS's I have tested).
I suggest you activate all your sceneries in the CFG, build the navdata again (ie delete bin files first) then go back to your old way (activating only sceneries you will use in your flight).

I use navigraph by the way... and have used aerosoft as well, they do/should not make a difference if everything is correctly set up.

JL

[mike24]

Yes addon scenery e.g. UK scenery manchester and new aerosft Manchester x
new LFPG most addon scenerys ok
Strange
Thankyou

[mike24]

Question
This is manchester egcc
For e.g. this on nd is on final all waypoints good up to runway so am still in managed mode
And using vs to bring me down to the runway lines up
But as you can see on pfd ILS is to the left if I press ILS
it brings me down to the left of runway
Is this an afcad problemhttp://www.mycockpit.org/forums/attachment.php?attachmentid=12048&stc=1

[mike24]

http://www.mycockpit.org/forums/attachment.php?attachmentid=12049&stc=1

[jeehell]

Hi

Either navdata did not build correctly or the scenery has different ILS (ID, rwy name) than navigraph...

JL

[mike24]

I have rebuilt several times got lrid of all bins and then rebuilt then passed out to clients
including fss scenery
Is this information in the afcad ? Eg ID Ray name
thankyou

[jeehell]

yes it can be...

[mike24]

Still have the same problem e.g., on lIS it is not aligned with runway at my egcc and quite a few out her airports
Either navdata did not build correctly or the scenery has different ILS (ID, rwy name(can anybody help me to renew the nav data fixes in p3dv4 and check the ID, Run name in afcad and also change it if wrong
Thankyou