LOC Misaligned in SPJC

[ShdwZX]

Hi,

First of all, congratulations for the software. I recently star building my simulator the past year and everything was great so far.

Some days ago, I made a flight in Lima, Peru (SPJC) and noticed that the localizer was misaligned with the runaway, when tried an ILS approach the plane ended in the grass. I currently use the last AIRAC, and also tested it with the past Navigraph’s AIRACS (1613 and 1506) and the result is the same. I also updated the magnetic variation and nothing.
Then I try with the Aerosoft Airbus with the same Navdata and it was aligned. So it could be an error with the Navigraph distribution for JeeHell, the software itself or maybe something in my configuration.


My current setup is: P3D v3, JeeHell B46.0, Navigraph AIRAC 1701 and the stock airport (previously named SPIM in P3D)
P.D: Also the same problem happens with the Pisco airport (SPSO)



Thanks and greetings from Peru
Alvaro

[digidax]

Hi Alvaro,

the problem you have are outdated scenery files for this airport. I had the same problem with EDDF.
Please note, that also changed ILS frequencies could make stupid the ILS approach.

Search the web for free or payware scenery files for this airport and compare it with the actual charts.
The charts and the AIRAC cycle you use should be on the same time base.

best, Frank

[ShdwZX]

Hi Frank,

The frequency is the same for the current chart (109.7). I will try to find an updated scenery and post the updates on this subject.


Many thanks,

Alvaro

[jeehell]

I did not check yet, but not only the ILS freq needs to be correct, it looks for ILS ID, RWY QFU and a few others.

[masterp]

I had the same problem before. However follow Jeehell advise, to recreate .bin files after new addon scenery is installed, the LOC is well aligned.

[digidax]

There is also this way, I have used it to edit EDDL's G/S Transmitter coordinates:

1. Use ILS Inspector/Editor (http://www.aero.sors.fr/navaids.html) on the Server and make your changes on the airport and runway compared to the actual AIRAC and charts.

2. Delete all BIN files in the directory of the FMGS server.

3. Start the FMGS server, new BIN files (10 pcs.) are created after a short time (based on the used AIRAC and the changed (point 1.) scenery files)

4. Copy the BIN files to the FMGS directory on all PC's which are displaying a ND. (in my case one for the CPT and one for the FO)

With the ILS Inspector/Editor you can change / edit ILS frequency, ident, geo coordinates for LOC or G/S transmitter, runway parameters, PAPI and much more. The tool can also compare your installed sceneries with the actual AIRAC and shows you missconfigurations. This one you should edit if you are using this airport.

HTH Frank

[OmniAtlas]

Hi Alvaro,

the problem you have are outdated scenery files for this airport. I had the same problem with EDDF.
Please note, that also changed ILS frequencies could make stupid the ILS approach.

Search the web for free or payware scenery files for this airport and compare it with the actual charts.
The charts and the AIRAC cycle you use should be on the same time base.

best, Frank

With EDDF I believe you can fix the problem by putting this in additional.txt in the NAVDATA folder and rebuilding:

PF|EDDF|ED|I25C|A|MTR|010|MTR|ED|D |V C||||IF||| ||||||+|5000|0|0||||
PF|EDDF|ED|I25C|A|MTR|020|D159H|ED|PC|EY ||||CF|FFM|ED|D ||61.9|12.3|159.0|8.3||0|0|0||||
PF|EDDF|ED|I25C|A|MTR|030|REDGO|ED|PC|EE ||||CF|IFCW|ED|PI||68.6|13.5|248.0|3.0|+|4000|0|0||||
PF|EDDF|ED|I25C|I||010|REDGO|ED|PC|E I||||IF|IFCW|ED|PI||68.6|13.5|||J|4000|4000|0||||
PF|EDDF|ED|I25C|I||020|FI25C|ED|PC|E F||||CF|IFCW|ED|PI||68.6|9.3|248.0|4.2|H|4000|2610|0||-3.0|FFM|
PF|EDDF|ED|I25C|I||030|RW25C|ED|PG|G M||||CF|IFCW|ED|PI||68.6|2.4|248.0|6.9||414|0|0||-3.0||
PF|EDDF|ED|I25C|I||040||| | M ||||CA||| ||||248.0||+|770|0|0||||
PF|EDDF|ED|I25C|I||050|FW|ED|DB|E ||||CF|FFM|ED|D ||249.0|8.6|248.0|5.6||0|0|0||||
PF|EDDF|ED|I25C|I||060|DF282|ED|PC|EY ||||CF|FFM|ED|D ||248.6|12.0|248.0|3.5||0|0|0||||
PF|EDDF|ED|I25C|I||070|DF282|ED|PC|E ||||FA|FFM|ED|D ||248.6|12.0|248.0||+|5000|0|0||||
PF|EDDF|ED|I25C|I||080|TAU|ED|D |V |R|||DF||| |||||||0|0|0||||
PF|EDDF|ED|I25C|I||090|MTR|ED|D |VE H|R|||CF|FFM|ED|D ||30.3|15.7|85.0|26.5||5000|0|0||||

More information in this thread: http://www.mycockpit.org/forums/showthread.php?t=30070&page=2

[michael1508]

For the original problem renewal of the . Bin files should be sufficient. I have had the same issue