Buddym
11-21-2017, 04:44 PM
I wanted to post an official review of my experience with ALLPCB.COM. (https://l.facebook.com/l.php?u=http%3A%2F%2FALLPCB.COM%2F&h=ATMFtLnU5mD-HCeGORQxQmEKgFoAUsrp_eFsZlyKLC4ZG6JGAZ48-ainiWGEkSQtS52oaCOfSa5wyRErMfzjnYM8tEf9WtSmnY58oRo16V7qtpWZarN-zuoJVAtRJYc9X2Gwb3SxuCR48YfbAeUZBXOD4y3f3PCceIJoMTFUOg4PwpRyoBLR3nLcy25TgcVTC3UzR9VV0mADe1LYqiF7t2qsS0s--2sJFTNKKAdjsRJ0TyySiFA_dBi9VV0nhVBdBtWOPO-2ql8-FNjC_dUBereaK5RAcNAUVvzDkt_qBQ) I've had numerous PCBs made and they've done a fantastic job! I originally had some Igor boards made, which are AVR-based USB boards that have 8 outputs to drive LEDs. These boards were excellent quality! Next I had some FCU displays FCBs made for A320 FCU panels. Again, these were excellent quality. ALLPCB contacted me to check on a design detail and then quickly made the boards. The shipping was fast too!... More recently I made a second version of the FCU displays PCB. This new version splits the 16 digit displays into 2 groups of 8, instead of 1 group of 16. This means it will work properly with MAX7219 drivers and Mobiflight. I will be designing the MAX7219 driver boards to interface directly with the Mobiflight board. Anyway, the current PCB to be made will be my A320 MCDU PCB. I designed a panel set based on several pictures I looked at, most notable being OC and similar, and then a PCB to match it. The new PCB design will be sent to ALLPCB.COM (http://allpcb.com/) today, and I expect the same excellent results as always. Here's a couple of pictures of the FCU PCB below. As you can see the quality of the board is excellent. Very clean traces, super-clear silk-screening, and the dimensions of the PCB are within .01 mm of my drawings. I can't wait to get the MCDU PCBs back!
Our hobby can be very expensive, and I like to pass along anything useful to the community. Don't be afraid to tackle having a board made. It's not that expensive and the resulting product is so much nicer than bread boarding with perf-boards. If you need to have boards made, please give ALLPCB.COM (http://allpcb.com/) a shot. If your experience is the same as mine you'll be very happy with the results. Sorry for the long post, but I thought they deserved a shout-out.
http://www.mycockpit.org/forums/attachment.php?attachmentid=12523&stc=1
http://www.mycockpit.org/forums/attachment.php?attachmentid=12524&stc=1
Our hobby can be very expensive, and I like to pass along anything useful to the community. Don't be afraid to tackle having a board made. It's not that expensive and the resulting product is so much nicer than bread boarding with perf-boards. If you need to have boards made, please give ALLPCB.COM (http://allpcb.com/) a shot. If your experience is the same as mine you'll be very happy with the results. Sorry for the long post, but I thought they deserved a shout-out.
http://www.mycockpit.org/forums/attachment.php?attachmentid=12523&stc=1
http://www.mycockpit.org/forums/attachment.php?attachmentid=12524&stc=1