View Full Version : 16/16/0 Card problem with FS2Phidgets
imported_Olympic260
01-18-2007, 06:09 AM
Hello,
I have a probelm with a 16/16/0 Interface card. Using FS2Phidgets TEST button I get only the Output Leds on the card to be ON the inputs are all OFF.
Using PMsystems, activating the 00 Input the 0 Output LED is ON. I have checked with PM sytems and everything is OK.
Is there a possibility to have a faulty card?
Regards
Chris
alandyer
01-18-2007, 01:47 PM
Chris,
The TEST only tests Output. (Leds and TextLCDs)
What type of switch do you have connected to input 0 ?
The is no intrinsic relationship between input 0 and output 0.
They are different ports.
What flight functionality are you attempting to achieve ?
Regards,
Alan
imported_Olympic260
01-18-2007, 03:05 PM
I try to connect a large toggle switch for the battery switch.
I connected the middle switch leg to the +5 the other leg to input 00 and nothng happens. I tryied also PM system directly and nothing there also.
I have connected the G ofcourse
What puzzles me also is using the test function of PM Systems for DI00 I get the output 00 LED to light...
I might have to search a bit more...
Chris
alandyer
01-18-2007, 03:39 PM
Does small led on card for port 0 illuminate and extinguish when you toggle switch on and off ?
imported_Olympic260
01-18-2007, 04:55 PM
No,
THe LED remaind OFF all the time. I made also the check with a small toggle switch with 3 contacts all connected and nothing
Chrus
alandyer
01-18-2007, 06:11 PM
Chris,
If indicator led is not illuminating when switch is on, then problem is either with your wiring or with card.
What are you using for power supply ?
If you replace Phidget card with a regular incandescant 5V lamp,
it should illuminate when switch is on.
This will eliminate or confirm your wiring as an issue
Regards,
Alan.
imported_Olympic260
01-19-2007, 02:20 AM
I am using an extra PC Powe supply which gives 5V.
The wiring is OK since I have checked it with a multimeter and the circuit is completed when the Switch is in the ON position.
Chris
Hey Chris,
Sorry to say, but it sounds like you may have a defective board. PM me so we can set up an exchange.