Steve Wekarchuk
02-12-2007, 10:13 AM
eBay
http://cgi.ebay.ca/ws/eBayISAPI.dll?ViewItem&item=4632058169&ssPageName=ADME:L:LCA:CA:31
*0x16x16 Phidget board (one unit)
LED_InterfaceIT 2 x LED's with completed annunciator
16 Digital Inputs and 16 Digital Outputs
Each input/output has an LED indicator which maked wiring very easy.
Inputs are activated by 4 to 30 Volt signal. Outputs sink up to 30V at 2A.
The outputs do not provide power they just act as switch to ground.
This InterfaceKit could be used in projects that need to turn on/off larger
loads: incandescent lights - relays - solenoids - motors - etc.
*LED64 Phidget boards (two units)
Phidget LED 64 controls up to 64 LEDs independently
Control On/Off AND Brightness
Units come with one 6VDC power supply
*Flight Deck Solutions B737NG Annunciator Kit
15 Boeing 737NG annunciators (replica)
Painted holders (boeing grey)
Laser cut legends
LED's installed (Green / Yellow / Red)
Pre-wired
Install, reconnect, and go!
http://cgi.ebay.ca/ws/eBayISAPI.dll?ViewItem&item=4632058169&ssPageName=ADME:L:LCA:CA:31
*0x16x16 Phidget board (one unit)
LED_InterfaceIT 2 x LED's with completed annunciator
16 Digital Inputs and 16 Digital Outputs
Each input/output has an LED indicator which maked wiring very easy.
Inputs are activated by 4 to 30 Volt signal. Outputs sink up to 30V at 2A.
The outputs do not provide power they just act as switch to ground.
This InterfaceKit could be used in projects that need to turn on/off larger
loads: incandescent lights - relays - solenoids - motors - etc.
*LED64 Phidget boards (two units)
Phidget LED 64 controls up to 64 LEDs independently
Control On/Off AND Brightness
Units come with one 6VDC power supply
*Flight Deck Solutions B737NG Annunciator Kit
15 Boeing 737NG annunciators (replica)
Painted holders (boeing grey)
Laser cut legends
LED's installed (Green / Yellow / Red)
Pre-wired
Install, reconnect, and go!