A320 FMGS B50

[jeehell]

Hi

Latest version is out, updater or:
http://www.jeehell.org/A320FMGS_B50.1.exe

!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
- A navdata re-build is necessary !!!!! You need to do Hervé Sors fix before, see below.
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
- Reworked RWY and ILS computations. Now RWYs and ILS should match very accurately with scenery IF the RWY/ILS have been updated using Hervé Sors tool: http://www.aero.sors.fr/navaids3.html
- Corrected XPDR : to enter a new squawk wit hahardware, you need a double CLR input first.
- Corrected Y ACCU resetting to 0 PSI on engine start (causing a spurious warning)
- Corrected QNH value discrepancy on PFDs and FCU
- Corrected steep turn (above 33° of bank, stick must be held to maintain the bank)
- Added VHF3 ACARS function
- Added NAV BACKUP function on RMP1 and RMP2 (this function does NOT work on the RMP3 on real ACFT as well)
- Added software RMPs
- Corrected ACP behavior on startup (transmission channels removed)
- Corrected some ND FPLN drawing issues
- IDLE indication on EWD no longer shown on ground (as on real ACFT)
- Corrected CRZ FL change on PROG page (triggered uncorrectly DES phase)
- Corrected STROB LT OFF memo logic on GND
- Corrected issue which may provoke IDG disconnet on software start
- MCDU PERF CLB page now shows the real managed speed, taking CSTRs into account
- HYD SD page now displays HYD in 50 PSI steps
- EWD and SD who decimal numbers with a smaller decimal character
- Reworked egine Anti Ice effect on ground idle
- Reversers should no longer open if no HYD power available
- OUTER TK XFR will now occur simultaneously on both sides (no longer independent)
- Oxygen REGUL LO PR will not occur straight after turning off CREW OXY pb
- ADIRS alignment time now dependent on latitude, corrected EWD memo line
- Corrected soem cases of engine start failing seemingly due to an IGN failure
- Corrected TCAS STBY memo conditions
- Corrected some bugs with remote joystick support
- Corrected WXR ACARS retrieval
- Added DDRMI flags and DDRMI logic related to ELEC and HDG sources
- Corrected DDRMI behavior in ADF mode
- Corrected DDRMI magnetic variations computations issues

[OmniAtlas]

Thank you Jean Luc for continually updating FMGS - I have followed the development for the last 4-5 years and it has grown tremendously in features in such a short amount of time.

[cmdr114b]

Great work as always Jean Luc.
I really appreciate all the work you do for all of your users.
Many thanks.
John

[romeow]

And again - merci mille fois de ma part!
René

[pete_fuss]

Hi JL,

also many thanks from my side!

Regards Peter

[Eduardo Santos]

Hi JL,
Thank you so much for your work and the great product !
Eduardo

[flykarli]

I would also like to thank you for your efforts to further improve this software package and to make it available to us.
regards Karl

[mike24]

I echo every comment that has been said and double it
Thanks again
Mike Baker

[juleiin]

Hi!

Thank you for the update. Have you added the 73AD offset concerning aircraft power state you talked me about in an other post ? Because the offset list pdf hasn't changed.

Thanks,
Julien

[Mitch95]

Hello Julien,


What list are you looking to ?


Have a look to the documentation included in the B50.1 package :
>>> Advanced User Guide chapter 6, page 17,
>>> The standalone list has been updated too…



It seems to be what you're looking for
Regards,

Michel