Results 1 to 5 of 5
-
10-25-2019, 02:56 AM #1
- Join Date
- Jan 2007
- Location
- Laupheim/Germany
- Posts
- 113
Opencockpit modules frequency problem
hello, guys,
i have in my cockpit the plug and play USB modules of opencockpits (twice radios and atc) i control it with the IOCModules v1.6Beta1 program . Yesterday I made a flight to LFMN and was asked by pro atcx to set the Approch frequency 124.18, which is not possible because it only sets 25 khz steps. Do any of you have this configuration running and could help me?
I tried it with sioc directly, but can't get any further at the moment! Thanks in advance!
regards Peter
-
10-25-2019, 04:16 AM #2
Re: Opencockpit modules frequency problem
Hi Peter, do have raised the issue to the guys from opencockpit? As is know, they working hard on supporting and i´am sure they can help. It seems that the Radiomodule needs to be set to the 3-digit set.(The freq. on the display of the radio then shows something like "124.180".
As i know there is also a setting in P3D/FSX option to use the 3-digit frequencies, that maybe needs to be set correctly. At the moment i´am using the soft RMP from Jeehell and there it shows the 3-digits.
Beste Grüße
Bernd
-
10-25-2019, 04:57 AM #3
Re: Opencockpit modules frequency problem
Peter, pls also check your setting in your Jeehell FMGS-Server setting (where it shows the SIM-version, and all FMGS apps connected in green etc.) There go into the "Aircraft options" and check if the value for "Spacing=833" is set to "yes".
-
10-25-2019, 05:04 AM #4
- Join Date
- Jan 2007
- Location
- Laupheim/Germany
- Posts
- 113
Re: Opencockpit modules frequency problem
Hello bernd,
Thanks for your answere. Yes, is set to 8.33!when I test it with the software rmp I can tune in 124.18! So I think the problem is at opencockpit. When I'll be back at home I will write to opencockpit and hope they can help! Thanks again
Regards Peter
-
10-29-2019, 06:52 AM #5
- Join Date
- Jan 2007
- Location
- Laupheim/Germany
- Posts
- 113
Re: Opencockpit modules frequency problem
Hello Bernd,
this morning came the answere fron opencockpit!
In my case i have to write my own sioc code, for example the RMP_Slave1.txt
Great support
regards Peter
-
09-24-2023, 01:12 AM #6
Re: Opencockpit modules frequency problem
Hello,
I'm new to SIOC configuration etc... so I'm coming to you to find out if a member has modified the RMP_Slave1.txt file to have the frequencies in 8.33Khz.
Thank you very much
Prettys Girls in your town
Route not displayed after ND and...