new plug and play 747 MCP and EFIS

[dnoize]

Why are the EFIS panels smaller than the MCP???

The Efis in the picture is a 737 efis in brown. Its just there to complete the picture. The units shown are preproduction versions as a sneak preview, but the retail version will have a full size 747 EFIS, we are working on the designs for the lightplate right now.

Stef

[dnoize]

Available now from both CPflight and FLYengravity, with efis unit in correct size

• Full scale replica of Boeing 747 MODE CONTROL PANEL with EICAS selector.
• Custom Engravity backlighting frontplate.
• Custom Engravity push button.
• Pushbuttons legend backlight color: white.
• Pushbuttons status color: amber.
• Backlight color: Warm white.
• Displays: Altitude, Vertical Speed, Heading, Speed
• Display characteristics: LED 7 segment. Digit height: 0,3" (7,6 mm).
• Display color: white.
• 3 digital encoders with push-on switch to set: Speed, Heading, Altitude
• Encoders characteristics: one million cycle rated, 30 increment for rotation (with detent).
• V/S Horizontal digital encoder to set Vertical Speed (30 increment for turn).
• Dual concentric HDG-SEL knobs with 6 positions BANK ANGLE limit selector (AUTO, 5, 10°, 15°, 20°, 25°).
• Toggle switches for Auto Throttle ARM switch.
• Toggle switches for Left and Right Flight Director.
• Disengage bar.
• THR, SPD, FLCH, VNAV, LNAV, HDG, V/S, HOLD, LOC, APP, CMDL, CMDC, CMDR lighting buttons
• SEL round buttons.
• Display brightness regulation.
• Backlight brightness regulation.
• Central unit for daisy-chained connection of Efis selectors (Captain and F/O)
• 16 bit Flash microcontroller.
• DIN 5 pole socket for plug&play CPflight modules interface.
• USB Interface (USB cable provided).
• Compatible with Project Magenta and PMDG. PMDG drivers are available at flightsimlabs web site.

Full scale replica of Boeing EFI747 selector.
Custom Engravity backlighting frontplate.
2 rotary encoders with push-on switch for MINS and BARO adjustment.
RADIO/BARO and IN/HPA rotary selectors with dual concentric Knobs.
Knobs: aluminium dust-coated with symbols.
2 toggle switches with three positions for VOR/ADF selection.
4 position rotary switch with push in for display mode selection.
8 position rotary switch with push in for ND range and TFC selection.
2 round pushbuttons for FPV and METER selection.
5 pole connection cable and fixing clamp provided.
Compatible with Project Magenta and PMDG. PMDG drivers are available at flightsimlabs web site.