TCAS altitude settings

[Greg Theulings]

What's the best altitude setting for PM for TCAS.
I've tried to change the .ini file of the PFD but it keeps on resetting to
0.

I think having tcas traffic 30.000 feet below is not real

Kind regards,

Greg.

[Enrico Schiratti]

> What's the best altitude setting for PM for TCAS.
> I've tried to change the .ini file of the PFD but it keeps
> on resetting to
> 0.
>
> I think having tcas traffic 30.000 feet below is not real

No, it isn't, but some enjoy it. It should certainly not
reset to 0 and I will check. The TCAS is on the operating
table in general right now.

[JAMES WEBSTER]

I have had the same probs with it resetting to 0. And Im not getting anything
from PM sounds. I had audio before build 340 BGC

James

[Michel Vandaele]

Hello,
It isn't only a matter of distance, but also if the aircraft is in a
collision course.
For exemple when both aircraft are flying level with an different of 1000 ft

(rvsm) no confict may come up in the TCAS. But when one of the aircraft is
in a collision course at 1000ft , then of course the traffic alert has to
function.

B. Rgds

Michel
"Enrico Schiratti" wrote in message
news:384358.77102@wb.onvix.com...
>> What's the best altitude setting for PM for TCAS.
>> I've tried to change the .ini file of the PFD but it keeps
>> on resetting to
>> 0.
>>
>> I think having tcas traffic 30.000 feet below is not real
>
> No, it isn't, but some enjoy it. It should certainly not
> reset to 0 and I will check. The TCAS is on the operating
> table in general right now.
>

[Enrico Schiratti]

Hi,

as I wrote, I am working on the TCAS II implementations, the
sounds will be entirely different then.

Ciao

Enrico

"JAMES WEBSTER" wrote in message
news:384372.77102@wb.onvix.com...
>I have had the same probs with it resetting to 0. And Im
>not getting anything
> from PM sounds. I had audio before build 340 BGC
>
> James
>

[Enrico Schiratti]

Fully aware of that.

"Michel Vandaele" wrote in message
news:384667.77102@wb.onvix.com...
> Hello,
> It isn't only a matter of distance, but also if the
> aircraft is in a
> collision course.
> For exemple when both aircraft are flying level with an
> different of 1000 ft
>
> (rvsm) no confict may come up in the TCAS. But when one of
> the aircraft is
> in a collision course at 1000ft , then of course the
> traffic alert has to
> function.
>
> B. Rgds
>
> Michel
> "Enrico Schiratti" wrote in message
> news:384358.77102@wb.onvix.com...
>>> What's the best altitude setting for PM for TCAS.
>>> I've tried to change the .ini file of the PFD but it
>>> keeps
>>> on resetting to
>>> 0.
>>>
>>> I think having tcas traffic 30.000 feet below is not
>>> real
>>
>> No, it isn't, but some enjoy it. It should certainly not
>> reset to 0 and I will check. The TCAS is on the operating
>> table in general right now.
>>
>

[Greg Theulings]

Problem solved by unlocking the screen.
I have noticed that more problems are related to screen position locks, but
can be solved when you first unlock the screen setting then make the changes
in the .ini file.

Regards,

Greg.

[Enrico Schiratti]

Unlocking the screen solved the TCAS altitude setting?

"Greg Theulings" wrote in message
news:385423.77102@wb.onvix.com...
> Problem solved by unlocking the screen.
> I have noticed that more problems are related to screen
> position locks, but
> can be solved when you first unlock the screen setting
> then make the changes
> in the .ini file.
>
> Regards,
>
> Greg.
>

[Greg Theulings]

it did for me