Results 1 to 10 of 11
-
05-21-2013, 02:01 PM #1
- Join Date
- Oct 2010
- Location
- sweden
- Posts
- 13
B737 Build what line of hardware ?
Hi!
Starting a 737 Build and wondering about general experience from you her @ MyCockpit.
Been looking at Flight Decks Sollutions and started of considering JetMAx but that product i made for "half Cock Pit"
so I decided to go another another way.
I can se that FSC, Flightengravity, Cockpitsonic are mentioned a lot here.
What are pro's and cons with these brands Flight Deck Sollution, DSC, FlightEngravty, Cockpitsonic and
experience in FDS-stuff in particular.
Bigone
-
05-21-2013, 02:50 PM #2
Re: B737 Build what line of hardware ?
Depends on what 737 you're building. 100/200, Classic, or NG? Then, it's a matter of The virtual aircraft you're basing the sim on. (Tinmouse, IFly, PMDG, Feelthere, etc) This is important because not all aircraft were designed with cockpit builders in mind. Tell me which 737 you're using, and I might be able to help. I'm not an incredibly experienced builder though.
EDIT: CockpitSonic is no longer existing, there is a fake one in it's place that scams you for money. Stay away from it.
-
05-21-2013, 03:12 PM #3
- Join Date
- Nov 2008
- Location
- Europe
- Posts
- 1,934
Re: B737 Build what line of hardware ?
Yourself being from Sweden it would make sense to buy from an European supplier and not from overseas as you will be paying import duties, customs and taxes etc. So please bare this in mind especially if making a valuable purchase. Engravity has an excellent reputation so this maybe worth a bite being from the Netherlands.
Alex
-
05-21-2013, 03:32 PM #4
- Join Date
- Oct 2010
- Location
- sweden
- Posts
- 13
Re: B737 Build what line of hardware ?
-
05-21-2013, 04:00 PM #5
Re: B737 Build what line of hardware ?
Ok, the first thing to know is that Project Magenta is not FULLY compatible with PMDG yet. They are working on an update. AlexJ is right in that you should probably go with engravity, as they have modular parts for a full cockpit. If your budget allows, you can find Motorized TQs, Force feedback dual Yokes, Shells, and stick shakers here:
Revolution SimProducts
-
05-21-2013, 05:57 PM #6
- Join Date
- Aug 2007
- Location
- MALLORCA
- Posts
- 2
Re: B737 Build what line of hardware ?
Or maybe you can try here: www.simujabs.com
Is a place where you can found whatever you need, yes, is a new place, but I as a designer, I've ten years of experience designing for this hobby.
In fact, I was the designer of Jetmax suite, when I did design for FDS, but now it's time to have my own place to develope, not only sell, but help to the people as well
Regards
Pedro Bibiloni.
-
05-22-2013, 02:44 AM #7
Re: B737 Build what line of hardware ?
From what I have heard interfacing the PMDG in a home build cockpit will face you with many challenges.
You should focus on an avionics suite more than an aircraft. There are different solutions. I use ProSim. The prices went up this winter, but it is very good and easy to interface. And as you already have mentioned Project Magenta. But both are not among the cheapest. And finally there is an australian company called Aerosoft (Not the German add-on company Aerosoft, this is a different one), but that suite I have not heard much about. But you could also look at iFly (Builder edition!). iFly gives you both a normal add-on 737 and whey you need for a home build and a nice looking model.
As you soon will discover (If you have not all ready done so) this is an extremely costly affair. (I mean when you can charge SEK1000 for a few pieces of painted/engraved plexiglass, you know I is going to cost you )
If you haven't already done so make i budget. Then multiply it with two and you have the amount you will end up spending.
There are many high quality suppliers in Europe, and some quite decent budget-suppliers (Like OpenCockpits). I am sure you will find many suppliers mentioned on this forum.
Cheers
PeterBest wishes, Peter
Building a B737NG - Blog: BuildABoing
-
05-22-2013, 04:54 AM #8
- Join Date
- Nov 2008
- Location
- Europe
- Posts
- 1,934
Re: B737 Build what line of hardware ?
Or maybe you can try here: www.simujabs.com
Is a place where you can found whatever you need, yes, is a new place, but I as a designer, I've ten years of experience designing for this hobby.
In fact, I was the designer of Jetmax suite, when I did design for FDS, but now it's time to have my own place to develope, not only sell, but help to the people as well
Regards
Pedro Bibiloni.
Nice to see a Palma de Mallorca builder, I know your city very well, I was there last month! I guess we can see you at Son Bonet too? A few members at my flying club have flown from there, its a great strip I hear, hope to visit in October! Great looking website and I hope it all goes well for you.
Alex
-
05-22-2013, 09:32 AM #9
- Join Date
- Aug 2007
- Location
- MALLORCA
- Posts
- 2
Re: B737 Build what line of hardware ?
Hi Alex,
Nice to see someone who likes my homeland
No, seriously, this land is frequently visited by english people, as german, italian, swedish, finish, french, and a long etc...
October?, well maybe you can write me before you come, and if is possible we could take a coffee together and talk.
Regards
Pedro Bibiloni
-
05-22-2013, 04:52 PM #10
- Join Date
- Oct 2010
- Location
- sweden
- Posts
- 13
Re: B737 Build what line of hardware ?
Revolution SimProducts
Very Cool and expensive stuff..
No products are available in the shop though ?
Big OneLast edited by bigsweede; 05-22-2013 at 04:54 PM. Reason: därför
Girls in your town
A320 Sound Files Missing