ECAM Switcher here

[OmniAtlas]

Website updated with your module Marcello.

http://flightsystem.wix.com/airbus#!resources/cisa

[OmniAtlas]

Hello All

Coincidentally I also developed Auto Brake and Landing Panel (attached to this post), for some reason the light for ON DECEL (offset 7393, byte 5) is not working.

Also I replaced the Brake Fan button with Landing gear switch (I believe the Brake Fan is not modeled)

Best Regards

Marcello Migone

Thank you Marcello! I think we are on our way to integrating JL software for use with a flat (touch) screen setup!

I have overlayed your module with JL modules onto a MIP poster as an example --

Capture.jpg

Some suggestions --

Toggle switch to remove borders (unable to resize) should be on a right click menu bar like JL software.
Looking forward to your other ? releases (gear up/down, pedestal, throttle)

Regards,

Ben

[Vonduck]

Hi Ben,

Thats great! Is it available for download mat? The touchscreen setup is also going to be the best type for me due to space and finances...

If it is, what size touch screen are you using for the above?

Cheers

Doug

[OmniAtlas]

Hi Ben,

Thats great! Is it available for download mat? The touchscreen setup is also going to be the best type for me due to space and finances...

If it is, what size touch screen are you using for the above?

Cheers

Doug

Hi Doug, not using a touch screen at the moment, but exploring using the kinect as a touch sensor - http://www.touchlesstouch.com/

You can download the A320 posters for free at http://www.jettraining.net/posters.htm and overlay JL and marcello's modules over them.

Regards,

Ben

[marcello3wd]

Thank You OmniAtlas !!

I am very happy to contribute to this project

Best regards

Marcello Migone

[marcello3wd]

Dinamically resize the panel is not easy, the buttons are actually static images (I have not found an easy way to do it with Delphi)


Another option is that I can change the size to match your panel requirement, please send me this info.

I'm working now developing an interface between my Goflight EFIS and MCP PRO to use directly with Jeehell FMGS

Best Regards

Marcello Migone

[MichaelVienna]

Hi Marcello!

Thanks for these two modules!

But I cannot get ECAMSWITCHER or AUTOLNDBRK working (connected). It displays "IPC request contains bad data" . In Starter.ini I set HardwareConnect=yes. Is anything else to to? Maybe another thing: when I installed Jeehell FMGS first, I didn't check "FSUIPC Support". So I installed it again with FSUIPC selected. I use W7 with FSX (SP1+2).

Best Regards

Michael

[marcello3wd]

Hello Michael

It seems FSUIPC connector problem

-Please reinstall FSUIPC with the latest version.
-Test with Wideclient.exe (download from FSUIPC website, remember to configure wideclient.ini)

Hope this help

Best Regards

Marcello

[MichaelVienna]

Hi Marcello!

Thanks for your help! Does that mean FSUIPC has to be installed (and registered) to use ECAMSWITCHER and AUTOLNDBRK? At the moment I've only installed FSX and Jeehell FMGS.

Best regards,

Michael

[OmniAtlas]

Hi Marcello, do you know where the window settings (.ini files?) are stored for your ECAM and AUTOBRAKE?

They've disappeared off my desktop (they appear on the desktop), and I can't rearrange them so they are visible.

Thanks.