Results 1 to 5 of 5
-
10-20-2015, 08:13 AM #1
- Join Date
- Oct 2006
- Location
- Perth, Australia
- Posts
- 263
triplehead2go & Immersive display pro problem
i'm hoping some1 has a solution to this problem.
I'm trying to setup immersive display pro then run fsx WITHOUT having to change the display settings??
Basically what is happening is I need to set projector 1 to configure immersive, I get it setup to a flyable state. I save the configuration. But then to get fsx on all 3 screens I need to change the display settings to start up on projector 2 the display works e.g blended
Now when I restart w7 the blending has gone & needs re-aligning.... I have spoken to fly-elise & from that I think the cause is the desktop display is being changed.
My question is how can I get fsx to display in all 3 projectors if I start it in projector 1? or get immersive to display in all 3 if started In projector 2?
Thanks
MichaelA320 Home Simulator LHA435
- P3dv4.5 - i7 - GTX970 - Fly Elise - ASN - Black Marble
-
10-20-2015, 11:30 AM #2
Re: triplehead2go & Immersive display pro problem
Hi Michel
i guess you need to set up the 3 beamers or screens as one screen in windows, nvidia has a special setup for that if you are using nvidia, also the matrox driver should have this setting to make on 3x1 display...
or dis i get you wrong?
Best regards
Stefan
Another question from my site, I just board 2 equal beamers and using immersive display pro too, but i spend already about 4h to set up my beamers on my 180 degrees curved screen, but it messed up and i do not get this combiend. Do you have other tutorials availabel?
BR
Stefan
-
10-20-2015, 05:50 PM #3
Re: triplehead2go & Immersive display pro problem
Have you tried the imme dive display pro auto configuration?
Soarbywire - Airbus Flight Simulation and Engineering | Jeehell FMGS - Free professional A320 avionics software for the cockpit enthusiast.
-
10-21-2015, 06:40 AM #4
- Join Date
- Oct 2006
- Location
- Perth, Australia
- Posts
- 263
Re: triplehead2go & Immersive display pro problem
As always after I post a problem I resolve the issue
Problem was the matrox manager was still showing 3 x displays where it should have been 1 !!!
Stefan I used these tutorials; (I did mine manually)
https://www.youtube.com/watch?v=wKDDAZChghs
https://www.youtube.com/watch?v=yODUWFpY6io
https://www.youtube.com/watch?v=YAQd_I76d7A (this 1 is different software but same principle)
MichaelA320 Home Simulator LHA435
- P3dv4.5 - i7 - GTX970 - Fly Elise - ASN - Black Marble
-
10-21-2015, 06:42 AM #5
- Join Date
- Oct 2006
- Location
- Perth, Australia
- Posts
- 263
Re: triplehead2go & Immersive display pro problem
A320 Home Simulator LHA435
- P3dv4.5 - i7 - GTX970 - Fly Elise - ASN - Black Marble
Prettys Womans from your city for night
A320 Sound Files Missing