SIOC and Project Magenta FMC

[Jerrymc3]

I built a B747 FMC using Hispapanels B747 FMC and Iocards USBKeys. I wired all my key switches and they're all showing up in IOCard Keys and the IOCPConsole but I can't get them to work with the Project Magenta FMC. I followed the instructions in the USBKeys Manual identifying the card, USBKeys file and assigning my keys in sioc.ini. I have FSX, Project Magenta, IoCard Keys and WideFS all running but my FMC keys aren't being recognized by the PM FMC. I don't know what I'm missing.


[ fichero de configuracion para el SIOC ver. 4.3 ]
[ Configuration file for SIOC ]


[************** SIOC ***************]

[ Nombre asignado al SIOC ]
[ SIOC name ]
Name=Main

[ Puerto del servidor IOCP ]
[ IOCP port ]
IOCP_port=8092

[ Tiempo de respuesta máximo de los paquetes IOCP ]
[ IOCP Timeout ]
IOCP_timeout=4000

[ Arranque minimizado en la barra ]
[ Start minimized in tray ]
Minimized=No

[ Retraso necesario para las variables toggles (Project Magenta)]
[ Deley needed for var. toggles (Project Magenta) ]
toggle_delay=20

[ Fichero de configuracion ]
[ Configuration File ]
CONFIG_FILE=.\USBKEYS.ssi

[************** MONITOR MODULE ***************]

[ Desabilitar monitorizacion remota del SIOC ]
[ Remote monitor disable mode yes/no ]
Monitor_disable=No

[ Refresco broadcast monitor (en segundos) ]
[ Broadcast monitor time (seconds) ]
Monitor_time=2


[************** IOCARDS MODULE ***************]

[ Desactivar el módulo de las IOCards ]
[ Disable IOCards module ]
IOCard_disable=No

[ Divisor de frecuencia para los ejes analogicos (1-999). Retarda la entrega de valores. ]
[ Frequency divisor for delay the analogic axes. (1-999)]
Divisor_AD=10

[------------- CARDS CONFIG -------------]

[ IOCard Master ]
[...............]

[ Spanish : ]

[ MASTER=(Indice device),(Tipo),(Número de tarjetas),(Número device) ]

[ Indice Device: Índice usado en la variable SIOC como device, para indicar a que tarjeta se hace referencia ]
[ Se usa 0 en el caso de que sólo haya una tarjeta y no se tenga en cuenta el número de device, por defecto un script en SIOC cuando no se pone parámetro DEVICE, se hace referencia al índice 0]

[ tipo = 0 : Emulador de Master Card // OBSOLETO ]
[ tipo = 1 : Tarjeta Master conectada al puerto paralelo directamente // OBSOLETO ]
[ tipo = 2 : Tarjeta Master conectada al puerto paralelo mediante cable de compatibilidad // OBSOLETO ]
[ tipo = 3 : Placa de expansión por puerto paralelo // OBSOLETO ]
[ tipo = 4 : Tarjeta USBExpansion usada ]
[ tipo = 5 : Modulo MCP de Opencockpits ]
[ tipo = 6 : Tarjeta USBOutputs ]
[ tipo = 7 : Modulo EFIS de Opencockpits ]
[ tipo = 8 : Modulo Radio COM de Opencockpits ]
[ tipo = 9 : Modulo Radio NAV de Opencockpits ]
[ tipo = 10 : Modulo Radio ADF de Opencockpits ]
[ tipo = 11 : Modulo Radio ATC de Opencockpits ]
[ tipo = 12 : Modulo Radio Airbus RMP de Opencockpits ]
[ tipo = 13 : Modulo FMC-737 de Opencockpits ]
[ tipo = 14 : Tarjeta USBDcmotorPLUS ]
[ tipo = 15 : Modulo MCP V3 de Opencockpits ]


[ Número de tarjetas = Número de placas Master usadas, 1 a 4 para uso de placas de expansión, 1 para conexión de placa Master directa o del Emulador ]

[ Número de device = 0 en el caso del Emulador o primera tarjeta USB detectada, Dirección del puerto paralelo (por ejemplo $037, o número de dispositivo USB ]


[ Un ejemplo de 2 USBExpansion conectadas con 3 y 2 placas Master ]
[ MASTER=0,4,3,22 ]
[ MASTER=1,4,2,24 ]

[ Un ejemplo de conexión a simulador ]
[ MASTER=0,0,1,0 ]


[ English : ]

[ MASTER=(Device index),(Type),(Number of cards),(Device number) ]

[ Device index : Index used in SIOC variable like device, this is the card used for SIOC sentence ]
[ Use 0 for only one card, for this value you not need specify Device number. If you not use DEVICE parameter in a definition in SIOC script, the default index used is 0]

[ type = 0 : Master Card Emulator // OBSOLETE ]
[ type = 1 : Master Card connected directly to parallel port // OBSOLETE ]
[ type = 2 : Master Card connected throught compatibility cable to parallel port //OBSOLETE]
[ type = 3 : Expansion Card connected throught parallel port //OBSOLETE ]
[ type = 4 : USBExpansion Card used ]
[ type = 5 : Opencockpits MCP module ]
[ type = 6 : USBOutputs Card used ]
[ type = 7 : EFIS module ]
[ type = 8 : Radio COM module ]
[ type = 9 : Radio NAV module ]
[ type = 10 : Radio ADF module ]
[ type = 11 : Radio ATC module ]
[ type = 12 : Radio RMP Airbus module ]
[ type = 13 : FMC-737 module ]
[ type = 14 : USBDCmotorPLUS Card used ]
[ type = 15 : MCP V3 module ]

[ Number of Cards = Master cards connecteds, 1 to 4 for expansion cards, 1 for a Master card directly connected or Emulator ]

[ Number of device = 0 for Emulator or first USB card detected, parallel port address, device number for specifies USBexpansion card ]

[ For example, two USBExpansion cards connected with 3 and 2 Master cards used ]
[ MASTER=0,4,3,22 ]
[ MASTER=1,4,2,24 ]

[ For example, use of Master card emulator ]
[ MASTER=0,0,1,0 ]

[ Use the first USBExpansion card connected with only one Master Card attached ]
[ Esta definición es para usar la primera tarjeta USBExpansion que se encuentre instalada que además llevará conectada una placa Master ]

[MASTER=3,6,1,252]
[MASTER=0,4,1,0]
[MASTER=0,12,1,0]


[ Others Cards / Otras tarjetas ]
[...............................]

[ Spanish : ]

[ Nombre_de_tarjeta=(Indice device),(Número device) ]

[ Indice Device: Índice usado en la variable SIOC como device, para indicar a que tarjeta se hace referencia ]
[ Se usa 0 en el caso de que sólo haya una tarjeta y no se tenga en cuenta el número de device, por defecto un script en SIOC cuando no se pone parámetro DEVICE, se hace referencia al índice 0]

[ Número de device = 0 para usar primera tarjeta USB de este tipo detectada ó número de dispositivo USB ]


[ English : ]

[ Name_of_card=(Device index),(Device number) ]

[ Device index : Index used in SIOC variable like device, this is the card used for SIOC sentence ]
[ Use 0 for only one card, for this value you not need specify Device number. If you not use DEVICE parameter in a definition in SIOC script, the default index used is 0]

[ Number of device = 0 for first USB card of this type detected, or device number for a specifies device ]

[ Ejemplo de dos USBServos en indices 0 y 1, y números de devices 17 y 23 ]
[ Example of two USBServos for index 0 and 1, and device number 17 and 23 ]

[ USBServos=0,17 ]
[ USBServos=1,23 ]

USBKeys=4,16


[ Para los ejes analógicos se usan los números de devices de las tarjetas donde están alojados ]
[ For analogic axles, you use the device number of cards what allow the axles ]


[************** FSUIPC MODULE ***************]

[ Desabilitar lectura de las FSUIPC ]
[ FSUIPC disable mode yes/no ]
FSUipcdisable=No

[ Refresco recepción FSUIPC ]
[ FSUIPC refresh ]
FSUipcRefresh=50


[************** IOCP CLIENTS MODULES ***************]

[ Retraso para inicializacion una vez conectado el cliente en milisegundos ]
[ Delay for initialization when client has been connected in mseconds ]
IOCPini_delay=3000

[************** IOCP CLIENT MODULE #0 ***************]

[ Desactivar el módulo cliente IOCP ]
[ Disable IOCP client module ]
IOCPclient0_disable=No

[ IP del servidor donde debe de conectar el cliente ]
[ IOCP client host name ]
IOCPclient0_host=localhost

[ Puerto de envio del protocolo IOCP cliente ]
[ IOCP client port ]
IOCPclient0_port=8099


[************** IOCP CLIENT MODULE #1 ***************]

[ Desactivar el módulo cliente IOCP ]
[ Disable IOCP client module ]
IOCPclient1_disable=Yes

[ IP del servidor donde debe de conectar el cliente ]
[ IOCP client host name ]
IOCPclient1_host=localhost

[ Puerto de envio del protocolo IOCP cliente ]
[ IOCP client port ]
IOCPclient1_port=8099


[************** SOUND MODULE ***************]

[ Ficheros de sonido ]
[ Sound Files ]

[ Desactivar el módulo de sonido ]
[ Disable Sound module ]
Sound_disable=yes

[ Volumen general de los sonidos 0-100 ]
[ Master Volume 0-100 ]
Volume=100


[ put '*' first filename for loop Sound ]
[ anteponer '*' en el fichero para bucle continuo de sonido]

[ Sound=wav_file,frequency,volume,pan ]
[ frequency=100 to 100000 0=original -1=current ]
[ volume=0 to 100, -1=current ]
[ pan=-100 (left) to +100 (right) 0=center -1=current ]

[ Sound=Fichero_wav,frecuencia,volumen,balance ]
[ frecuencia=100 hasta 100000 0=original -1=Por defecto ]
[ volumen=0 hasta 100 -1=Volumen por defecto ]
[ balance=-100 (Izquierda) hasta +100 (Derecha) 0=centro -1=Por defecto ]

[ #1 ]
Sound=APDis.wav,-1,-1,-1

[ #2 ]
Sound=*outermk.wav,-1,-1,-1

[ #3 ]
Sound=*hello.wav


[************** KEYBOARD EMULATOR MODULE ***************]

[ Nombre exacto de la ventana donde se enviarán las teclas ]
[ Name of window for key send ]
[window = "Project Magenta Glass Cockpit - Build 396" ]

window = "Project Magenta CDU - Build 506" // - Bloc de notas


[ Asignación de teclas ]
[ assign your keys ]

#1=K
#2=M
#3=/2 // NUM 2
#4=N
#5=/1 // NUM 1
#6=O
#7=L
#8=/3 // NUM 3
#9=Z
#10=\Z
#11=/0 // NUM 0
#12=\\
#13=
#14=\A
#15=SP
#16=
#17=\I // F5 Line 5L
#18=\G // F3 Line 3L
#19=\3\F // CTRL-F2 RTE
#20=\F // F2 Line 2L
#21=\3\E // CTRL-F1 INT/REF
#22=
#23=\H // F4 Line 4L
#24=\J // F6 Line 6L
#25=\3\L // CTRL-F8 HOLD
#26=\3\M // CTRL-F9 FMC COM
#27=\3\K // CTRL-F7 LEGS
#28=\3\H // CTRL-F4 CRZ/ATC
#29=\3\J // CTRL-F6 FIX
#30=
#31=\3\N // CTRL-F10 PROG
#32=\3\G // CTRL-F3 DEP/ARR
#33=G
#34=I
#35=\X // PgDn NEXT PAGE
#36=U
#37=\W // PgUp PREV PAGE
#38=J
#39=H
#40=F
#41=P
#42=R
#43=/5 // NUM 5
#44=S
#45=/4 // NUM 4
#46=T
#47=Q
#48=/6 // NUM 6
#49=\M // F9 Line 3R
#50=\K // F7 Line 1R
#51=\O // F11 Line 5R
#52=Z
#53=\P // F12 Line 6R
#54=\Z // Delete DEL
#55=\L // F8 Line 2R
#56=\N // F10 Line 4R
#57=B
#58=D
#59=\3\P // CTRL-F12 NAV/RAD
#60=\C
#61=\3\0 // CTRL-F11 MENU
#62=E
#63=C
#64=A
#65=
#66=
#67=
#68=
#69=
#70=
#71=
#72=
#73=U
#74=W
#75=/8 // NUM 8
#76=X
#77=/7 // NUM 7
#78=Y
#79=V
#80=/9 // NUM 9
#81=
#82=
#83=
#84=
#85=
#86=
#87=
#88=

[ End of File ]

[Jerrymc3]

It took several emails to Open Cockpits support but I finally solved the problem. I was defining my Device as Device=16 rather than (IDX) Device=4 in my USBKeys script. All is working fine now.

jerry