Company Route Editor 4 JeeHell FMGS

[capt_pero]

First make sure that your path setting ends in .\A320FMGS\navdata\

Second make sure that you have read/write permission from your computer to the remote computer. Okay?

Thierd make sure that FMGS is not running. Could be that another process has that file open.

Hope that helps.

[cmdr114b]

Here is my config, it looks OK to me unless you can tel me its not.
I do not have FMGS running as I do all my planning on the Instructor station PC and I have a dedicated PC to run the FMGS server
which is not running while I am doing this.


Thanks
John

[capt_pero]

Path to Level-D navdata needs to point to "LEVEL D 767" navdata as described in the manual. You are pointing to JeeHell directory which not work accept your LEVEL D navdata is stored there?! Please download the manual read chapter 5.
http://aviation.pero-online.de/wordpress/?page_id=1725

Next would be checking write access to this folder: \\A320-07\a320fmgs\navdata\
Can you modify the \\A320-07\a320fmgs\navdata\navdata1\corte.xml file? Your path setting looks right.

Regards,
Peter

[capt_pero]

New version 0.5.4 is ready to download. With this version and FMGS B49.1 the corte.xml can be forced to be reloaded with FMGS Server / WideFS running. Please read manual chapter 9 before using it.

@Jean Luc: Thank you for implementation.

[capt_pero]

I just updated corteManager4JH to version 0.6 and put it to ReleaseCandidate status because a lot of tests has been done (and a lot of improvements). Thanks to Peter Fuss, René and Dieter.

Please find v0.6 on my server: http://aviation.pero-online.de/corteManager4JH/

Manual and ReleaseNotes have been updated as well. :O)

[capt_pero]

I just updated corteManager4JH to version 0.7. Sorry there are still some new ideas by using it myself.
Latest change is the validation of the JeeHell FMGS and the used LEVEL-D AIRAC. They should have the same Cycle.

If you've used the "Don't save" setting please set it again to "DEPARTURE" or "ARRIVAL". This logic has been changed.

Please find v0.7 on my server: http://aviation.pero-online.de/corteManager4JH/

Manual and ReleaseNotes have been updated as well. :O)

[Miatanet]

Hi Peter

I have installed the needed Airac from Aerosoft, but it does not recognize the versions as it should: both are the same. Have you seen that before.





Best regrds
Stefan

[capt_pero]

Can you please post your "cycle_info.txt". Looks like Aerosoft is using another format. I can change that very quick.

[capt_pero]

Okay. Fixed it myself. Check out 0.7.1

[Miatanet]

Hi Peter

Aerosoft NavDataPro


AIRAC cycle : 1801
Revision : 1
Valid (from/to): 04/JAN/2018 - 31/JAN/2018


Diese Navigationsdaten dürfen ausschließlich für die Flugsimulation verwendet werden und weichen von den aktuellen Navigationsdaten ab!
Benutzen Sie diese Navigationsdaten in keinem Fall für die Navigation in der realen Luftfahrt!
These navdata are intended for flight simulation use only and will vary from current aeronautical navdata!
Do not use for real navigation!


Diese Navigationsdaten, die Software und sonstiges zugehöriges Material sind durch Urheberrechtsgesetze geschützt. Die Navigationsdaten und die Software werden lizenziert, nicht verkauft.
Sie dürfen eine Kopie der Navigationsdaten und der Software auf einem Computer für Ihre persönliche, nicht kommerzielle Nutzung installieren und verwenden.
Die Navigationsdaten, die Software und alle anderen zugehörigen Materialien dürfen ohne vorherige, schriftliche Erlaubnis der Aerosoft GmbH
weder kopiert, fotokopiert, übersetzt, zurückentwickelt, dekompiliert, diassembliert oder in anderer Form für elektronische Maschinen lesbar gemacht werden.


These navdata, the software and all the related materials are protected by copyright laws. The navdata and the software is licensed, not sold.
You may install and run one copy of the navdata and the software on one computer for your personal, non-commercial use.
The navdata, the software and all related materials must not be copied, photocopied, translated, reverse engineered, decompiled or reduced to any electronic medium
or machine legible form, neither completely nor in part, without the previous written permission of AEROSOFT GmbH.


© Copyright Aerosoft GmbH, alle Rechte vorbehalten, all rights reserved.


website: www.aerosoft.com
support: http://forum.aerosoft.com/


BR
Stefan