Results 1 to 10 of 10
Thread: G'day
-
07-14-2007, 07:47 PM #1
- Join Date
- Jul 2007
- Location
- Melbourne Australia
- Posts
- 5
G'day
Hello all, this is my first post. I have recently retired and now look forward to pursuing the hobby of flight sim and cockpit building. I have a PPL but have not flown for several years thus the interest in flight simulation. After looking at some of the photo's it absolutely blew me away as I really only want to build a small GA cockpit.
Regards
Chris
-
07-14-2007, 09:38 PM #2
Chris
Before settling for "a small GA cockpit" may be you could try some heavier metal...may be a big twin...with turbines...or a small jet...or a big jet...
Just to say that simulation allows you to go a step further than what you already master....
Think about it
Anyway..welcome here, we are all ears, ready to help, whatever your choice.
Cheers
JackJackpilot
B737-700 Posky
FS9/P.Magenta
without PMSystem
-
07-14-2007, 10:03 PM #3
G'day mate, welcome to MyCockpit, it's always good to see the aussie crew increasing!
Gwyn
737NG using Prosim737, Immersive Calibration Pro, Aerosim Solutions motorized TQ & cockpit hardware, CP Flight MCP & FDS SYS1X, SYS2X & SYS4X, FDS PRO FMCs, AFDS units & Glarewings, Matrix Orbital ELEC display, Pokeys Landing & Cruise alt display, Buttkicker Gamers, 3 x BenqMW811ST projectors with a Matrox Th2Go
http://www.aerosimsolutions.com.au
Supporter of MyCockpit.org, please join me in donating!!!
-
07-14-2007, 10:17 PM #4
- Join Date
- Jul 2007
- Location
- Melbourne Australia
- Posts
- 5
Thank's for the welcome Gwyn, it was actually reading a few of your articles that has set me on this path. I am amazed at what you have achieved although looking through the forums and photo's you are certainly not alone.
Chris
-
07-14-2007, 10:19 PM #5
- Join Date
- Jul 2007
- Location
- Melbourne Australia
- Posts
- 5
Thank's Jack. I shall give it some thought but I shall have to really brush up on my FS skills before tackling the 'heavies'
Chris
-
07-14-2007, 11:11 PM #6
Cheers mate, I too was flying for real but the expense of it dried up the fun. I built the sim to replace real flying and it certainly does the trick. Whatever you decide to build Airliner or GA the help is here. 737 is probably the easiest to do due to off the shelf parts availability but the GA stuff is getting pretty good too. Hard choice I imagine!
Gwyn
737NG using Prosim737, Immersive Calibration Pro, Aerosim Solutions motorized TQ & cockpit hardware, CP Flight MCP & FDS SYS1X, SYS2X & SYS4X, FDS PRO FMCs, AFDS units & Glarewings, Matrix Orbital ELEC display, Pokeys Landing & Cruise alt display, Buttkicker Gamers, 3 x BenqMW811ST projectors with a Matrox Th2Go
http://www.aerosimsolutions.com.au
Supporter of MyCockpit.org, please join me in donating!!!
-
07-15-2007, 10:07 AM #7
Welcome to Mycockpit.org Chris
You must be so excited. Retirement is a great time in life. I only have like 25-30 years left (60 years if I keep spending money on the sim) I am envious, because retired life will give you all the time you need to relax and build the Sim you want at your own pace.
Please know that although some of these Sims you see are advanced, It didn't take to much to get them to where they are. Do not be discouraged by any roadblocks you may encounter along the way. We are all here to help you along the road of the unknown. Chances are most of us have seen it, Done it, and experienced it.
Please ask as many questions as you like, and lets help you to your goal of the GA Aircraft.
Then we can swing you over to the Heavy Metal and convince you to start over again
Best regards and welcome again from all of us here at Mycockpit.org.
Trev________________________
Trevor Hale
-
07-15-2007, 12:47 PM #8
Hi Chris and welcome to the site.
Build whatever you like that you're interested in. As one of my flight instructors used to tell me, "flying is flying no matter what you're flying".
Everytime I used to go to the airport and look at the heavy metal I'd remember this phrase.
Now if you're REALLY crazy, build a 727 simulator.
Cheers!Boeing Skunk Works
Remember...140, 250, and REALLY FAST!
We don't need no stinkin' ETOPS!
Powered by FS9 & BOEING
-
07-16-2007, 08:30 AM #9
- Join Date
- Jul 2007
- Location
- Melbourne Australia
- Posts
- 5
Holiday first
Thanks for the words of encouragement guys. I shall be taking a small break up to North Queensland and the Gulf country for a couple of months and when I get back I shall settle down and be the old fart that I'm supposed to be and get into some pit building. Should be a very exciting time setting up the sim.
Rgds
Chris
-
07-17-2007, 01:19 PM #10
Welcome Chris. You have picked a good hobby. And don't listen to all these airliner types...what do they know. fly what you like...a real airplane...(whispers, fighters, fly fighters)
John
System:
ASUS P5Q SE/R
Intel Q9550 O/C to 3.4 GHz
4 GB 1066 DDR2 RAM
300 GB WD 10,000 RPM Raptor SATA Drive
GeForce 8800 GT 512 KB RAM
Matrox TH2Go with three 19" Sumsung 940 BX
IR Track 4
Similar Threads
-
G'day all by a newbee
By ph-yos in forum Welcome to MyCockpit New here? Introduce Yourself!Replies: 3Last Post: 05-14-2009, 04:57 PM -
G'day from Perth Western Aust
By kawaboy in forum Welcome to MyCockpit New here? Introduce Yourself!Replies: 4Last Post: 03-03-2009, 08:48 PM -
G'day from Canada
By Spetz in forum Welcome to MyCockpit New here? Introduce Yourself!Replies: 8Last Post: 10-28-2008, 01:55 PM -
G'Day! A Cessna 310L for Melbourne Australia
By rjfon1 in forum Welcome to MyCockpit New here? Introduce Yourself!Replies: 2Last Post: 10-22-2008, 07:01 PM -
G'Day
By tasmanet in forum Welcome to MyCockpit New here? Introduce Yourself!Replies: 2Last Post: 02-27-2008, 12:26 AM
Explore Local Dating Opportunities in Your Town Super Сasual Dating https://datingnow.site
P3D V4 FMGS B47 Aircraft issue