NEW latest default 737 logic file

[Thomas Richter]

Hi Thomas,

One more thing that i don't know if is a problem of the using PMDG... i don't have - ExternPowerAvailable in any condition neither with " Parkbrake=SET+Engines=OFF+Beacon=OFF "

Backlight solved !!!

Corrected!

[Peter Nielsen]

Ahmm.. I have a problem with the new files Thomas uploaded.

The CDU!!!! does not work...

For some weird reason with these new PM system files the CDU will only allow me to press Menu and then the screen goes black. tried it with and without hardware (ie the old CDU software programme) but also this one shows a black screen.

Choose a different and older 737file and wow! the CDU came alive..?

What am i missing here?

Peter

[Thomas Richter]

Ahmm.. I have a problem with the new files Thomas uploaded.

The CDU!!!! does not work...

For some weird reason with these new PM system files the CDU will only allow me to press Menu and then the screen goes black. tried it with and without hardware (ie the old CDU software programme) but also this one shows a black screen.

Choose a different and older 737file and wow! the CDU came alive..?

What am i missing here?

Peter

Depends of slower systems, is corrected.

[Peter Nielsen]

Depends of slower systems, is corrected.

Sorry Thomas, what do you mean by that?

That the new files will not work on slower systems? or that the problem i describe above has now been corrected to make it work on slower systems?

if so corrected where??

And yes, my PC running the CDU is the oldest and slowest of them all, an old PII 450mhz..

[Thomas Richter]

Sorry Thomas, what do you mean by that?

That the new files will not work on slower systems? or that the problem i describe above has now been corrected to make it work on slower systems?

if so corrected where??

And yes, my PC running the CDU is the oldest and slowest of them all, an old PII 450mhz..

It is not a CDU problem, it is corrected in pmSystems 737 logic file.

[Olympic260]

The lights now working OK thank you

One more question, can you confirm that the Presurasation is not yet modeled? The dif presure guage goes round round and the cabin alt is always 0. Also the 6 LED at the pack panel are not shown even at the light test

[Thomas Richter]

I don't know the code that is behind the panel internally Enrico did, but in any case I would say it has now not a high priority of things to do.

The six Leds don't have an defined Offsets, so they cannot lit.

[Jan Pemöller]

Hi Thomas,

I found some small bugs on your sixpack code.
Check the picture for system annunciators and related amber lights on the real sixpack / warning system.

example: "PackFail" shows on sixpack "Air Cond" and not "Overhead"

Best regards
Jan

[Jan Pemöller]

and ...
this is missing:
if mastercautionswitch then
sixpackcaution = 0
mastercautionswitch = 0
endif

= all lights has to extinguishes (reseting the system)

Pushing either annunciator test all lights and recalls the faults!
This takes just a second an not 9 seconds ...

Best regards
Jan

[carlos hermida]

Hi Thomas,

Using the lastest file i can't start engines again using PMDG and don't have external power yet