(A/P-P/RST),(A/T-P/RST),(FMC-P/RST) Offset

[zirakonium]

Hi.

I am using Project Magenta, Boing software..

I having trouble finding (A/P-P/RST),(A/T-P/RST),(FMC-P/RST) Offset's
for both switch function and annonciator light,(backlight)

I have run through pmsysvar.txt and ProjectMagenta Fsuipc offset's,
but with no luck....

Can anyone help with these offsets????


Regards John Hansen, Denmark

[kevinE]

Hi john
I was about to ask the same thing and is this option on the flightdeck technology software and if so were is it ?

[zirakonium]

Hi KevinE

I've got reply from ProjectMagenta, about this subject,
and there is no offsets for this funktion. You have to
program it your self...I have already made a script in
SIOC ( opencockpits )... So if you are using Opencockpits
hardware i can provide you with my ssi. script.( PROGRAM )
It is not finnist yet but it is working....
All the offsets to make this logic function work is advailerble in
FSUIPC and Project magenta....


Best regards John Hansen

[Olympic260]

John I would be interesting to see this code, since I am using SIOC this will help a lot...

[jberinge]

Good timing. I am also wiring up my MIP and use opencockpits code. If you could post it I would be most appreciative.
Thanks
Jason

[zirakonium]

Hi

My sioc code is a beta, but working. Second...it is not a total
replica of the real logics but it's quite simple to modifi at your own
will. I have used Project Magenta's video called "Cockpit Test" to
compair with...In real read the Continental Boing 737 manual ( at this site)
to get the correct function. Sioc programming is quite new for me so
i challenge ny self with this little program incorporating a flash generator
for the Master Caution....
The function is simple : disconnect A/P and you get a flashing Master Caution
and i light in A/P P/RST sw. Push Master sw to reset Master Caution and push
A/P P/RST sw to reset that. Disconnection A/T will only get light in A/T P/RST
sw, push to reset..Thats it for now..I will find out next when FMC P/RST will
annonciate. Send a email to dsl325961@vip.cybercity, i'll send the ssi. code
to you of interrest.... Best regards John Hansen, Denmark

[jberinge]

Hi John,
Your email address bounced. It would be great if you could send it to jason.beringer@arts.monash.edu.au If I modify it I will post it back to you
Thanks
Jason

[zirakonium]

hi and sorry....

I can see my full email adresse is missing...

It is----- dsl325961@vip.cybercity.dk


Regards John Hansen

[dcutugno]

More simple, why don't post the code here?
I did this in the past posting my SIOC codes.

[zirakonium]

Hi here it is

RGD John Hansen, Denmark



// *****************************************************************************
// * Config_SIOC ver 3.5 - By Manolo Vélez - www.opencockpits.com
// *****************************************************************************
// * FileName : WithoutFlash&MasterReset.txt
// * Date : 08-02-2008



Var 0000, Value 0 // AutoDisconnectPanel

Var 0001 // disconnect flag pm
{
IF V0001 = 1
{
IF V0006 = 1
{
V0008 = 1
}
}
IF V0001 = 1
{
IF V0007 = 1
{
V0009 = 1
}
}
IF V0001 = 0
{
V0006 = 0
V0007 = 0
}
}

Var 0002 // A/P from 04F2 bit 0
{
V0003 = DELAY V0002 ,10
IF V0002 < V0003
{
V0006 = 1
}
ELSE
{
V0006 = 0
}
}

Var 0003 // delay A/P calc

Var 0004 // A/T from 04F2 bit 11
{
V0005 = DELAY V0004 ,10
IF V0004 < V0005
{
V0007 = 1
}
ELSE
{
V0007 = 0
}
}

Var 0005 // delay A/T calc

Var 0006 // A/P disconnect flag
{
IF V0001 = 1
{
IF V0006 = 1
{
V0008 = 1
}
}
}

Var 0007 // A/T disconnect flag
{
IF V0001 = 1
{
IF V0007 = 1
{
V0009 = 1
}
}
}

Var 0008, Link IOCARD_OUT, Output 12 // A/P disconnect led

Var 0009, Link IOCARD_OUT, Output 13 // A/T disconnect led

Var 0010, Link IOCARD_SW, Input 1 // A/P reset sw
{
V0008 = TOGGLE 0
V0014 = TOGGLE 0
}

Var 0011, Link IOCARD_SW, Input 2 // A/T reset sw
{
V0009 = TOGGLE 0
V0014 = TOGGLE 0
}

Var 0012, Link FSUIPC_IN, Offset $04FE, Length 2 // PM flag
{
V0001 = TESTBIT V0012 ,2
}

Var 0013, Link FSUIPC_IN, Offset $04F0, Length 2 // PM A/P & A/T read
{
V0002 = TESTBIT V0013 ,0
V0004 = TESTBIT V0013 ,11
}

Var 0014, Link FSUIPC_OUT, Offset $56F8, Length 2 // Master reset write

Var 0016, Link FSUIPC_OUT, Offset $050A, Length 2 // disconnect main sw