Results 1 to 5 of 5
Thread: Problems with CPFlight-EFIS
-
07-23-2008, 05:46 AM #1
- Join Date
- Jun 2008
- Location
- Germany
- Posts
- 6
Problems with CPFlight-EFIS
Dear cockpit-builder-community,
I´m a new member in this forum and at first i want to say hello from Germany!
Perhaps someone can help me with the following problem: It seems that my new CPFlight-EFIS doesn´t work in combination with Goflight-modules (???).
This is my actual installation:
Server: FS2004, default-737, some Goflight-modules with the last driver- and configuration-software.
Client: Project Magenta 737 (glas-cockpit, MCP, CDU), CPFlight-hardware (MCP737/USB + EFIS) with actual drivers.
FSUIPC (V3.81) and WideFS (V6.51)
And this is my problem:
If I only run PM with the CPFlight-hardware (on the client), all things work fine. But if I use my Goflight-modules additionally (on the server), the CPFlight-EFIS fails completely, my CPFlight-MCP however works properly furthermore.
There are no other problems with my hardware- or software-installation.
Many thanks for good ideas!
Best regards
Rainer Jung
-
07-23-2008, 08:18 AM #2
Hi Rainer, and Welcome to Mycockpit.
It appears you have a conflict somewhere. What functions if any work on the EFIS module when the goflight hardware is connected? Does nothing on the EFIS work at all?
I would suggest that you should contact CPFlight regarding this issue, seems to me this is very obscure, and shouldn't be happening.
Trev________________________
Trevor Hale
-
Post Thanks / Like - 1 Thanks, 0 Likes, 0 Dislikesrahaewju thanked for this post
-
07-23-2008, 08:49 AM #3
- Join Date
- Jun 2008
- Location
- Germany
- Posts
- 6
Hello Trev,
thank you for answering. The EFIS knobs and switches freeze if i use PM+CPFlight-hardeware+Goflight-modules together in the network. After then the electronic of the EFIS is totally "confused" so i have do make a cold restart of the client pc.
I sent my question to the CPFlight tech support, too. If i know any news, i will post again.
Best Regards
Rainer
-
07-28-2008, 02:58 PM #4
- Join Date
- Jun 2008
- Location
- Germany
- Posts
- 6
Hello together,
my problem is solved after updating the firmware of the CPFlight-MCP.
Best regards
Rainer Jung
-
07-28-2008, 03:00 PM #5
Fantastic.
thanks for updating us. You had me stumped.. Trev________________________
Trevor Hale
Similar Threads
-
Would CPflight MCP & dual EFIS fit into any MIP ?
By Nick1150 in forum General Builder Questions All Aircraft TypesReplies: 2Last Post: 03-20-2010, 10:05 AM -
CPFlight MCP & EFIS For Sale
By Declan Green in forum PM General Q & AReplies: 5Last Post: 12-07-2004, 09:52 PM
Explore Local Dating Opportunities in Your Town Super Ğ¡asual Dating https://datingnow.site
P3D V4 FMGS B47 Aircraft issue