Results 1 to 8 of 8

Thread: CNC/Gcode

  1. #1
    150+ Forum Groupie riche543's Avatar
    Join Date
    May 2008
    Location
    Sydney Australia
    Posts
    248
    Contribute If you enjoy reading the
    content here, click the below
    image to support MyCockpit site.
    Click Here To Contribute To Our Site

    CNC/Gcode

    Hi all, I have Finally finished building my CNC machine , Still lots to learn about though, Does anyone have cad or Gcode files for 737 panels , I am using Mach3 for my machine software, Thanks guys ....

  2. #2
    300+ Forum Addict autocadplease's Avatar
    Join Date
    Jan 2008
    Location
    British Columbia, Canada
    Posts
    446
    Contribute If you enjoy reading the
    content here, click the below
    image to support MyCockpit site.
    Click Here To Contribute To Our Site

    Download my 737 CAD file (DXF format) in the download section (I just uploaded it - so it might take a day to get approved). Then just open it in LazyCam make some toolpaths and post a G-code. You will only need the freeware Lazycam version to do this.
    Grant D.
    Nelson,B.C. Canada
    Win7 32bit, FSX, PM Boeing, TH2GO, GEX, VoxATC

  3. #3
    150+ Forum Groupie riche543's Avatar
    Join Date
    May 2008
    Location
    Sydney Australia
    Posts
    248
    Contribute If you enjoy reading the
    content here, click the below
    image to support MyCockpit site.
    Click Here To Contribute To Our Site

    Thankyou for your fast reply , I have downloaded those files , Am i right in saying they are only the cuts & not the Engraving of the letters? Im still very new to the CNC Hobby world, Finding it a bit hard to learn Everything About the process but going slow with it, anyway thanks again ....

  4. #4
    150+ Forum Groupie
    Join Date
    Sep 2006
    Location
    Netherlands
    Posts
    165
    Contribute If you enjoy reading the
    content here, click the below
    image to support MyCockpit site.
    Click Here To Contribute To Our Site

    Mini-Tutorial: Letters in AutoCad preparing for CNC engraving

    Letters in AutoCad preparing for CNC engraving:

    1. Make text with font and height of your choise.

    2. Choose from menu: Express tools - Text - Explode text and select your text - Enter.

    3. Type explode - Select text again - Enter.

    4. Delete now the wrong lines in the letters (selecting from right below to left up goes fastest, because all the wrong lines are double).

    5. Save as dxf.

    Now you've double line text which can be used by your toolpath generator.

    Hessel Oosten
    767 Level-D

  5. #5
    150+ Forum Groupie
    Join Date
    May 2006
    Location
    london england
    Posts
    177
    Contribute If you enjoy reading the
    content here, click the below
    image to support MyCockpit site.
    Click Here To Contribute To Our Site

    Thumbs up CNC to G code

    Hi Guys i am also at the same stage you have reached , i have built a small machine as a training tool if you like which is able to do PCB's and small Panels ( Radios ,Nav Etc ) basically i was after Cad drawings for Radio panels suitable for GA type aircraft , and came across this post, Am doing the rounds of Demo CAM programs at the moment and have looked at CAMBAM , LAZYCAM, D2NC,ETC others are way way way out o my budget range to be Run through MACH3. With regards to your 737NG cad drawing would i be right in saying that i would have to sellect the Panel area i need to Generate G Code For and Erase the Rest of the Main Drawing temporarally . Then save as DXF or R12 DWG format then import that file into the CAM package of Choice ?.. Please correct me if im doing this the hard way .. Hi "autocadplease" i Missed getting your proper name off the post LOL what was your impression of lazycam for producing 2.5D profiles.. am getting to the point where i will have to commit to a full package soon but dont really want to break the bank what with all the other aspects of my Sim that need attention ...

  6. #6
    300+ Forum Addict autocadplease's Avatar
    Join Date
    Jan 2008
    Location
    British Columbia, Canada
    Posts
    446
    Contribute If you enjoy reading the
    content here, click the below
    image to support MyCockpit site.
    Click Here To Contribute To Our Site

    Wannabeflyer,

    CAM Software
    I do not have the full version of LazyCam - I use an expensive CAM program because I make signs and other 2.5D relief art on my CNC. If you are on a budget and want to do 2.5D, use Google's Sketchup to make your 2.5/3D models, get the free STL converter ruby script for Sketchup and use Freemill. Freemill will cost you nothing but can only do 3D relief work. Between what the free version of LazyCam can do and what FreeMill can do - you should be able to CNC almost anything for free. (There is also a Mach3 post for FreeMill on the net too).

    DXF Drawing:
    Yes, the drawing is the master drawing and you will need to either select the panel and copy it or delete everything else. When I did my MIP I deleted everything except the openings I wanted.
    Grant D.
    Nelson,B.C. Canada
    Win7 32bit, FSX, PM Boeing, TH2GO, GEX, VoxATC

  7. Thanks wannabeaflyer thanked for this post
  8. #7
    150+ Forum Groupie
    Join Date
    Sep 2006
    Location
    Netherlands
    Posts
    165
    Contribute If you enjoy reading the
    content here, click the below
    image to support MyCockpit site.
    Click Here To Contribute To Our Site

    Free too: http://www.cambam.co.uk/

    Hessel
    767 Level-D

  9. #8
    10+ Posting Member JW&Partner's Avatar
    Join Date
    Jan 2006
    Location
    Stuttgart / EDDS
    Posts
    11
    Contribute If you enjoy reading the
    content here, click the below
    image to support MyCockpit site.
    Click Here To Contribute To Our Site

    CNC vector based type

    Hi,

    for engraving panels I would recommend a small program called Schrifttodxf.de with this tool you can create all kind of TT fonts as a vector based double lined font. It also includes a so called single line font which is best for engraving. you can export everything in dxf.

    regards Jörg
    www.simparts.de
    Jörg Weinmann
    Stuttgart
    Germany
    +49 711 / 4709846