Results 91 to 100 of 211
Thread: Spitfire IX Project
-
11-16-2009, 08:42 AM #91
- Join Date
- May 2006
- Location
- Texas
- Posts
- 616
Re: Spitfire IX Project
Wow!!! Your project is insane!
-
Post Thanks / Like - 1 Thanks, 0 Likes, 0 Dislikes
Tony Hill thanked for this post
-
11-16-2009, 11:43 AM #92
Re: Spitfire IX Project
Just awesome Darryl!
-
Post Thanks / Like - 1 Thanks, 0 Likes, 0 Dislikes
Tony Hill thanked for this post
-
11-16-2009, 07:29 PM #93
737NG using Prosim737, Immersive Calibration Pro, Aerosim Solutions motorized TQ & cockpit hardware, CP Flight MCP & FDS SYS1X, SYS2X & SYS4X, FDS PRO FMCs, AFDS units & Glarewings, Matrix Orbital ELEC display, Pokeys Landing & Cruise alt display, Buttkicker Gamers, 3 x BenqMW811ST projectors with a Matrox Th2Go
http://www.aerosimsolutions.com.au
Supporter of MyCockpit.org, please join me in donating!!!
-
Post Thanks / Like - 1 Thanks, 0 Likes, 0 Dislikes
Tony Hill thanked for this post
-
11-16-2009, 09:01 PM #94
Last edited by Westozy; 11-16-2009 at 09:06 PM.
737NG using Prosim737, Immersive Calibration Pro, Aerosim Solutions motorized TQ & cockpit hardware, CP Flight MCP & FDS SYS1X, SYS2X & SYS4X, FDS PRO FMCs, AFDS units & Glarewings, Matrix Orbital ELEC display, Pokeys Landing & Cruise alt display, Buttkicker Gamers, 3 x BenqMW811ST projectors with a Matrox Th2Go
http://www.aerosimsolutions.com.au
Supporter of MyCockpit.org, please join me in donating!!!
-
11-16-2009, 10:07 PM #95
Re: Spitfire IX Project
Thanks guys.
Gwyn, you can have them back when you prise them from my cold, dead hands!!
Joe, not entirely sure that it is just the project that is insane!
Chris, cheers mate.
The constant battle is to produce parts that fit in with Gwyn's. Not easy for a non tradie, non artiste like me. It is comming along nicely now though and the metalwork is getting easier as I learn. The next job is the wood seat and then making the other side cockpit coaming. THAT is not a nice job and matching it to the right side will be "interesting" no doubt.
thanks again guys, always nice to get some encouragement in my delusions!
Darryl"Tony"
In memory of Flt Lt Tony Hill who, on 5 December 1941, at the request of Doctor R V Jones, successfully photographed a small "Würzburg radar" at Bruneval on the French coast. This from a height of only 200 ft, at high speed, under fire and from a camera mounted obliquely behind the cockpit.
-
03-03-2010, 07:09 AM #96
Re: Spitfire IX Project
Well, a long while between posts..a lot of jungle, some bad luck, some carelessness and some challenges in between.....but I made it here at last.
This weekend has been spent almost entirely on the Spitfire, so some fair progress made. The upper structure (save for the door) is complete. The cockpit coaming was a terror but didn't finish up too bad I think. I also put all the labels on the main panel and temp fitted the gun sight.
I also finally got the compass finished and while it is not functional, it does look pretty good and unless I put the real one beside it, it is hard to tell the difference.
The position behind the stick and well forward makes it quite hard to see and the parallax error is huge so navigation on the compass alone must have been a nightmare.
Last of all I did up a couple of templates for the skin. I am still undecided on material but the plastic I used for the templates is pretty durable and if glued onto the formers looks like it would be quite strong. It is not too bad to work with and I may just get some more, cut better pieces and use it as the final skin. I will have to test paint some to see how well it takes. The structure may need a couple of extra longerons if I go that route, as the monocoque effect is not great with the plastic skin.
Lastly, before I went away, I almost finished the seat
Once the skin is done there will only be the wiring and some detailing to do in the pit itself and the computer box and monitor tray to build (plus rearrange my whole office to cut down the desk and fit the pit in......
More soon with any luck.Last edited by Matt Olieman; 03-04-2010 at 07:31 AM. Reason: thumbnail
"Tony"
In memory of Flt Lt Tony Hill who, on 5 December 1941, at the request of Doctor R V Jones, successfully photographed a small "Würzburg radar" at Bruneval on the French coast. This from a height of only 200 ft, at high speed, under fire and from a camera mounted obliquely behind the cockpit.
-
03-03-2010, 12:32 PM #97
Re: Spitfire IX Project
Looks fantastic Tony. Good progress on the pit. Did you consider thin aluminum for the skin? I'm going to use 1/32 (20 guage) aluminum for mine. It's very flexable and easy to work over the frame. Also, where did you get the compass? Original or built?
-
03-03-2010, 08:38 PM #98
Re: Spitfire IX Project
Wow!! Amazing work!!
-
03-03-2010, 11:09 PM #99
Re: Spitfire IX Project
Thank you gents,
Cresent, I considered Aluminium but it will be difficult to fix...I would need to flush rivet the whole thing instead of pop rivets as there is no inner skin or floor in the Spitfire to hide pop rivet bulges. The thin alu would also be susceptible to bending damage, kinks etc.
The compass is a mockup, made from plumbing fittings, fabricated aluminium stop lever, laser engraved numbers and n,s,e,w, and using my "3d" method of back and front engraving on several layers of acrylic. I have a real compass but don't wish to use it due to the radiation (it pegs my dosimeter at about 2 yards!) Put together they are very similar, apart the one is barely distinguishable from the other.
Darryl"Tony"
In memory of Flt Lt Tony Hill who, on 5 December 1941, at the request of Doctor R V Jones, successfully photographed a small "Würzburg radar" at Bruneval on the French coast. This from a height of only 200 ft, at high speed, under fire and from a camera mounted obliquely behind the cockpit.
-
03-12-2010, 05:53 AM #100
Re: Spitfire IX Project
Hi all,
I spent another few hours on the CNC today making switch levers for Darryl's Spitfire sim! I'll post them Monday Darryl...
Cheers Gwyn
737NG using Prosim737, Immersive Calibration Pro, Aerosim Solutions motorized TQ & cockpit hardware, CP Flight MCP & FDS SYS1X, SYS2X & SYS4X, FDS PRO FMCs, AFDS units & Glarewings, Matrix Orbital ELEC display, Pokeys Landing & Cruise alt display, Buttkicker Gamers, 3 x BenqMW811ST projectors with a Matrox Th2Go
http://www.aerosimsolutions.com.au
Supporter of MyCockpit.org, please join me in donating!!!
-
Post Thanks / Like - 1 Thanks, 0 Likes, 0 Dislikes
Tony Hill thanked for this post
Similar Threads
-
Spitfire IX circa 1943
By graemesmith in forum Welcome to MyCockpit New here? Introduce Yourself!Replies: 2Last Post: 05-30-2010, 07:26 AM
Prettys Womans from your city for night
A320 Sound Files Missing