Results 101 to 110 of 211
Thread: Spitfire IX Project
-
03-12-2010, 06:02 AM #101150+ Forum Groupie
- Join Date
- Jun 2008
- Location
- South West, Western Australia
- Posts
- 245
Re: Spitfire IX Project
Magic Gwyn,
Another fine job of work! I suppose now I will have to make the mountings this weekend.
Darryl"Tony"
In memory of Flt Lt Tony Hill who, on 5 December 1941, at the request of Doctor R V Jones, successfully photographed a small "Würzburg radar" at Bruneval on the French coast. This from a height of only 200 ft, at high speed, under fire and from a camera mounted obliquely behind the cockpit.
-
03-12-2010, 06:45 AM #102Boeing 777 Builder
- Join Date
- Jan 2007
- Location
- Perth, Western Australia
- Posts
- 728
Re: Spitfire IX Project
One word Gwyn.......F**WKD!
Ken.
-
03-19-2010, 02:50 AM #103150+ Forum Groupie
- Join Date
- Jun 2008
- Location
- South West, Western Australia
- Posts
- 245
Re: Spitfire IX Project
Well, that was a ^%&& of a night wednesday!! 3 Switch Housing attempts for the IFF and three tossed in the bin (well, the last one went via the back wall of the garage...Dog well out of range!!).....but last night I went back out, made a better wooden "plug" and cut a fourth...that one worked OK, not brilliant but matchbox size is not easy to build with 2mm aluminium. The switch however fits snuggly into the housing and looks OK.
Later I built the Windscreen De-icing unit which went much more smoothly. It is currently drying its third coat of white and tonight gets the topcoat of satin black. Early next week I will get Chris to laser engrave the legend through the black into the white the same way we did on the magneto switch panel.
I'll wait 'til then so I can get some decent light and post all the detail pieces up to date.
Also wrestled with the Sutton Harness for a while but not much progress on that.
The next project will be the fairing that sits over the lines from the Chassis control to the instrument panel frame in the left of the picture of the real thing below. The small wheel is already done but nothing more.
The Windscreen De-Icing Unit can be seen on the right just near the gear handle.
Some random pics:
The rear of the instrument panel with gauges fitted.
The gunsight cleaned up and ready to fit
The TR radio controller ready to be fitted:
The "real" radio unit for the sim will now be mounted in the Remote Contactor frame as I think I am out of room on the left for a mapbox
More soon
."Tony"
In memory of Flt Lt Tony Hill who, on 5 December 1941, at the request of Doctor R V Jones, successfully photographed a small "Würzburg radar" at Bruneval on the French coast. This from a height of only 200 ft, at high speed, under fire and from a camera mounted obliquely behind the cockpit.
-
03-19-2010, 03:14 AM #10475+ Posting Member
- Join Date
- Sep 2009
- Location
- Minnesota, United States
- Posts
- 94
Re: Spitfire IX Project
Beautiful work!!! She's coming along so well!! Not too long ago when I was searching for Spitfire (I still search for some of the projects I see on here in hopes I can tag something to help out), I came across some really unique pieces to a P-38 Lightning and had to talk myself down.
Definitely beautiful to see the work coming together!! I can't wait to see her taking to the skies once again!
Jon
-
03-19-2010, 11:50 PM #105150+ Forum Groupie
- Join Date
- Jun 2008
- Location
- South West, Western Australia
- Posts
- 245
Re: Spitfire IX Project
Thanks Mate!
A little bit more progress before I have a weekend off...
The Fuelcock finished and ready to bolt on. It is built from some garden irrigation fittings and an old landing gear lever I had. the handle is 3mm aluminium pollished and the grip "buttons" are chromed nuts joined by a threaded rod.
Sundry Placards generously cut for me by Chris and his invaluable laser.
A couple of better photos of the compass...again, the degrees disk by Chris and the body out of 120mm plumbing fitting with the "card" holder in 2mm aluminium and a heavy gauge screw onto angle alu. As always a great 3d effect is obtained by multiple layers of acrylic with different details etched on them and painted.
The completed %^%$& of an IFF Destruction unit. Save for the 1 1/2" problem with the GA drawings in the fuselage, this bit has given me more trouble than any other. About 12 hours spent on it all up to finish!! It is a whole 8" long and 2" wide. I should have just bought a housing from Spitfirespares for $300...
A nice family shot to finish..
.
More later in the next week. As always, cheers for the interest."Tony"
In memory of Flt Lt Tony Hill who, on 5 December 1941, at the request of Doctor R V Jones, successfully photographed a small "Würzburg radar" at Bruneval on the French coast. This from a height of only 200 ft, at high speed, under fire and from a camera mounted obliquely behind the cockpit.
-
03-20-2010, 01:02 AM #106150+ Forum Groupie
- Join Date
- Jun 2008
- Location
- South West, Western Australia
- Posts
- 245
Re: Spitfire IX Project
And just before I pack it in for the day....
The controls now painted and ready to drop in and wire:
The De-icing switch, the best alu part I have made so far , very pleased. The legend should get engraved this coming week.
"Tony"
In memory of Flt Lt Tony Hill who, on 5 December 1941, at the request of Doctor R V Jones, successfully photographed a small "Würzburg radar" at Bruneval on the French coast. This from a height of only 200 ft, at high speed, under fire and from a camera mounted obliquely behind the cockpit.
-
03-20-2010, 05:47 AM #107300+ Forum Addict
- Join Date
- Jun 2009
- Location
- holland
- Posts
- 350
Re: Spitfire IX Project
Hi
If I wore a hat , I took it off.
It is just stunning to see such a project,
I`m very impressed by the look of something like this, it is a real tribute to the guys who were fighting for our freedom I must say.
greetz
-
03-21-2010, 07:21 AM #108150+ Forum Groupie
- Join Date
- Jun 2008
- Location
- South West, Western Australia
- Posts
- 245
Re: Spitfire IX Project
I'm very glad you think so Kermit, to honour them (and particularly the relatively unknown Tony Hill) is a big part of my motivation.
Cheers mate
Darryl"Tony"
In memory of Flt Lt Tony Hill who, on 5 December 1941, at the request of Doctor R V Jones, successfully photographed a small "Würzburg radar" at Bruneval on the French coast. This from a height of only 200 ft, at high speed, under fire and from a camera mounted obliquely behind the cockpit.
-
03-24-2010, 08:50 AM #109150+ Forum Groupie
- Join Date
- Jun 2008
- Location
- South West, Western Australia
- Posts
- 245
Re: Spitfire IX Project
An incredible piece of luck this afternoon....picked up the following for just $30 more than it cost me to make the replica!!!
Last time I had the oportunity to buy one it was A$900 and I saw one really bad condition that sold for $550.
I am still shaking my head in disbelief!!"Tony"
In memory of Flt Lt Tony Hill who, on 5 December 1941, at the request of Doctor R V Jones, successfully photographed a small "Würzburg radar" at Bruneval on the French coast. This from a height of only 200 ft, at high speed, under fire and from a camera mounted obliquely behind the cockpit.
-
Post Thanks / Like - 1 Thanks, 0 Likes, 0 Dislikes
Matt Olieman thanked for this post
-
03-26-2010, 04:04 PM #11025+ Posting Member
- Join Date
- Jan 2008
- Location
- Manteca, Ca, USA
- Posts
- 29
Re: Spitfire IX Project
Truly amazing work Tony, look forward to your continued progress. Being a generic cockpit guy I have a deep respect for those of you that go for the replica builds, it's a massive amount of hard work and building genius!
-
Post Thanks / Like - 1 Thanks, 0 Likes, 0 Dislikes
Tony Hill thanked for this post
Reply With Quote
Similar Threads
-
Spitfire IX circa 1943
By graemesmith in forum Welcome to MyCockpit New here? Introduce Yourself!Replies: 2Last Post: 05-30-2010, 07:26 AM
6yo FACECAST LINK 14year GIRLS FORUM : ( )...
YWM RAR JAILBAIT ZOOM