A320 FMGS B49

[jeehell]

Hi
I think ABEAM PTS don't work. It shows the new waypoints on the previous route, not on the shortcut one.
Regards

a picture would probably help

[Leonidas]

a picture would probably help

The shortcut




After pushing ABEAM PTS

[Phpilot]

Heelo folks
in my system i have pc1 ( fmgs server, p3d, PFD, ND;ECAM; SOUND) and PC2 ( MCDU; OVERHEAD; vpilot, asn, etc)
My question is: the PTT buton is in my sidestick ( pc1), and vpilot is in PC2, how i can assign this buton in vpilot?
i have intercom module in pc2.
anybody can help me with this?

[OmniAtlas]

Heelo folks
in my system i have pc1 ( fmgs server, p3d, PFD, ND;ECAM; SOUND) and PC2 ( MCDU; OVERHEAD; vpilot, asn, etc)
My question is: the PTT buton is in my sidestick ( pc1), and vpilot is in PC2, how i can assign this buton in vpilot?
i have intercom module in pc2.
anybody can help me with this?

You need to assign the captain and FO PTT buttons to trigger a single key command in FSUIPC. Use this key in vpilot as your PTT button.

[romeow]

Heelo folks
in my system i have pc1 ( fmgs server, p3d, PFD, ND;ECAM; SOUND) and PC2 ( MCDU; OVERHEAD; vpilot, asn, etc)
My question is: the PTT buton is in my sidestick ( pc1), and vpilot is in PC2, how i can assign this buton in vpilot?
i have intercom module in pc2.
anybody can help me with this?

No idea about vpilot but for IVAO/Teamspeak you need not only FSUIPC but WideFS as well. If it's the same with vpilot I may help you.

[cmdr114b]

I seem to be having a problem getting Hardware connect to "connect".
My system uses the Skalarki profiler which shows the hardware connect in red.
If I reset the hardware using the Hardware connect function in FMGS then I can get a Connect and the profiler changes to green.

I made the silly mistake of updating FMGS, the Skalarki profiler and a new server PC at the same time so I anything is possible.
Also I cannot get the SD, EWD, PFD's or ND,s to turn on once the hardware is connected.
Any suggestions on the best way to debug this would be appreciated.
I have just about exhausted all I can think of to get this working again.

My system runs multiple PC and I have checked all permissions and access rights.

Thanks
John

[cmdr114b]

Update on my issue.
I have changed back to my old server PC and after I force the hardware to connect I can get my screens to start working.
I still have an issue with the new server but I think that is a separate issue that I can look at.

So it looks like my problem is getting FMGS to start my Skalarki hardware has anyone else seen this problem and if so how did you fix it?

One piece of good news is that the EGT needle problem has been fixed in 49.2 so thanks Jeehell for sorting this.
John

[Phpilot]

No idea about vpilot but for IVAO/Teamspeak you need not only FSUIPC but WideFS as well. If it's the same with vpilot I may help you.

hello the problem is solved. the new version of vpilot (2.1) works in network via IP adress( not simconect). Now i have instaled the host version of vpilot in fmgs server PC , and a client version in PC 2. Now is easy to assign PTT in sidestick in PC 1 and works in vpilot (pc2)
Fred.

[FwFreak]

Hi all,

one question. Is there any A320 Model for FSX with IAE Engines available?

Regards Dieter

Hi Dieter!

I use the Project Airbus IAE model without obviously issues.

[pete_fuss]

Hello JL,

since yesterday I have a strange phenomen!
on the Pilot side on a other pc there is all okay!
In the ND of the copilot no weather and no terrain is displayed! I see the angle display and the altitude information at the terrain bottom right but nothing is displayed! i have checked the network sharing, everthing ok and even on the copilot pc i have the a320fmgs reinstalled, without success! Do you have JL, or anyone else an idea or a solution for this phenomen?

i found the issue by my self i`m so stupid!

somone has turned the dim poti to 0! now it work`s again and perfect !

Sorry for this post!

regards Peter