A320 FMGS B35

[OmniAtlas]

Unfortunately even with packs 2 on when I pass 10000 ft the ecam pressurisation memo alerts me again.

[filippoporcari]

ok so the packs off were not the reason.
so it's clear the issue is not procedure related and must be elsewhere.
fil

[stefangr]

Hi JL,

maybe there is still anything wrong with the FMGS server protocol? On several tries today my overhead got disconnected (only the inputs were not working - like my problem some days ago). I rebooted some times, but the problem persists. At first glance, everything is OK, but after some minutes there is a disconnection:

wideFMGS_onServer3.PNG

wideFMGS_onClient3.PNG

Thanks
Stefan

[lmaster]

Hi JL,

Same disconnection problem happening to me. Exactly like Stefan.

Regards,
Joao

[Gregor]

Hi All

Same connection issues here.

And if I install 35.3 from scratch navDBapp.exe is not installed and started, this is only if I install 34.1. Not sure whether this is correct or not.

Regards,
Greg

[Gregor]

Hi All

I have made several installations for testing and have found a missing entry in widefmgs.ini. The port "port6=8008" was missing on the server computer , since I have added it manually, the connections are stable.

[filippoporcari]

i think navdbapp is history now...i suppose jl reworked the navdata and eliminated that app...from 35 it's no more there...but everything working as it should
just for info NO disconnection issues on my side
cheers
fil

[stefangr]

Hi All
I have made several installations for testing and have found a missing entry in widefmgs.ini. The port "port6=8008" was missing on the server computer , since I have added it manually, the connections are stable.

Hi Gregor,

it would be interesting to know if this change has fixed the problem forever. I have not made the change yet, but I have tries where everything is working fine and I also have tries where I get this connection error.

Regards
Stefan

[OmniAtlas]

Hi JL -- if you don't mind me asking, do you know when TOC (hockey stick) will be implemented?

Thank you.

[lmaster]

Hi Gregor,

it would be interesting to know if this change has fixed the problem forever. I have not made the change yet, but I have tries where everything is working fine and I also have tries where I get this connection error.

Regards
Stefan

Hi Stefan,

Are you running the last update issued last night? (17SEP)
JL made some changes and the disconnection issue may be fixed. I tested it (just for 10 min...), but all was working fine.

Regards,
Joao