A320 FMGS beta 30

[stefangr]

Regarding the Sound Module:
The module itself most times says "Not Connected to FMGS Server", whereas A320 Server Module says "Sound: Connected" permanently. Also the Sound Module shows as being version B26 and not B27. Maybe that's a hint?

Thanks
Stefan

[jeehell]

Thats not normal, it should read B27.
Try this one: http://www.jeehell.org/Sound.exe

JL

[stefangr]

OK thanks, installed that one, but unfortunately it doesn't make any change. Still most time showing "Not Connected to FMGS Server" and still having these big response times from time to time

Starter.exe shows also as B26. Is that a problem?

Thanks
Stefan

[jeehell]

I will keep looking. If any other members here have the same issue, please report!

JL

[tom19]

Hi JL,

and thank for latest updates, this is getting better and better
I have a problem with online flying in IVAO. When I turn transponder to mode C on your software, it turn IVAP to STBY. I also can't use my cockpit switch anymore to change the mode (offset $0354). Any ideas for this one?

Thanks and regards,
Tommi

[SimStar001]

Hello JL,

I have also problems with inputs, which actions are delayed for about 4 up to 6 seconds....

Best Regards!

MArco

[Leonidas]

Hi JL
At a first glance:
1. Communication is established when the server starts first. If the clients are open and then the server starts, there is no connection.
2. I can't see my flight plans from MCDU DATA menu.
3. MCDU and FCU freezes when I press PILOTS ROUTES button.
4. My CPflight FCU is working, but LEDs are off. Only the main display's LED are on.
Regards

After last online update:
1. No change
2. It's OK now
3. No change (when MCDU starts after reading database says: "MCDU DISPLAY PROBLEM PLEASE REPORT ISSUE". The same when you try to enter to A/C STATUS.
4. No change (but I discovered when I close and reopen the starter, it's OK. I don't know if this helps you...)

Regards

[Fritz]

First I have to say, thanks JeeHell great job!


I had problems with version 2.6 but version 2.7 works fine for me.

At the first time my MCDU (Flightdeck Solutions) freeze also. I edit the IIT.dll with the IITcreator
and stored it again. In the IITcreator I have seen that there is no longer any distinction between Cpt. and FO
led for MW and MC. I had to adjust the setting. Then it worked again. I have also a small delay after
entry into the MCDU but this is only slightly more than in the previous version but its ok for me.

The FCU of CPFlight works without problems. Initially, I also thought that something is wrong.
But then I noticed that the FCU now start only if the battery in the overhead is switched on.
In the previous version, the FCU started as soon as the FMGS_Server was executed.

The only problem that I had after a perfect flight, was that engine 1 started again even I have switched it off.
But will test it again.

[jeehell]

Hello all,

Ok I will look at the various iisues you all had.

regards,
JL

[jeehell]

Hi,

a small update is available on the automatic updater. I tried to reduce the lag through the network, as well as correct squawk issues.

Cheers,
JL