A320 FMGS B44

[mikatsan]

Hello, i have a problem (from the two previous versions, which is the first a start using Jeehell A320).
When i complete the flight plan, while i fly, sometimes i see the flight path (green line) making some strange path at the arrival procedure. It looks like adding other points, some far away. It looks like a scratch draw. It may correct later and also may appears again.

My folder structure seems to be ok. My terrain (ND) works great and also all the buttons on the EFIS (Airport, Waypoints, etc)

I will provide screenshot later.

Any ideas??

[Leonidas]

Hello, i have a problem (from the two previous versions, which is the first a start using Jeehell A320).
When i complete the flight plan, while i fly, sometimes i see the flight path (green line) making some strange path at the arrival procedure. It looks like adding other points, some far away. It looks like a scratch draw. It may correct later and also may appears again. My folder structure seems to be ok. My terrain (ND) works great and also all the buttons on the EFIS (Airport, Waypoints, etc)
I will provide screenshot later.
Any ideas??

This happens to me often, especially when I change plight plan. Usually these strange lines seem to go to ...infinity, disappear by itself while I get closer. If not, I use DIRECT TO button...

[mikatsan]

This happens to me often, especially when I change plight plan. Usually these strange lines seem to go to ...infinity, disappear by itself while I get closer. If not, I use DIRECT TO button...

Exactly same thing!!!

[fagagomez]

Hi JL


I have a big problem with triple brake.
I use 4 PC in LAN network, all working good.
Triple brake indicator is in the same PC that FO MCDU.
When I set ON Parking brake, nothing happens with brake's needles. But they are working when I press both brake pedals or separately (right or left).
If I set OFF parking brake , nothing happens with brake's needles and neither either when I press brake pedals.




Any ideas?


Best regards,


Fabián Gómez
CHILE

[masterp]

Thanks alot for your hard work JL
Do you have any plan to reduce size of the bird FPA and add PBD (Point/Bearing/Distance) function to FMGS ?

[steinbach72]

Hello Jean Luc,

thank you for the latest version, I had been expected long because of brakes temp problem.
I made several flights with fresh install (on P3D 2.5 latest build) and have to say that nothing changes for me:
During taxi......stable 25°C - braking action does not affect temp. in any way
Airborne.....stable 20°C - whole 20 min. flight
After landing....brakes temp. raises again up to 400°C, with BRAKES LOW, no cooling down 5 min. after landing.

Has it any solution?

Thank you very much

Jiri, Prague

[jeehell]

Jiri, cooling of brakes takes hours, not 5 minutes...
Try to use A/BRK LO until less than 50 kts, then be really gentle on the pedals.

[jeehell]

masterp: I suppose you did not try to add PBD points...

[Leonidas]

The issue using Topcat insists. OUTR TK FUEL XFRD appears on EWD and fuel xfeed from left outer to left inner tank until balance. After that the message remains on EWD!
Regards

[steinbach72]

Jiri, cooling of brakes takes hours, not 5 minutes...
Try to use A/BRK LO until less than 50 kts, then be really gentle on the pedals.

Hi Jean Luc,

thank you for quick reply, |I will try it and report.

Jiri