A320 FMGS B47

[mikatsan]

Thanx for the great update!

I dont know why, but i cannot see any weather. My WXR folder is empty. I tried installing it on host pc also that runs P3D, FMGS and also the ND module is on.

Any ideas??

[OmniAtlas]

Thanx for the great update!

I dont know why, but i cannot see any weather. My WXR folder is empty. I tried installing it on host pc also that runs P3D, FMGS and also the ND module is on.

Any ideas??

Make sure user Everyone has read/write permissions on the folder. And you are running ASN?

I suggest you go to http://www.badbadweather.com and look for some terrible weather. I had some airports with some rain but no data write to the wxr directory (EDDF for example) -- perhaps the precipitation was not severe enough.

[OmniAtlas]

I've achieve some success with the intercom app

However with the transmit button turned off (not green) it seems vatsim atc controllers can still here you. Will continue testing.

All the other features work great! You can tune into VOR by clicking the button, and even adjust the volume appropriately.

My settings:

[imported_Suggy]

Hello, 'OmniAtlas'.

I must confess I am at a loss of understanding the purpose of the intercom app and so maybe when you have time and/or the inclination you can provide an explanation here on the forum of its worth and how you have it set up? I'm intrigued as to why and how you are using it for VATSIM. My current set up is with vPilot and a splitter cable coming out of a networked PC's audio card for the headphone and mic so that both pilot and F/O can listen and communicate with ATC.

All the very best,
Darren Sugden

[jeehell]

Ben

I would need to check that. But the PTT(s) should be defined in FMGS (depending on your hardware...), in your voice app it should be left as an open mike, or maybe "synchronised" with the FMGS action (again depending on your hardware...).
I checked in the code, and the mikes should not "write" to the ext radio out unless the FMGS PTT(s) is(are) pushed in.
Make sure you have the PTT(s) push and release events declared (if not, you should get an ECAM caution after about 90s IIRC).

JL

[mikatsan]

OmniAtlas thanx for the quick reply!

I am using Active Sky 2016 (not Next) but i assume its the same thing....??

The installation was with Administrator user, but i also checked the permissions.

I applied custom weather in LGAV and in AS2016 Map tab, the precipitation is been shown!

Any other idea??

[pete_fuss]

Hello,
i also Canont not see any Weather! In the shared wxr folder ist see 6 dat files! From the Client PC were the path is entered i can also see this dat files! Must i to sonething at the weatherprogramm?
Regards Peter

[jeehell]

Hello,
i also Canont not see any Weather! In the shared wxr folder ist see 6 dat files! From the Client PC were the path is entered i can also see this dat files! Must i to sonething at the weatherprogramm?
Regards Peter

only precipitation zones are show, make sure you have some really bad weather...

[pete_fuss]

Hello JL,
thanks for your fast answere!
Now i will search for a bad weather aera!

One more question, where can i select the Gain and Tilt poti? the same like by the ND brightness!

Regards Peter

[tcane]

Hello JL,

First, a big big thank you for your new and amazing update! It´s so great what you do for the A320 Cockpitbuildercommunity and that´s for low! @ the moment all works fine for me!

Id´like to use my selfmade WX Panel with my OC Hardware. I see there is allready a WX Buttons etc. integration for a Joystickcard, but did you plan an integration in your SIOC_Creator or should we write the script ourselves? Are the Offsets already stored somewhere?

Again, thank you, thank you, thank you, for your hard work!

Cheers Florian