Progamming help with FSBus dll

[RobiD]

Autopilot on/off is momentary switch. It only requires 1 rid on the IO board as there are only 2 wires coming from the switch.
FD is a toggle on/off so only 2 wires and 1 rid
NAV is also a momentary switch 1 rid.
Auto throttle arm switch is toggle still 1 rid

David

[388TH_A]

Autopilot on/off is momentary switch. It only requires 1 rid on the IO board as there are only 2 wires coming from the switch.
FD is a toggle on/off so only 2 wires and 1 rid
NAV is also a momentary switch 1 rid.
Auto throttle arm switch is toggle still 1 rid

David

And that NAV, are you talking about the NAV/GPS switch? flip one side and its NAV and ther side for GPS. So there all 1 rid? next question is do i need to use a on/on switch for any of them and wire the 2 common polls together? if that makes since.....

Trevor

[388TH_A]

I am getting this error when i try to build it

glareshield.cpp(6) : error C2144: syntax error : 'int' should be preceded by '}'
glareshield.cpp(6) : error C2144: syntax error : 'int' should be preceded by ';'

Here is the Code but i dont see any thing wrong! I compare it to other cpp files and there the same so not sure what this is asking of me to fix when there isnt any thing.

#include "stdafx.h"
#include "glareshield.h"

// static variables: accessible by all functions in this module

static   int    ActAlt           = 0;           // actual altitude
static   int    Airspeed         = 0;           // knots
static   int    AirspeedHold     = 0;           // 0 off, -1 on
static   int    AltitudeLock     = 0;           // 0 off, -1 on
static   int    Altitude         = 0;           // feet
static   int    AltitudeSave     = 0;           // feet
static   int    ApproachHold     = 0;           // 0 off, -1 on
static   int    APHeading        = 0;           // 0..359 degrees)
static   int    AutoThrottleArm  = 0;           // 0 off, -1 on
static   int    MachHold         = 0;           //
static   int    MachSpeed        = 0;           // 0 spd, 1 mach
static   int    MasterAP         = 0;           // 0 off, 1 on
static   int    ValFlightDir     = 0;           // 0:  ??
                                                // 1:  ??
                                                // 2:  ??
                                                // 3:  ??
                                                // 4:  ??
static   int    Cmda             = 0;           // 0 off, -1 on
static   int    Cmdb             = 0;           // 0 off, -1 on
static   int    Cwsa             = 0;           // 0 off, -1 on
static   int    Cwsb             = 0;           // 0 off, -1 on
static   int    CockpitATArmed   = 0;           // 0 off, -1 on
static   int    Course           = 0;           // 0..359 degrees)
static   int    Disengage        = 0;           // 0 off, -1 on
static   short  Engine1N1        = 0;           // units: percent
static   short  Engine1N2        = 0;           // units: percent
static   int    EngN1            = 0;           // 0 off, -1 on
static   int    FSATArmed        = 0;           // 0 off, -1 on
static   int    HeadingLock      = 0;           // 0 off, -1 on
static   int    LvlChg           = 0;           // 0 off, -1 on
static   int    Mach             = 0;           // 0.01 units
static   int    Vertspeed        = 0;           // feet/min
static   int    VertspeedHold    = 0;           // 0 off, -1
static	 int	apalt			 = 0;

Trevor

[RobiD]

This should be line 6

static int ActAlt = 0; // actual altitude

But I don't see anything wrong with it. The syntax is the same as my file.

Perhaps Stefan can spot it.

Oh, did you sort out the problem on the DIO board?

[sgaert]

There is no error. Rebuild the complet Project.

[388TH_A]

Well i took out your code David and put back the original code and i was able to build it. So now im going to compare both codes and try to make it so that it works for me and what im doing. I got this and that to work on it just need to narrow it down and make it all work. And as far as the IO PCB i wasnt able to find the problem so i just left it. Im not using enough switches for it to matter so instead of 64 ill just be able to hook up 32 but thats ok i have less then that in the Autopilot box any ways. Well here are some pics of what i have done on the Autopilot. I put this together last night. http://ttd.g11.us/fsbus/autopilot.html Also i am using F/D, A/T, AP, Nav, App, HDG, IAS, Mach, Alt, BC, Y/D, Nav2. So there for i dont need All of these right?

 MkFsObject(FS_ALTITUDE,           "OID", EventHandler, 0x0574, 4,  TP_I32,   FS_NORMAL);
    MkFsObject(FS_AP_MASTER,          "OID", EventHandler, 0x07BC, 4,  TP_UI32,  FS_NORMAL);
  MkFsObject(FS_AP_WINGLEVELER,     "OID", EventHandler, 0x07C0, 4,  TP_UI32,  FS_NONE);
    MkFsObject(FS_AP_NAV1LOCK,        "OID", EventHandler, 0x07C4, 4,  TP_UI32,  FS_NORMAL);
    MkFsObject(FS_AP_HEADINGLOCK,     "OID", EventHandler, 0x07C8, 4,  TP_UI32,  FS_NORMAL);
    MkFsObject(FS_AP_HEADING,         "OID", EventHandler, 0x07CC, 4,  TP_UI32,  FS_NORMAL);
    MkFsObject(FS_AP_ALTITUDELOCK,    "OID", EventHandler, 0x07D0, 4,  TP_UI32,  FS_NORMAL);
    MkFsObject(FS_AP_ALTITUDE,        "OID", EventHandler, 0x07D4, 4,  TP_UI32,  FS_NORMAL);
  MkFsObject(FS_AP_ATTITUDEHOLD,    "OID", EventHandler, 0x07D8, 4,  TP_UI32,  FS_NORMAL);
    MkFsObject(FS_AP_AIRSPEEDHOLD,    "OID", EventHandler, 0x07DC, 4,  TP_UI32,  FS_NORMAL);
    MkFsObject(FS_AP_AIRSPEED,        "OID", EventHandler, 0x07E2, 2,  TP_UI16,  FS_NORMAL);
    MkFsObject(FS_AP_MACHHOLD,        "OID", EventHandler, 0x07E4, 4,  TP_UI32,  FS_NORMAL);
    MkFsObject(FS_AP_MACH,            "OID", EventHandler, 0x07E8, 4,  TP_UI32,  FS_NORMAL);
    MkFsObject(FS_AP_VSHOLD,          "OID", EventHandler, 0x07EC, 4,  TP_UI32,  FS_NORMAL);
    MkFsObject(FS_AP_VS,              "OID", EventHandler, 0x07F2, 2,  TP_I16,   FS_NORMAL);
  MkFsObject(FS_AP_RPMHOLD,         "OID", EventHandler, 0x07F4, 4,  TP_UI32,  FS_NORMAL);
  MkFsObject(FS_AP_RPM,             "OID", EventHandler, 0x07FA, 2,  TP_UI16,  FS_NORMAL);
    MkFsObject(FS_AP_GLIDESLOPEHOLD,  "OID", EventHandler, 0x07FC, 4,  TP_UI32,  FS_NORMAL);
    MkFsObject(FS_AP_APPROACHHOLD,    "OID", EventHandler, 0x0800, 4,  TP_UI32,  FS_NORMAL);
  MkFsObject(FS_AP_BCHOLD,          "OID", EventHandler, 0x0804, 4,  TP_UI32,  FS_NORMAL);
    MkFsObject(FS_AUTOTHROTTLEARM,    "OID", EventHandler, 0x0810, 4,  TP_UI32,  FS_NORMAL);
    MkFsObject(FS_NAV1OBS,            "OID", EventHandler, 0x0C4E, 2,  TP_I16,   FS_NONE);
    MkFsObject(FS_FLIGHTDIRECTOR,     "OID", EventHandler, 0x2EE0, 4,  TP_I32,   FS_NORMAL);
    MkFsObject(FS_ENGINE1N2,          "OID", EventHandler, 0x0896, 2,  TP_I16,   FS_NORMAL);
    MkFsObject(FS_ENGINE1N1,          "OID", EventHandler, 0x0898, 2,  TP_I16,   FS_NORMAL);

[388TH_A]

Like this im thinking about taking this out just seems like i dont need it all just for one switch.

        case C_SCMDA:
            if ((val==0) && (Disengage == 0)) // button push only
            {
                //EventHandler(S_SADFSWAP, 0, 0); // sound small switch

                Cmda = (Cmda == 0) ? 1 : 0; // toggle
                if (Cmda == 0)
                    FsbusWrite(C_LCMDA, 0);
                else
                {
                    FsbusWrite(C_LCMDA, 1);
                    FsbusWrite(C_LCMDB, 0);
                    FsbusWrite(C_LCWSA, 0);
                    FsbusWrite(C_LCWSB, 0);
                    FsWrite(FS_AP_MASTER, 1);
                }
            }
            break;
        case C_SCMDB:
            if ((val==0) && (Disengage == 0)) // button push only
            {
                //EventHandler(S_SADFSWAP, 0, 0); // sound small switch
                Cmdb = (Cmdb == 0) ? 1 : 0; // toggle
                if (Cmdb == 0)
                    FsbusWrite(C_LCMDB, 0);
                else
                {
                    FsbusWrite(C_LCMDB, 1);
                    FsbusWrite(C_LCWSA, 0);
                    FsbusWrite(C_LCWSB, 0);
                    FsWrite(FS_AP_MASTER, 1);
                }
            }
            break;
       case C_SCWSA:
           if ((val==0) && (Disengage == 0)) // button push only
           {
               //EventHandler(S_SADFSWAP, 0, 0); // sound small switch
               Cwsa = (Cwsa == 0) ? 1 : 0; // toggle
               if (Cwsa == 0)
                   FsbusWrite(C_LCWSA, 0);
               else
               {
                   FsbusWrite(C_LCMDA, 0);
                   FsbusWrite(C_LCMDB, 0);
                   FsbusWrite(C_LCWSA, 1);
                   FsbusWrite(C_LCWSB, 0);
                   FsWrite(FS_AP_MASTER, 1);
               }
            }
            break;
        case C_SCWSB:
            if ((val==0) && (Disengage == 0)) // button push only
            {
                //EventHandler(S_SADFSWAP, 0, 0); // sound small switch
                Cwsb = (Cwsb == 0) ? 1 : 0; // toggle
                if (Cwsb == 0)
                    FsbusWrite(C_LCWSB, 0);
                else
                {
                    FsbusWrite(C_LCMDA, 0);
                    FsbusWrite(C_LCMDB, 0);
                    FsbusWrite(C_LCWSA, 0);
                    FsbusWrite(C_LCWSB, 1);
                    FsWrite(FS_AP_MASTER, 1);
                }
            }
            break;
        case C_SAPDISENGAGE:
            if (val==0) // button push only
            {
                //EventHandler(S_SADFSWAP, 0, 0); // sound small switch
                Disengage = (Disengage == 0) ? 1 : 0; // toggle
                if (Disengage == 0)
                {
                    FsbusWrite(C_LAPDISENGAGEL, 0);
                    FsbusWrite(C_LAPDISENGAGER, 0);
                }
                else
                {
                    FsbusWrite(C_LAPDISENGAGEL, 1);
                    FsbusWrite(C_LAPDISENGAGER, 1);
                    FsbusWrite(C_LCMDA, 0);
                    FsbusWrite(C_LCMDB, 0);
                    FsbusWrite(C_LCWSA, 0);
                    FsbusWrite(C_LCWSB, 0);
                    FsWrite(FS_AP_MASTER, 0);
                }
            }
            break;

Also when i flip my master autopilot switch on or off i get this error and same thing with when ever i flip my flight dir switch. Dont get me wrong it works fine but also when ever i flip the switch and get that error my PC speaker makes a beep and i dont really wana hear it beep every time.

[RobiD]

Good work on the MCP.

It's a lot of work but worth it when it does what it should.

Let me know what the problem with the code was when you find it.

David

Oh, found the charger for the camera. I've cut out the decks for the altimeter (bezel, motor deck, gear deck etc), and I'm about to cut and engrave the 10000 needle so I'll try to take a couple of pics of that and post them.

[388TH_A]

Nice well take them soon i wana see your cockpit and everything

[RobiD]

Ok, here's some pics.

First one is of the cnc close up cutting the engraving the 10000 needle.




Second is of the whole cnc set up. Of the two computer cases, top is the computer and the bottom houses the driver boards and break out board for the cnc which is parallel driven.



Third is the cut out 10000 needle.



Fourth is the 10000 needle inside the front of the gauge. I have cut all the pieces but have not painted or fitted the lighting. Also, just a black and white printout of the face of the gauge, but it gives you an idea of how the 10000 needle looks.




I'll try to get some photos of the inside of the sim ie: mcp, glideslope indicator etc. oh, not to mention the aircore fuel level, fuel pressure, oil pressure, amps etc gauges.

David