Results 41 to 50 of 83
-
04-26-2012, 12:19 AM #41
Re: Aerosim Solutions B737 simulator rebuild
These pics are how I assembled the discs...
Trim-wheel-4.jpg
Three pieces that make up the main disc assembly
Trim-wheel-5.jpg
Superglued and clamped to form the dish shape
Trim-wheel-6.jpg
The conical disc for the centre hub, made from the offcuts of the rings glued together
Trim-wheel-7.jpg
Machining the disc into shape, there are five parts glued together
Cheers Gwyn
Aerosim Solutions
737NG using Prosim737, Immersive Calibration Pro, Aerosim Solutions motorized TQ & cockpit hardware, CP Flight MCP & FDS SYS1X, SYS2X & SYS4X, FDS PRO FMCs, AFDS units & Glarewings, Matrix Orbital ELEC display, Pokeys Landing & Cruise alt display, Buttkicker Gamers, 3 x BenqMW811ST projectors with a Matrox Th2Go
http://www.aerosimsolutions.com.au
Supporter of MyCockpit.org, please join me in donating!!!
-
04-29-2012, 11:26 PM #42
Re: Aerosim Solutions B737 simulator rebuild
A little more progress on the trim wheels...
Trim-wheel-8.jpg
Trim-wheel-9.jpg
Trim-wheel-10.jpg
Cheers Gwyn
Aerosim Solutions
737NG using Prosim737, Immersive Calibration Pro, Aerosim Solutions motorized TQ & cockpit hardware, CP Flight MCP & FDS SYS1X, SYS2X & SYS4X, FDS PRO FMCs, AFDS units & Glarewings, Matrix Orbital ELEC display, Pokeys Landing & Cruise alt display, Buttkicker Gamers, 3 x BenqMW811ST projectors with a Matrox Th2Go
http://www.aerosimsolutions.com.au
Supporter of MyCockpit.org, please join me in donating!!!
-
04-30-2012, 11:11 AM #43
Re: Aerosim Solutions B737 simulator rebuild
Hi Gwyn.
I see that you are sticking with the four red atc buttons on the yoke which relate to the default FS ATC system. You have used this method for some time, and I wonder if you have considered Vox ATC? I intend to do as you have done with my FS ATC as I feel that it is adequate enough.
Do you have sound seperation so that you only hear ATC through the headphones and the other sounds on speakers?
Love your work!
TONY, Plymouth UK
-
04-30-2012, 07:23 PM #44
Re: Aerosim Solutions B737 simulator rebuild
Hi Tony,
The truth is I don't really use ATC all that much, on a rare occasion I'll have a go but I prefer to write an follow my own flight plans usually high altitude IFR. ATC complain too much when swoop down to beat up a nice looking valley in the 737!!!
My sim has been out of action for two years while the business has been growing but I am certainly enjoying getting back into it again. I finished the high gloss black on the trim wheels last night and tonight I'll be masking them up for the white visibility markers. The TQ handles are finished and work on the TQ housing can begin after the trim wheels are done. I've ordered all the parts to make the auto throttle clutches and drives, I'll be sharing this build and design as I don't intend to market B737TQs, there are already plenty available.
Cheers GwynLast edited by Westozy; 04-30-2012 at 07:25 PM.
737NG using Prosim737, Immersive Calibration Pro, Aerosim Solutions motorized TQ & cockpit hardware, CP Flight MCP & FDS SYS1X, SYS2X & SYS4X, FDS PRO FMCs, AFDS units & Glarewings, Matrix Orbital ELEC display, Pokeys Landing & Cruise alt display, Buttkicker Gamers, 3 x BenqMW811ST projectors with a Matrox Th2Go
http://www.aerosimsolutions.com.au
Supporter of MyCockpit.org, please join me in donating!!!
-
05-05-2012, 07:14 AM #45
Re: Aerosim Solutions B737 simulator rebuild
Hi all,
After a few dramas with the spray painting the trim wheels are finished. The first paint I used wouldn't harden and I had to get it all off and start from scratch, what a mess! The second time around I used a tough epoxy enamel, it took ten hours to dry but the result was worth the wait. Drawings are well advanced on the TQ's internals and that will be the next step.
Trim-wheels-10.jpg
Trim-wheels-11.jpg
Trim-wheels-12.jpg
The wheels won't be going on the product list, I think they are in the too hard section!
Cheers Gwyn
Aerosim Solutions
737NG using Prosim737, Immersive Calibration Pro, Aerosim Solutions motorized TQ & cockpit hardware, CP Flight MCP & FDS SYS1X, SYS2X & SYS4X, FDS PRO FMCs, AFDS units & Glarewings, Matrix Orbital ELEC display, Pokeys Landing & Cruise alt display, Buttkicker Gamers, 3 x BenqMW811ST projectors with a Matrox Th2Go
http://www.aerosimsolutions.com.au
Supporter of MyCockpit.org, please join me in donating!!!
-
05-05-2012, 03:42 PM #46
Re: Aerosim Solutions B737 simulator rebuild
No such thing as too hard! Just the "an arm and a limb and the life of my first born" category...Last edited by Efe Cem Elci; 05-07-2012 at 08:49 AM. Reason: changed cartoon
-
05-07-2012, 08:27 AM #47
- Join Date
- Nov 2008
- Location
- Europe
- Posts
- 1,934
Re: Aerosim Solutions B737 simulator rebuild
I have deleted some threads here because as a moderator I believe it was the responsible thing to do. Should you have any further queries or criticisms then please feel contact me, this was done in respect of Gwyns thread. Thank you. Alex
GA or the Highway!
-
Post Thanks / Like - 2 Thanks, 0 Likes, 0 Dislikes
-
05-07-2012, 09:20 AM #48
-
05-07-2012, 12:31 PM #49
- Join Date
- Apr 2007
- Location
- N/A
- Posts
- 192
Re: Aerosim Solutions B737 simulator rebuild
The wheels looks awesome! But - how much do they weigh? If you are going to motorize them (even just for show), a big mass has a big momentum. Not easy to stop...
I have the Simparts TQ (not finished yet), and the resin wheels on that one are not that heavy. I plan to motorize them, but just for "show". A DC motor, a relay card and perhaps a switch activated by placing the flaps handle to zero flaps. The switch then switches between two voltages, simulating the different speeds on the trim wheels (faster when flaps are extended).
-
05-07-2012, 07:35 PM #50
Re: Aerosim Solutions B737 simulator rebuild
Hi Vidarf,
The trim wheels will be fully functional and driven by a 12VDC cordless drill motor with its own gearbox, it will also act as a brake when
de-energized, you are right they are quite heavy so I intend to use a soft belt drive which will reduce a shock load when the motor is activated. I fitted dual pole rocker switches to my yoke handles and one side of the switch will energize the trim motors through a pair of directional relays, the other side of the dual pole switch will be the back up trim that can be assigned to trim up trim down if there are any issues with the trim pot, (I had issues on my old PMDG set up where the trim pot operation was a bit vague.
I have just finished designing and 18:1 reduction gear train which will make the trim indicators work and also a 10 turn pot for trim adjustment. The CAD drawing is now up to about 30 hours but it is nearly completed, I just have to do the speedbrake drive and a few other minor parts. I'm really keen to start assembly. The levers are finished and I have the auto throttle motors and drives ready. I've "cheated" on the flap and speedbrake lightplates by ordering IBL panels from Simparts in Germany, these are 5VDC plug in units that will save some time for me.
The plan is to launch the beast this coming Christmas then I can re open Aerosim Solutions. I am planning to market the auto throttle drive I have designed for my own TQ, I think it will be a winner like the generic throttle base!
Cheers Gwyn
Aerosim Solutions
737NG using Prosim737, Immersive Calibration Pro, Aerosim Solutions motorized TQ & cockpit hardware, CP Flight MCP & FDS SYS1X, SYS2X & SYS4X, FDS PRO FMCs, AFDS units & Glarewings, Matrix Orbital ELEC display, Pokeys Landing & Cruise alt display, Buttkicker Gamers, 3 x BenqMW811ST projectors with a Matrox Th2Go
http://www.aerosimsolutions.com.au
Supporter of MyCockpit.org, please join me in donating!!!
Similar Threads
-
Aerosim Solutions B737 simulator rebuild
By Westozy in forum Westozy's Mechanical EngineeringReplies: 5Last Post: 09-09-2010, 11:31 PM -
New Boeing 777 TQ from Aerosim Solutions
By vybhav in forum MyCockpit News and AnnouncementsReplies: 3Last Post: 07-07-2010, 06:09 AM -
Aerosim Solutions 737
By Westozy in forum My Cockpit UpdateReplies: 12Last Post: 10-18-2007, 06:33 PM
Prettys Womans from your city for night
A320 Sound Files Missing