A320 FMGS B44

[Fritz]

I have also reassign the switch for the CARGO SMOKE in ITT Creator.
I tried the Test switch and it should happen
Pressing this button for at least 3 seconds, and until it is released :

Tests the smoke detectors in sequence,
Turns on the red SMOKE lights twice, and displays the ECAM warning,
Turns on the amber DISCH lights.

Nothing happens on my Overhead.

[jeehell]

What hardware did you use?
What LEDs assignations did you use?

JL

[Fritz]

Hi JeeHell,

stupid mistake on my part. I have installed an older version and therefore also wrong assignments.
I had no longer remembered. I'm going to modify the LED assignment and replace the Korrys later.

The Korrys are wired to a FDS SYS1X.

[Hikmat]

Hi JH,

OVRD panel does not respond clicks on client PC(for exp: i can not switch on battery) however i can see ext pwr avail light on the panel when applied from FS

wideFMGS shows connected to the server

thanks in advance

[jeehell]

Hi

probably an issue with administrator rights somewhere.

JL

[FSlikerX]

Hi,

I`m unbale to find an Offset for the EMER EXIT LT so I would like to ask if there is an Offset for this.

[FSlikerX]

or is there an Offset for the CARGO SMOKE ?

[Fritz]

In ITT Creator I have assigned the EVAC switch.
When this switch is pressed, EVAC should lights red and a horn sounds.
On my Overhead the switch lights but no horn sounds.

I have also assigned the EMER switch in ITT Creator.
If this switch is pressed, high-low chime should sounds three times, on all of the loudspeakers
and ON light flashes in white and the CALL light flashes in amber.
On my Overhead the switch flashes but no sound is heard.

Both switches are wired to a FDS-SYS1X Board.


I still have the Problem with the EMER EXIT LT switch
When I press on Apply Configuration I get the error message

Phase 2
ERROR! - EMEREXITUP -
Line: 211 Var 102, name EMEREXITUP, Link IOCARD_SW, Device 0, Input 34
%FAILED%

I could not identify the error. Did anyone else have this problem?
The switch is wired to an OC Interface Board.

[jeehell]

Hi,

I will add some FSUIPC offsets in next release.

The EVAC horn sound is corrected in next release.

I'll add the high-low chimes someday for the emer call, not a big priority.

The EMER EXIT LT switch compilation bug in SIOC Creator is corrected in next version, it will come soon.

JL

[GoingForGold]

I have a question regarding the PTU sound: As soon as one engine is running, I can hear the PTU sound until the other engine is stable. So the sound is repeated over and over again. I thought that this should only be played once? Or is this intentional?